HPE0-S57 Online Training Archives

Exam4Training is the best webpage forgiving on the web preparing material to HP HPE0-S57 exam. You can find related HP HPE0-S57 Designing HPE Hybrid IT Solutions Online Training on Exam4Training that will help you with clearing your HPE ASE HPE0-S57 exam on the vital undertaking.Exam4Training is the best source where you can get all the available online exam material. You can without quite a bit of a stretch get HP HPE0-S57 Designing HPE Hybrid IT Solutions Online Training and can pass your HPE0-S57 Designing HPE Hybrid IT Solutions exam with comfort.

Page 1 of 4

1. A customer is a cloud provider who needs a new storage array. They want a solution that has built-in multi-tenancy features.

Why should you propose HPE 3PAR StoreServ to the customer?

It divides controller nodes into groups for multiple tenants.

It includes the virtual domains feature as part of all-inclusive licensing.

It divides drives into separate pools for multiple tenants.

It includes the NPARs feature for physical separation of the array into tenant areas.

2. A customer is looking for a new platform to support their AI research projects.

Which technology should you recommend?

Peer Persistence

Multi-core GPUs

Availability clustering

Persistent memory

3. A customer is looking to virtualize desktops and application access to provide better business continuance and disaster recovery. They also need simplified deployment and the ability to scale out in the feature.

Which HPE platform should you recommend?

Edgeline

ProLiant DL

Superdome Flex

SimpliVity

4. What must be taken into account when using the HPE FlexFabric 5945 4-slot Switch as a ToR switch in a solution?

adding in a Network Analytics Engine license

specifying a fan tray with the appropriate direction of airflow

adding in an Intelligent Resilient Framework license

selecting power supplies with adequate reserve PoE+ capacity

5. A customer wants to implement a container platform across their enterprise data center. They need to automate hardware and software configurations to quickly provision and deploy at scale.

Which authentication solution should you recommend?

Red Hat Ansible Tower

OpenStack on OpenStack

Chef

DevStack

6. A customer is purchasing a full rack of DL380 Gen10 servers. They are under a severe time constraint and would like the servers to be ready to receive applications upon power up.

What should be recommended to satisfy this requirement?

Use HPE Proactive Care services.

Use HP Pointnext service patching and OS installation services.

Include a Customer Intent Document with the order, requesting OS installation services.

Nothing additional: all servers arrive from the factory ready for application deployment.

7. A customer contacts you for assistance with an expansion of their current HPE Synergy environment.

The existing environment contains:

- one Synergy 12000 frame

- two Composers

- eight SY480 Compute Modules - 1 CPU - 384GB RAM - 3820C 10/20GbE CNA

- one D3940 Storage Module

The new requirement is 16Gb FC connectivity to a newly-deployed 3PAR storage array.

Which components should you include? (Choose two.)

Synergy 3830C Host Bus Adapter

two QSFP+ AOC/DAC cables for ICM clustering

a second CPU per Compute Module

HPE Synergy FC License Upgrade per Composer pair

an additional Virtual Connect SE 40Gb F8

8. A customer running multiple HPE Synergy frames wants to change a parameter in the BIOS of all their VMware servers, based on the recommendations of their VMware team.

Where is the most efficient location to make this change?

iLO Federation

Server Profile Template

Logical Enclosure

ROM Based Setup Utility (RBSU)

9. DRAG DROP You proposed a Nimble AF60 solution with 8x 10GbaseT ports to a customer. The raw capacity is 167 TiB. The customer’s growth expectations have changed, and they now request a solution that supports 334 TiB of raw storage instead.

Which benefit is gained by each proposed solution? (Choose all that apply.)

10. A customer asks you about the features of the HPE SimpliVity, such as performance, availability, efficiency, and protection.

Which statement is correct about an HPE SimpliVity solution that enables these features?

The OmniStack Accelerator Card (OAC) contains a FPGA programmed with HPE SimpliVity deduplication, compression, and optimization algorithms.

