Your Aruba CX 6300 VSF stack has OSPF adjacency over SVI 10 with LAG 1 to a neighboring device.

Your Aruba CX 6300 VSF stack has OSPF adjacency over SVI 10 with LAG 1 to a neighboring device.

The following configuration was created on the switch:

A)

B)

C)

D)

A . Option A
B. Option B
C. Option C
D. Option D

View Answer

Answer: C

Explanation:

The correct configuration for OSPF adjacency over SVI 10 with LAG 1 to a neighboring device is shown in Option C.

The configuration includes the following steps:

* Create a VLAN 10 and assign it a name and an IP address.

* Create a LAG 1 and assign it a name and a mode of dynamic or static.

* Add member ports to LAG 1 and enable the LAG interface.

* Assign VLAN 10 as the untagged VLAN for LAG 1.

* Enable OSPF on the switch and assign it a router ID.

* Create an OSPF area 0 and add SVI 10 as an interface in that area.

Option A is incorrect because it does not enable OSPF on the switch or create an OSPF area. Option B is incorrect because it assigns VLAN 10 as the tagged VLAN for LAG 1, which is not compatible with SVI 10.

Option D is incorrect because it does not add member ports to LAG 1 or enable the LAG interface.

References:

https://techhub.hpe.com/eginfolib/Aruba/OS-CX_10.04/5200-6692/GUID-BD3E0A5F-FE4C-4B9B-BE1D-FE7D

https://techhub.hpe.com/eginfolib/Aruba/OS-CX_10.04/5200-6692/GUID-BD3E0A5F-FE4C-4B9B-BE1D-FE7D