A storage administrator wants to configure a Unity system to log system events to a remote log server. In order to allow access to the log server, which port should the administrator ensure is not blocked by the firewall?

A storage administrator wants to configure a Unity system to log system events to a remote log server. In order to allow access to the log server, which port should the administrator ensure is not blocked by the firewall?A . 514B . 714C . 1000D . 5179View AnswerAnswer: A Explanation:...

August 7, 2021 No Comments READ MORE +

What is the maximum number of LUN snapshots that are supported by Unity?

What is the maximum number of LUN snapshots that are supported by Unity?A . 16B . 96C . 256D . 512View AnswerAnswer: C Explanation: Note: Logical Unit Number (LUN) C A block-level storage device that can be accessed using a protocol such as iSCSI.

August 7, 2021 No Comments READ MORE +

Which Unity feature provides a high bandwidth connection for large file transfers, enables proactive Service Request generation and usage license reporting, and operates on a 24x7 basis?

Which Unity feature provides a high bandwidth connection for large file transfers, enables proactive Service Request generation and usage license reporting, and operates on a 24x7 basis?A . EMC Service CenterB . Software Licensing CentralC . Unisphere CentralD . EMC Secure Remote ServicesView AnswerAnswer: D Explanation: Benefit from secure, high-speed,...

August 7, 2021 No Comments READ MORE +

Which file extension is used for Unity license files?

A system administrator is browsing their local management station for a Unity license file. Which file extension is used for Unity license files?A . .licB . .rsaC . .linD . .cerView AnswerAnswer: A Explanation: You need to obtain the license file (.lic) from the EMC license management web site. References:...

August 7, 2021 No Comments READ MORE +

To meet the administrator's requirement without over provisioning the capacity, which Unity Hybrid storage array is recommended?

A storage administrator has requested a recommendation on upgrading their VNX5600 to a comparable Unity storage array. The solution requires a maximum capacity of 3.5 PB. To meet the administrator's requirement without over provisioning the capacity, which Unity Hybrid storage array is recommended?A . Unity 300B . Unity 400C ....

August 7, 2021 No Comments READ MORE +

Through which protocols are backend storage provisioned to the ESXi host when deploying a UnityVSA system?

Through which protocols are backend storage provisioned to the ESXi host when deploying a UnityVSA system?A . iSCSI, SMB, and NFSB . iSCSI and NFS onlyC . FC, iSCSI, and NFSD . FC and iSCSI onlyView AnswerAnswer: C Explanation: UnityVSA supports SMB, NFS, and iSCSI. References: https://www.emc.com/collateral/TechnicalDocument/docu69362.pdf (page 4)

August 7, 2021 No Comments READ MORE +

What should be checked on the host that may be preventing the utility from discovering any Unity storage systems?

A system administrator has installed the Unity Connection Utility on a Microsoft Windows host. The Windows host is connected to the same physical subnet as a newly installed Unity storage system. When the utility is run, it does not discover any Unity storage systems. What should be checked on the...

August 7, 2021 No Comments READ MORE +

What is the correct sequence of steps taken by the storage array when an AC power failure is detected?

DRAG DROP What is the correct sequence of steps taken by the storage array when an AC power failure is detected? View AnswerAnswer:

August 6, 2021 No Comments READ MORE +

Which Fibre Channel port on each SP must be used for native synchronous replication?

An administrator’s Unity system is configured with both a Fibre Channel CNA and a Fibre Channel I/O module. Which Fibre Channel port on each SP must be used for native synchronous replication?A . CNA FC port 5B . I/O module FC port 2C . CNA FC port 4D . I/O...

August 6, 2021 No Comments READ MORE +

What is the minimum and maximum recovery point objectives (RPO) configurable when using Unity native asynchronous replication?

What is the minimum and maximum recovery point objectives (RPO) configurable when using Unity native asynchronous replication?A . Minimum= 5 minutes Maximum= 24 hoursB . Minimum= 5 minutes Maximum= 48 hoursC . Minimum= 1 minute Maximum= 24 hoursD . Minimum= 1 minute Maximum= 48 hoursView AnswerAnswer: A Explanation: Recovery Point...

August 6, 2021 No Comments READ MORE +