The OmniStack Accelerator Card (OAC) connects directly to the iSCSI VIP address enabled by the OV

The OmniStack Accelerator Card (OAC) has direct hardware access to the two PCIe cards through VM direct path I

The OmniStack Virtual Controller (OVC) creates an iSCSI datastore where the hypervisor stores the workload VMs.

Page 2 of 4

11. In preparation for a customer presentation, you need to provide meaningful estimates of cooling requirements for HPE ProLiant, HPE Apollo, and HPE Synergy servers.

What should you use?

HPE Synergy Planning Tool

HPE Proposal Web

HPE Server Memory Configurator

HPE Power Advisor

12. A customer requires front panel access for their Gen10 servers.

What is required to meet this need?

a USB 2.0 Ethernet adapter

an installed iLo Advance license

Secure Boot enabled

Two-factor authentication enabled

13. You are designing a highly-available SQL database solution, following HPE reference architectures for Microsoft SQL 2017 on Linux.

Which HA design factors should be considered? (Choose two.)

Real-Time Operational Analytics

Transparent Data Encryption

Always On Failover Cluster Instance (FCI)

Read-Scale Availability Groups

14. A customer is looking for a switch virtualization feature that can help them simplify the management of their HPE FlexFabric switches.

Which technology should you recommend?

VSF

MSTP

VXLAN

IRF

15. A customer is asking for the latest version of the HPE Nimble Storage Integration Guide.

Where can the customer download the guide?

HPE SPOCK

HPE Product Bulletin

HPE InfoSight

HPE Information Library

16. A customer is interested in a Synergy solution. They need 100 compute modules and expect the workload to double in two years.

They ask for the minimum number of management ports they will need to connect Synergy frames into their management network.

How should you reply?

FLMs from all frames connect into a management ring, and the management ring connects into their management network with two uplinks.

FLMs from all frames connect to two external switches, and these two switches connect into their management network.

Synergy solution only allows 15 frames to be interconnected, so growth in customer’s workload is not supported.

The RJ-45 ports on the front of each frame are connected to an external switch, which is connected into their management network.

17. You are designing a network topology for a customer. The customer is looking for a large-scale Layer 2 fabric, with redundant links and load balancing, while avoiding traditional STP, RSTP, and MSTP protocols.

Which switch will support these features with industry standard technology?

HPE FlexFabric 5980

HPE FlexFabric 12902E

Aruba 8325

HPE FlexFabric 5710

18. You propose an HPE 3PAR StoreServ 8200 array for a customer who needs 900 TiB raw storage space. After the proposal was created, the customer went through with a competitor acquisition. Now they need to accommodate 1600 TiB.

What should you propose to the customer?

Instead of 3PAR StoreServ 8200 2-node configuration, propose an 8400 4-node configuration with the needed amount of drives.

Instead of 3PAR StoreServ 8200 2-node configuration, propose an 8400 2-node configuration with a 2node upgrade and the needed amount of drives.

Upgrade the 3PAR StoreServ 8200 2-node configuration with four additional nodes and the needed amount of drives.

Upgrade the 3PAR StoreServ 8200 2-node configuration with Data Optimization Software Suite and the needed amount of drives.

19. In preparation for a customer presentation, you need to create a validated configuration, including services.

Which tool should you use?

HPE One Configuration Advanced

HPE Power Advisor

HPE Server Memory Configurator

HPE Synergy Planning Tool

HPE Proposal Web

20. DRAG DROP

Match each item to its function. (Choose all that apply.)

Page 3 of 4

21. A customer has the following design requirements:

- Support for 16Gb Fibre Channel

- All SAN elements must be managed by the SAN team

- All SAN elements need to be managed by the existing tools

Which component must be included in the design to meet the customer’s requirements?

HPE Virtual Connect SE 16Gb FC Module for HPE Synergy

HPE Virtual Connect SE 40Gb FC Module for HPE Synergy

HPE Synergy 8Gb FC License Upgrade

Brocade 16Gb Fibre Channel SAN Switch Module for HPE Synergy

22. While discussing data reduction technologies, a customer is concerned their data may not compress or deduplicate well.

