SAP C_TS422_1909 SAP Certified Application Associate - SAP S/4HANA Production Planning and Manufacturing Online Training

If you want to through the SAP C_TS422_1909 exam to make a stronger position in today’s competitive IT industry, then you need the strong expertise knowledge and the accumulated efforts. And passing the SAP Certified Application Associate C_TS422_1909 exam is not easy. Perhaps through SAP C_TS422_1909 exam you can promote yourself to the IT industry. But it is not necessary to spend a lot of time and effort to learn the expertise. You can choose Exam4Training SAP C_TS422_1909 SAP Certified Application Associate – SAP S/4HANA Production Planning and Manufacturing Online Training. This is training product that specifically made for IT exam. With it you can pass the difficult SAP Certified Application Associate – SAP S/4HANA Production Planning and Manufacturing exam effortlessly.

Page 1 of 3

1. You want to insert an operatio at a certain time on work center. The planning direction is forward. The disired dispatching time concides with an operation that has previously been dispatched .

How does the insertion take place?

The previously dispatched operation stays as is; the new operation is inserted after the the dispatched operation.

The previously dispatched operation stays as is; the new operation is inserted before the the dispatched operation.

The new operation is inserted at the desired time; the previously dispatched operation is moved forward.

The new operation is inserted at the desired time; the previously dispatched operation is moved backward.

2. Which information is required when you created a production master in SAP S/4HANA?

Selective screen for views

Product type

Base unit of measure

Industry sector

3. Why would you use phantom assemblies?

To simplify the structure of bills of materials

To make the assignment of components easier

To reduce the number of changes required in bills of materials

To reduce the number of material masters

To increase the number of planning levels

4. Which SAP application can be used for forcasting in Supply Chain Planning?

Material Requirements Planning (MRP)

Supply Chain Management(SCM)

Integrated Business Planning (IBP)

Capacity Requirements Planning (CRP)

5. For what production type are production orders used?

Process manufacturing processes

Replenishment controlled by control cycles

Discrete manufacturing processes

Period and quantity-oriented production

6. You want to reduce planning efforts for B/C materials .

Which planning procedure do you recommend?

Material requirements planning

Manual planning without check

Forecast planning

Consumption-based planning

7. You are working with planning strategy 40 (Planning-with-final assembly)

When does consuption of planned independent requirements take places?

When you deliver a sales order

When the MRP result are saved

When you create a sales order

When you create a planned order

8. An issue storage location was NOT found through the work center, bill of material (BOM) item, or material master .

What determines whether the storage location can be derived from the production version?

MRP group

Plants parameters

MRP controller

MRP profile

9. How can you achive a feasible production plan in case of capacity constraints?

Select an alternative mode on a resource.

Adjust the available capacity.

Reduce the planning window

Form optimum sequence to reduce setup times

Execute an infinite production planning run

10. Which of the following is valid sequence of the main activities in production order processing?

Creation, availability check, release, material widrawal, confirmation

Creation, release, printing, goods issue, confirmation, goods receipt

Creation, printing, release, goods issue, confirmation, goods receipt

Creation, release, settlement, goods issue, confirmation, goods receipt

Page 2 of 3

11. What is the difference between co-products and by-products?

Only co-products appear in the process or production order settlement rule.

Only co-products can be manufactured in isolation from the main product.

Only co-products are identified by a special item category in the bill of material (BOM).

Only by-products have a zero inventory valuation.

12. Where do you maintain the work center that represents the production line for repetitive manufacturing?

Production version

Routing

Repetitive manufacturing profile

Production cost collector

13. You want to use capacity availability checks for production orders .

Which settings have to be made for this?

A checking rule must be assigned in the checking control

The PRT Availability Check must be set in the checking control.

An overall profile must be assigned in the checking control.

The Relevant for Finite Scheduling indicator must be set

14. For a production version to be valid and consistent what requirements must be fulfilled?

The assigned routing and bill of materials (BOM) must be valid in the entire validity period.

