JN0-1361 Online Training Archives

Select Exam4Training is to choose success. Exam4Training Juniper JN0-1361 Service Provider Design, Specialist (JNCDS-SP) Online Training can help all candidates to pass the Juniper JN0-1361 certification exam. Through the use of a lot of candidates, Exam4Training JNCDS-SP JN0-1361 exam is a great response around candidates, and to establish a good reputation. This is turn out that select Exam4Training Juniper JN0-1361 Service Provider Design, Specialist (JNCDS-SP) Online Training is to choose success.

Page 1 of 2

1. Exhibit.

You work for service provider B that wants to implement a hot potato routing policy on the network so that router C uses link C-A to reach service provider A's advertised routes and router D uses link D-B to reach Service Provider A's advertised routes Currently traffic from router C is traversing the core to exit the network on router B.

Referring to the exhibit, what are two design actions that would satisfy the requirements? (Choose two.)

Implement BGP-ORR

Configure new IBGP neighbors between routers C and A and routers D and B

Implement BGP-LS

Configure the route reflector to send multiple copies of a route learned from different IBGP peers to its clients.

2. Your customer is paying for traffic prioritization and you must ensure that all traffic from their 172.27. 10.0/24 network receives top priority through your network.

Which action will satisfy this requirement?

Apply a behavior aggregate classifier to the egress interface.

Apply a custom rewrite rule to the ingress interface.

Apply a multifield classifier to the ingress interfaces.

Apply a custom scheduler map to the ingress interface.

3. You are designing a service provider core network As part of the design, you must ensure that the MPLS network utilizes the traffic engineering database (TED) for path selection and resiliency. You have chosen OSPF as the IGP for your design.

In this scenario which statement is correct?

You must enable traffic engineering in OSPF to populate the TE

OSPF cannot be used to populate the TE

You must disable traffic engineering in OSPF to use the TE

OSPF populates the TED by default.

4. Your company is designing a new data center in a remote location that must be connected to your local data center. You have a service provider connection between the CE devices at each site. You want to implement EVPN with VXLAN services between sites, but the service provider does not offer EVPN services.

Which two statements are true in this scenario? (Choose two )

The provider's edge devices must map your VXLAN VNIs to MPLS LSPs within the provider network at each site

The customer's edge devices within your data center can act as VXLAN Layer 2 gateways

You can still implement EVPN service across the service provider as long as there is IP reachability between the sites.

The service provider must provide an MPLS-based VPN connection between sites

5. Your WAN links are on a VPLS service from a single service provider. You must verify device configuration power and status in the event of a service outage.

Which two actions provide out-of-band management to your edge routers? (Choose two)

Place management traffic on a separate VLAN on the VPLS service

Connect each Ethernet management interface to a dedicated switch with traffic routed on its own subnet on the VPLS service

Connect each Ethernet management interface to a dedicated switch with its own WAN connection.

Connect each serial management port to a console server with a cellular Internet connection

6. Exhibit.

Which routing protocol design will accomplish these goals?

Enable a full mesh of IBGP sessions between the routers in ISP

Redistribute the BGP routes learned from ISP A into the OSPF instance running in ISP

Configure static routes to ISP A on each router within ISP

Configure each router in ISP B to peer with a par of route reflectors.

7. Your applications are migrating from a legacy data center to an EVPN over a VXLAN-based VM environment. A few critical legacy applications not support this environment and must remain on bare metal servers and the applications must be able to access the Internet.

What must be included in the VXLAN design to satisfy these requirements?

VTEP tunneling

VXLAN gateway

SR-IOV

nested VM capability

8. Which security implementation does Juniper Networks recommend for all core routers in a service provider network?

intrusion and detection prevention

unified threat management

application firewall

stateless loopback firewall filter

9. What are three components of a class-of-service scheduler? (Choose three.)

transmit rate

forwarding class

queue priority

delay buffer size

policing rate

10. You are designing a multi-site data center environment with data center interconnects between sites.

Which two statements are true in this scenario? (Choose two. )

VPLS can be used to interconnect the multiple sites.

EVPN with VXLAN can be used to interconnect the multiple sites.

The data centers must be connected with a full mesh design.

All data centers must be in the same Layer 2 broadcast domain and subnet.

Page 2 of 2

11. Exhibit.

You are asked to ensure that most traffic that traverses your network is load balanced over all of the equal cost links between the routers in your network. However, you must also ensure that traffic from ISP A that is destined for ISP D must traverse the R1-R2-R3-R4-R5 path.

Referring to the exhibit how would you accomplish this task?

Force the ISP A to ISP D traffic over RSVP-signaled LSPs.

Adjust the BGFs LOCAL PREF attribute to ensure that the raw IP packets follow the required path.

Adjust the OSPF metrics of each link so that the raw IP packets follow the required path.

Force the ISP A to ISP D traffic over LDP-signaled LSPs.

12. Which two statements about BFD are correct? (Choose two)

BFD provides link failure detection for static routes.

BFD modifies each protocol timer to improve link failure detection.

NSR maintains BFD sessions during Routing Engine switchover.

GRES is required for BFD sessions to be established.

13. Your customer's WAN edge connects to two service providers SP-A and SP-B. The customer is advertising a single /22 subnet to both service providers through EBGP peering sessions. The customer wants to influence inbound traffic to the advertised /22 destination prefix so that it passes through SP-A when both paths are operational.

Which action meets the customer's requirement?

Advertise the prefix to SP-A with a lower MED value than that sent to SP-

Advertise the prefix to SP-B with an origin of unknown.

Advertise the prefix to SP-B with a lower MED value than that sent to SP-

Advertise the prefix to SP-A with an origin of unknown.

14. Your customer's enterprise is adding geographically-dispersed branch offices and requires new WAN connections. The primary design consideration for this expansion is low cost but the branches must remain secure with low latency.

Which type of Internet access model satisfies the customer's requirement in this scenario?

distributed model with security at the hub

centralized model with security at the hub

centralized model with security at each branch

distributed model with security at each branch

15. Which Juniper Networks platform automates the orchestration of compute, storage, and networking resources to create and manipulate OpenStack clouds?

NorthStar

Contrail

WANDL

RingMaster