Which tools should you use to read actual customer data and assess the amount of data reduction savings they may achieve? (Choose two.)

NinjaCrawler

Nimble Space Savings Estimator

NinjaSTARS for Nimble

NinjaSTARS

23. DRAG DROP

Match the HPE Service to the service it provides. (Choose all that apply.)

24. A customer needs a VMware Horizon VDI solution with accelerated GPU support. They need the highest density GPU solution available.

Which solution should you recommend?

HPE WS460c Gen9 Graphics Server Blade with graphics expansion

HPE Apollo r2600 with RCM Module

HPE Synergy SY 480 with multi-MXM expansion module

HPE DL360 Gen10 with primary GPU riser

25. Which industry standard protocol is typically used to communicate with remote resources on mobile applications?

NFS

HTTP

STP

TRILL

26. A customer is looking to replace their aging data center networking infrastructure with an agile, software-defined solution that will enable them to ensure that their mission-critical applications can always get the bandwidth they need.

Which HPE solution should you recommend?

StoreFabric

Image Streamer

OfficeConnect

Composable Fabric Manager

27. The customer has an HPE Nimble HF40.

The customer’s application needs have changed, and they now require more performance from their current storage solution.

What should you do to address the customer’s new requirements?

Grow the FDR (flash-to-disk) ration by adding SSDs to the Dual Flash Carries (DFC).

Enable the HPE Advanced Data Services license to enable tiering.

Upgrade the existing controller pair with a higher model number.

Add disks and SSDs to the current array.

28. A customer wants to expand their existing 3PAR array additional drives. The array is sending remote support data, but is not configured in HPE InfoSight.

Which tool should you use to examine the current configuration of the array to make balanced drive expansion recommendations to your customer?

HPE NinjaSTARS

HPE Storage Sizer

HPE 3PAR STaTs

HPE 3PAR SSMC

29. A customer needs a right-mix strategy and roadmap for hybrid-IT delivery that covers platform, operations, and brokering.

Which HPE service should be recommended to meet the customer’s requirements?

Professional Services

Advisory & Transformation Services

Operational Services

Proactive Services

30. A customer wants to know why their servers should be configured in UEFI mode instead of legacy boot mode.

What does UEFI in Gen10 support? (Choose two.)

FTP boot as a PXE alternative

Internet Small Computer Systems Interface (iSCSI) Software Initiator support

Trusted Platform Module (TPM) 1.0

Non-Volatile Memory Express (NVMe) boot

USB 3.1 support

Page 4 of 4

31. A customer is building a new Hybrid Infrastructure data center to support private, public, and hybrid cloud workloads. The customer needs to be able to optimize the performance of East-West network traffic.

Which technology should you recommend?

Access/Aggregation/Core

Leaf/Spine

VXLAN/NVGRE

STP/RSTP

32. A customer is running a virtualized application with the data stored on their server’s local storage. As the storage space is getting full, they are looking into a new storage system. Their IT generalist would like to use a single management interface for the new solution.

Which solution should you recommend to the customer?

HPE Nimble HF20

HPE MSA 2052

HPE SimpliVity 380

HPE 3PAR StoreServ 8400

33. After meeting with a customer and gathering basic capacity and performance metrics, you are ready to recommend an HPE 3PAR storage solution.

Which HPE sizing tool should be used to architect the solution, create a ready-to-order bill of materials, and present the customer with a graphic representation of the solution being proposed?

HPE Storage Sizer Tool

HPE NinjaSTARS

HPE InfoSight

HPE 3PAR STaTs

34. DRAG DROP

Match the appropriate server, storage, or networking platform to the workload. (Choose all that apply.)

35. An administrator needs to report the write response time of an existing 3PAR StoreServ.

Which HPE tool should be used to respond to the need?

SAF Analyze

NinjaCrawler

SAF Collect

NinjaStars