When IP Source Guard with source IP filtering is enabled on an interface, which feature must be enabled on the access VLAN for that interface?
A . DHCP snooping
B . storm control
C . spanning-tree portfast
D . private VLAN
IP Source Guard Configuration Guidelines
You can configure static IP bindings only on nonrouted ports. If you enter the ip source binding macaddress vlan vlan-id ip-address interface interface-id global configuration command on a routed interface, this error message appears:
Static IP source binding can only be configured on switch port.
When IP source guard with source IP filtering is enabled on an interface, DHCP snooping must be enabled on the access VLAN for that interface.
If you are enabling IP source guard on a trunk interface with multiple VLANs and DHCP snooping is enabled on all the VLANs, the source IP address filter is applied on all the VLANs.
You can enable this feature when 802.1x port-based authentication is enabled. Reference: http:// www.cisco.com/c/en/us/td/docs/switches/lan/catalyst2960x/ software/15- 0_2_EX/security/ configuration_guide/b_sec_152ex_2960-x_cg/b_sec_152ex_2960- x_cg_chapter_01110.html