NS0-184 NetApp Certified Storage Installation Engineer, ONTAP exam is a hot Network Appliance certification exam, Exam4Training offers you the latest free online NS0-184 dumps to practice. You can get online training in the following questions, all these questions are verified by Network Appliance experts. If this exam changed, we will share new update questions.
Click the Exhibit button.
What are two functions of the four Ethernet switches in the supported configuration that is shown in the exhibit? (Choose two.)
A . to provide a direct connection for the SnapMirror Synchronous (SM-S)
B . to install cross-site cluster management switches
C . to provide connectivity for NVRAM over iWARP
D . to enable SyncMirror replication
Answer: A,C
Your customer wants a newly installed AFF C190 cluster to send SNMP notifications to a trap host called OVERWATCH01.
In this scenario, which two statements are correct? (Choose two.)
A . Configure an SNMP community string on the cluster.
B . Configure DNS on the cluster.
C . Configure a trap host on the cluster.
D . Configure a firewall policy and allow SNM
Answer: BC
You are setting up a peer relationship between two ONTAP clusters.
In this scenario, which two statements are true regarding authentication?
A . Peering authentication status can be verified with the cluster peer show command.
B . Peering authentication can be configured using LDAP users and groups.
C . Peering authentication is required before enabling peering encryption.
D . Peering authentication can use an ONTAP generated passphrase.
Answer: A,D
Explanation:
Reference: https://docs.netapp.com/us-en/ontap/peering/create-cluster-relationship-93-later-task.html
Your customer currently has a 4-node AFF A400 cluster that runs ONTAP 9.8, with two NS224 shelves that are connected to each HA pair. The customer needs to add additional capacity to the cluster.
Which two actions would enable the customer to accomplish this task? (Choose two.)
A . Connect the new NS224 shelves to the existing NS224 shelves and adjust the shelf IDs.
B . Connect the new NS224 shelves to the existing Cisco Nexus 3232C switches.
C . Deploy a new AFF A400 to the cluster.
D . Deploy new, dedicated, storage switches for the new NS224 shelves.
Answer: A,C
Explanation:
Reference: https://docs.netapp.com/us-en/ontap-systems/ns224/hot-add-shelf.html#prepare-an-aff-a700-aff-a800-or-aff-a400-ha-pair-to-hot-add-a-second-shelf
After you install an AFF A700 2-node cluster with DS224C shelves, Config Advisor reports that your SAS cabling is in mixed-path HA. You expected the SAS cabling be in quad-path HA.
You physically verify the LED status on the controllers and the shelves and notice no irregularities. However, a reboot of the SAS expander does not change the output.
In this scenario, what should you do next?
A. Open a case with NetApp Support and turn off the disk shelves until the issue is solved.
B. Disconnect the disk shelves from the controller and run Config Advisor again.
C. Re-seat the SAS IO modules of the affected AFF A700 controller.
D. Use multipath HA because it is the only cabling supported on an AFF A700 controller.
Answer: C
You are installing a new six-node ONTAP 9.8 cluster. You have completed the initial configuration of the cluster interconnect switches and the ONTAP cluster.
In this scenario, which feature should you enable?
A . cluster switch logging
B . cluster switch health monitor
C . IPv6 on all cluster ports
D . data center bridging protocol
Answer: B
Explanation:
Reference: https://docs.netapp.com/us-
en/ontap/pdfs/sidebar/Configure_network_ports__cluster_administrators_only_.pdf
A customer wants to enable SnapMirror Synchronous across their environment. The customer must ensure that SnapMirror Synchronous will work across the environment.
In this scenario, which two statements are true? (Choose two.)
A . A SnapMirror license is required on both the source cluster and the destination cluster.
B . A SnapMirror Synchronous license is required on both the source and destination clusters.
C . A SnapMirror license is not required on both the source cluster and the destination cluster.
D . A SnapMirror Synchronous license is required on the source cluster.
Answer: B,C
Click the Exhibit button.
You are asked to install a new cluster with six FAS8060 nodes. While running Config Advisor, you see the messages shown in the exhibit. The customer does not want ACP cabled on their cluster.
Which two actions would allow the installation to be completed successfully? (Choose two.)
A . Advise NGS that the customer has a controller in an unsupported state.
B . Advise the customer that they must acknowledge that they are not using ACP on the installation.
C . Advise the sales team that the customer is operating without ACP and that the customer is asking you to leave it that way.
D . Advise the customer that the error will cause the controller to not operate properly and create an unsupported state.
Answer: BC
You are using Broadcom BES-53248 switches for a cluster interconnect in a base configuration.
In this scenario, what is the minimum number of ISLs supported between the switches?
A . 1
B . 2
C . 3
D . 4
Answer: B
Explanation:
Reference: https://docs.netapp.com/us-en/ontap-systems-switches/pdfs/sidebar/BES_53248_Switches.pdf (3)
You completed a 2-node AFF A700 installation according to the poster. You run the disk show -fields owner command and notice that all drives are assigned to node 1.
In this scenario, which tool would you use to access documentation and guidelines to solve the issue?
A . Active IQ Unified Manager
B . Active IQ One Collect
C . NET2
D . NetAppDocs
Answer: D
Explanation:
Reference: https://github.com/NetAppDocs