The assigned routing must NOT have alternative sequences.

The deletion flag must NOT be set for the bill of materials (BOM) or the routing.

The lot size range must be within the lot-size range of the assigned routing.

The assigned routing must be a rate routing.

15. Mode selection is one of the scheduling options available in Advanced Planning in SAP S/4HANA. When can you use mode selection?

When multiple operations are maintained for one product

When alternate resources are used within one operation

When multiple planned orders exist on one resource

When multiple production versions are maintained for one product

16. What does the material type influence?

Which plant specific status is allowed

Which material master views can be maintained

Which document types are allowed

Whether the material is produced in-house, procured externally or bouth

17. What type of time element can be reduced by strategy settings while dispatching?

Transportation time

Wait time

Queue time

Setup time

18. How can you limit the validity of a bill of material (BOM)?

By plant

By material type

By industry

By period

19. Your project used process orders for the production of liquid chemicals.

What can you define to ensure that the production flow happens only in physically connected tanks?

Operation network

Work center hierarchy

Setup matrix

Resource network

20. Which standard item categories can you select inside a bill of material (BOM)? Note: There are 2 correct answers to this question.

Non-stock item

Work item

Variable-size item

WBS item

Page 3 of 3

21. Which item statuses can you select inside a material BOM?

Service

Sales

Quality management

Engineering

22. Your client is asking for your advice on material master numbering in SAP S/4HANA .

What do you need to consider?

The maximum mater all number length is 40 for external numbers and 18 for internal numbers

The number of leading zeros for internal numbers is client-specific.

In Customizing you can decide by material type whether to use the long material number.

The display template for material numbers applies to all clients.

23. Which alternative item strategies are available in bills of materials (BOM) in SAP S/4HANA?

First in first out (FIFO)

100% check

Simultaneous

By usage probability

24. What could be the reason for multiple commitment of invidula capacities, where several operations have the same scheduled dates on a work center (or resource) after planing?

The work center has several invidula capacities.

The finite Scheduling indicator is NOT set in the strategy profile.

The Change Planning Direction indicator is set in strategy profile.

Alternative work centers are fully occupied.

25. You want to set up a make-to-order planing scenario for finished material. The bil of material contains two components: one should be procured for each sales order individually, the other one shold be procured jointly for all independent requirements. Forcasting for the finished product is NOT possible .

Which setting do you make to achive this?

Choose planning strategy 50 (Planning whthout final assembly) and select corresponding Mixed MRP indicator

Choose planning strategy 20 (Make-to-order) and select corresponding Invidual/collective indicator

Choose planning strategy 20 (Make-to-order) and select corresponding Mixed MRP indicator

Choose planning strategy 50 (Planning whthout final assembly) and select corresponding Invidual/collective indicator

26. What happens to this dependent requirement when you convert the planned order into a

production order?

They are converted into a schedule line.

They are converted into a reservation.

They are converted into a production order.

They are converted into a planned order.

27. You have maintained the parameters for simple discontinuation in the material master of a component .

Which business process will be affected if the available stock is zero and the discontinuation date is in the past?

Production order release

Material requirements planning

Backflushing

Kanban

28. During production order creation, several valid production versions are found .

How does the system choose the production version?

Planned order or material number

Valid period or sale order

Alphanumeric or quota arrangement

Lot size or material cost

29. Which of the following are possible configuration steps when setting up the alert monitor in Advance Planning?

Create object selection variant for transportation lane-related alerts.

Create object selection variant for product-related alerts.

Assign the overall profile to the authorization profile.

Assign the alert profile to the overall profile.

30. What do you use to dispatch operations from planned orders so that the production plan can be fulfilled?

Material Requirements Planning (MRP)

Capacity Requirements Planning (CRP)

Supply Network Planning (SNP)

Demand Planning (DP)

Latest C_TS422_1909 Dumps Valid Version with 80 Q&As

Latest And Valid Q&A | Instant Download | Once Fail, Full Refund

Instant Download C_TS422_1909 PDF