Interface FastEthernet0/1 is configured as a trunk interface that allows all VLANs. This command is configured globally: monitor session 2 filter vlan 1 – 8, 39, 52 What is the result of the implemented command?

Interface FastEthernet0/1 is configured as a trunk interface that allows all VLANs. This command is configured globally: monitor session 2 filter vlan 1 – 8, 39, 52 What is the result of the implemented command?
A . All VLAN traffic is sent to the SPAN destination interface.
B . Traffic from VLAN 4 is not sent to the SPAN destination interface.
C . Filtering a trunked SPAN port effectively disables SPAN operations for all VLANs.
D . The trunk’s native VLAN must be changed to something other than VLAN 1.
E . Traffic from VLANs 1 to 8, 39, and 52 is replicated to the SPAN destination port.

View Answer

Answer: E

Explanation:

The "monitor session filter" command is used to specify which VLANS are to be port mirrored using SPAN. This example shows how to monitor VLANs 1 through 5 and VLAN 9 when the SPAN source is a trunk interface: Switch(config)# monitor session 2 filter vlan 1 – 5 , 9 Reference: http://www.cisco.com/c/en/ us/td/docs/switches/lan/catalyst4500/12- 2/25ew/configuration/guide/conf/span.html/ index.html#wp1066836