What is the most likely reason that the LTM device has entered into Aggressive Mode Adaptive Reaping?

AN LTM Specialist receives reports that an external company application is having reliability issues. The F5 Administrator finds the following in /vat/log/ltm file.

The LTM Specialist determines that the F5 LTM device is entering into Aggressive Mode Adaptive Reaping, which is causing the site reliability issues.

What is the most likely reason that the LTM device has entered into Aggressive Mode Adaptive Reaping?
A . The LTM device exceeds licensed traffic limits.
B . The site has too many licensed modules.
C . The LTM device has not provisioned AV
E . The site is under DDOS attack

Answer: D

Which monitor type and parameters arc required?

An LTM device load balances a pool of routers. The LTM device needs to verify path availability to an HTTP server with the IP address 192 168.10 10. located beyond the routers.

Which monitor type and parameters arc required?
A . HTTP monitor alias address 192 168.10 10. and set the alias to port 80
B . TCP monitor, alias address 192.168.10.10. and set the alias to port 80
C . TCP monitor change transparent option to Yes. set alias address 192.168.10.10. and set the alias to port 80
D . TCP monitor, change transparent option to Yes, and sot the alias to port 80

Answer: C

Which step should the LTM Specialist take to meet this requirement?

An LTM Specialist regularly provides analytics reports that show that traffic generated by different subnets within the organization. The LTM Specialist needs show the associate department names next the IP addresses in the reports.

Which step should the LTM Specialist take to meet this requirement?
A . use an iRule to change the output of the report
B . export the report and add the department names manually
C . create VLANs for each subnet and set the name accordingly
D . define active subnets and assign a name to certain subnets

Answer: C

Based on the output below, which configuration change should be made to ensure the LTM module receives the most amount of resources?

An LTM Specialist has recently taken over administration or an LTM device that has experienced resource availability issues. The LTM device will need to be solely used for load balancing and SSL offload. Previously, the LTM device was also used to provide statistical analysis of application traffic. However, that functionality has been moved to a third party solution.

Based on the output below, which configuration change should be made to ensure the LTM module receives the most amount of resources?

A . Provision AVR to Minimum. Provision LTM at Maximum
B . Provision AVR to none. Provision LTM to Dedicated
C . Provision AVR to Minimum, Provision LTM to Dedicated
D . Provision LTM to Dedicated, Provision AVR to Dedicated

Answer: B

Which persistence profile enables the iRule to meet these requirements?

An LTM Specialist needs to create an iRule that creates persistence records based on a

JSESSIONID cookie. If a persistence record already exists, then the iRule must persist the client connection according to the existing record.

Which persistence profile enables the iRule to meet these requirements?
A . Universal
B . SSL
C . Destination Address Affinity
D . Cookie
E . Source Address Affinity

Answer: A

Which load balancing method should an LTM Specialist apply to divided the web application traffic to the servers on the relative performance trend?

Six servers have a varying number of connections that change based on the user load.

Which load balancing method should an LTM Specialist apply to divided the web application traffic to the servers on the relative performance trend?
A . Least Sessions
B . Least Connections
C . Predictive
D . Ratio

Answer: C

Which settings should the LTM Specialist configure in the client SSL profile?

An TLM Specialist needs to configure a virtual server to terminate SSL connection on the LTM device.

Cryptographic information must be re-authorized for SSL sessions that remain open for longer than 30 seconds.

Which settings should the LTM Specialist configure in the client SSL profile?
A . set the Handshake Timeout to 30 seconds
B . enable Require Peer SN1 Support
C . set the Renegotiate Period to 30 seconds
D . set the Renegotiate Max Record Delay to 30

Answer: C

What should be added to increase the performance of the device?

An LI M device is experiencing a high volume of traffic. The virtual server is struggling under the load. The problem appears to be on the server side connections. The virtual server is accepting connections . The virtual server is accepting connections on https and is configured with an SSL profile and http pool.

What should be added to increase the performance of the device?
A . an HTTP Compression profile
B . a One Connect profile
C . smaller key to the SSL profile
D . a SPDY profile

Answer: B