Network administrators manage ArubaOS switches through the CU. What is one prerequisite to enable transfers of completely encrypted config files? A . Enable the include-credentials option . B . Install a CA-signed certificate on the switch. C . Enable TFTP E . Set up SS
A network administrator wants to form a cluster with several Aruba Instant APs (IAPs). What must the administrator verify? A . that all APs are pre-configured with WLANs with the same SSID B . that all APs are operating on the same radio channel C . that all APs are the same model D . that all APs are connected in the same subnet
A network administrator connects several newAruba Instant APs (at factory defaults) to a switch. After waiting several minutes for the cluster to form, the administrator is ready to provision the cluster. The VLAN on the ports connected to the APs has no DHCP services. A . How can the administrator contact the Instant UI and provision the APs with static IP addresses? B . Connect to the Instant SSID and open a Web browser. C . Access the default IP address, 192.168.1.1, from a device connected in the AP VLA E . Access the cluster using Aruba Activate. F . Access https://vc.arubanetworks.com from a device connected in the AP VLA
A company has a cluster of Aruba Instant APs (IAPs). The company wants to add a new IAP to the cluster.
What should network administrators ensure before they connect the new IAP? A . that the DHCP server has the correct options 60 and 43 B . that the new IAP has been provisioned with an IP address and the IP address of the cluster virtual controller (VC) C . that Aruba Activate is configured with provisioning rules for the IAP D . that the switch port for the AP is untagged for the same VLAN as the current cluster
Which settings are required on ArubaOS switches for Aruba AirWave to discover monitor, and manage them? A . shared cluster key and an SNMP v2 community or v3 user B . SNMP v2 community or v3 user and an HTTPS certificate C . credentials for Telnet or SSH login and an SNMP v2 community or v3 user D . credentials for Telnet or SSH login and an HTTPS certificate
A network has ArubaOS switches and an Aruba Instant cluster with IP addresses on 10.1.255.0/24. The network administrator wants to manage the devices in Aruba Airwave. The administrator uses the SNMP credentials configured on the switches to create a scan set for 10.1.255.0/24. The scan discovers the switches but not the Instant cluster.
What should the administrator do to discover the cluster in Airwave? A . Configure SNMP credentials in the Instant U C . Re-configure the scan set to use the Aruba Instant default SNMPv3 user, admin. D . Specify the AirWave IP address in the Instant UI System> Admin settings. E . Install the Instant cluster self-signed certificate on Airwave.
A broadcast packet arrives tagged for VLAN 2 on the Member 2 link of Trk2.
What does Member 2 do? A . It forwards the packet over the VSF link to Member 1. and then Member 1 forwards the packet on its link in Trk1. B . It uses LACP to communicate with the commander on the VSF link, and then follows the commander directions. C . It uses a hash to select one of the links in Trk1, and then forwards the packet locally or on the VSF link, based on the decision. D . It forwards the packet on its local link in Trk1.
Which type of link aggregation should the network administrator configure on interfaces 1/A1 and 2/A1? A . a protocol-less trunk B . an LACP distributed trunk C . a distributed trunk D . a static LACP link aggregation
Which devices must support Multi-User Multiple Input Multiple Output (ML) MIMO) in order for an AP to transmit to multiple clients simultaneously? A . all of the APs in a WLAN, but none of the clients B . the transmitting AP and at least one of the clients that receives simultaneous transmissions C . the transmitting AP and all of the clients D . the transmitting AP and all of the clients that receive simultaneous transmissions