CSSLP exam

You work as a systems engineer for BlueWell Inc.

Which of the following tools will you use to look outside your own organization to examine how others achieve their performance levels, and what processes they use to reach those levels?
A . Benchmarking
B . Six Sigma
C . ISO 9001:2000
D . SEI-CMM

View Answer

Answer: A

Explanation:

Benchmarking is the tool used by system assessment process to provide a point of reference by which performance measurements can be reviewed with respect to other organizations. Benchmarking is also recognized as Best Practice Benchmarking or Process Benchmarking. It is a process used in management and mostly useful for strategic management. It is the process of comparing the business processes and performance metrics including cost, cycle time, productivity, or quality to another that is widely considered to be an industry standard benchmark or best practice. It allows organizations to develop plans on how to implement best practice with the aim of increasing some aspect of performance. Benchmarking might be a one-time event, although it is frequently treated as a continual process in which organizations continually seek out to challenge their practices. It allows organizations to develop plans on how to make improvements or adapt specific best practices, usually with the aim of increasing some aspect of performance.

ANS: C is incorrect. The ISO 9001:2000 standard combines the three standards 9001, 9002, and 9003 into one, called 9001. Design and development procedures are required only if a company does in fact engage in the creation of new products. The 2000 version sought to make a radical change in thinking by actually placing the concept of process management front and center ("Process management" was the monitoring and optimizing of a company’s tasks and activities, instead of just inspecting the final product). The ISO 9001:2000 version also demands involvement by upper executives, in order to integrate quality into the business system and avoid delegation of quality functions to junior administrators. Another goal is to improve effectiveness via process performance metrics numerical measurement of the effectiveness of tasks and activities. Expectations of continual process improvement

and tracking customer satisfaction were made explicit.

ANS: B is incorrect. Six Sigma is a business management strategy, initially implemented by Motorola. As of 2009 it enjoys widespread application in many sectors of industry, although its application is not without controversy. Six Sigma seeks to improve the quality of process outputs by identifying and removing the causes of defects and variability in manufacturing and business processes. It uses a set of quality management methods, including statistical methods, and creates a special infrastructure of people within the organization ("Black Belts", "Green Belts", etc.) who are experts in these methods. Each Six Sigma project carried out within an organization follows a defined sequence of steps and has quantified financial targets (cost reduction or profit increase). The often used Six Sigma symbol is as follows:

ANS: D is incorrect. Capability Maturity Model Integration (CMMI) was created by Software Engineering Institute (SEI). CMMI in software engineering and organizational development is a process improvement approach that provides organizations with the essential elements for effective process improvement. It can be used to guide process improvement across a project, a division, or an entire organization. CMMI can help integrate traditionally separate organizational functions, set process improvement goals and priorities, provide guidance for quality processes, and provide a point of reference for appraising current processes. CMMI is now the de facto standard for measuring the maturity of any process. Organizations can be assessed against the CMMI model using Standard CMMI Appraisal Method for Process Improvement (SCAMPI).

Which of the following is a variant with regard to Configuration Management?
A . A CI that has the same name as another CI but shares no relationship.
B . A CI that particularly refers to a software version.
C . A CI that has the same essential functionality as another CI but a bit different in some small manner.
D . A CI that particularly refers to a hardware specification.

View Answer

Answer: C

Explanation:

A CI that has the same essential functionality as another CI but a bit different in some small manner, and therefore, might be required to be analyzed along with its generic group. A Configuration item (CI) is an IT asset or a combination of IT assets that may depend and have relationships with other IT processes. A CI will have attributes which may be hierarchical and relationships that will be assigned by the configuration manager in the CM database. The Configuration Item (CI) attributes are as follows:

Which of the following models uses a directed graph to specify the rights that a subject can transfer to an object or that a subject can take from another subject?
A . Take-Grant Protection Model
B . Biba Integrity Model
C . Bell-LaPadula Model
D . Access Matrix

View Answer

Answer: A

Explanation:

The take-grant protection model is a formal model used in the field of computer security to establish or disprove the safety of a given computer system that follows specific rules. It shows that for specific systems the question of safety is decidable in linear time, which is in general undecidable. The model represents a system as directed graph, where vertices are either subjects or objects. The edges between them are labeled and the label indicates the rights that the source of the edge has over the destination. Two rights occur in every instance of the model: take and grant. They play a special role in the graph rewriting rules describing admissible changes of the graph.

ANS: D is incorrect. The access matrix is a straightforward approach that provides access rights to subjects for objects.

ANS: C is incorrect. The Bell-LaPadula model deals only with the confidentiality of classified material. It does not address integrity or availability.

ANS: B is incorrect. The integrity model was developed as an analog to the Bell-LaPadula confidentiality model and then became more sophisticated to address additional integrity requirements.

Which of the following are the types of access controls? Each correct answer represents a complete solution. Choose three.
A . Physical
B . Technical
C . Administrative
D . Automatic

View Answer

Answer: ABC

Explanation:

Security guards, locks on the gates, and alarms come under physical access control. Policies and procedures implemented by an organization come under administrative access control. IDS systems, encryption, network segmentation, and antivirus controls come under technical access control.

ANS: D is incorrect. There is no such type of access control as automatic control.

Which of the following attacks causes software to fail and prevents the intended users from accessing software?
A . Enabling attack
B . Reconnaissance attack
C . Sabotage attack
D . Disclosure attack

View Answer

Answer: C

Explanation:

A sabotage attack is an attack that causes software to fail. It also prevents the intended users from accessing software. A sabotage attack is referred to as a denial of service (DoS) or compromise of availability.

ANS: B is incorrect. The reconnaissance attack enables an attacker to collect information about software and operating environment.

ANS: D is incorrect. The disclosure attack exposes the revealed data to an attacker.

ANS: A is incorrect. The enabling attack delivers an easy path for other attacks.

DRAG DROP

Drop the appropriate value to complete the formula.

View Answer

Answer:

Explanation:

A Single Loss Expectancy (SLE) is the value in dollar ($) that is assigned to a single event. The SLE can be calculated by the following formula: SLE = Asset Value ($) X Exposure Factor (EF) The Exposure Factor (EF) represents the % of assets loss caused by a threat. The EF is required to calculate the Single Loss Expectancy (SLE). The Annualized Loss Expectancy (ALE) can be calculated by multiplying the Single Loss Expectancy (SLE) with the Annualized Rate of Occurrence (ARO). Annualized Loss Expectancy (ALE) = Single Loss Expectancy (SLE) X Annualized Rate of Occurrence (ARO) Annualized Rate of Occurrence (ARO) is a number that represents the estimated frequency in which a threat is expected to occur. It is calculated based upon the probability of the event occurring and the number of employees that could make that event occur.

Which of the following are the common roles with regard to data in an information classification program? Each correct answer represents a complete solution. Choose all that apply.
A . Editor
B . Custodian
C . Owner
D . User
E . Security auditor

View Answer

Answer: BCDE

Explanation:

The following are the common roles with regard to data in an information classification

program: Owner Custodian User Security auditor The following are the responsibilities of the owner with regard to data in an information classification program: Determining what level of classification the information requires. Reviewing the classification assignments at regular time intervals and making changes as the business needs change. Delegating the responsibility of the data protection duties to the custodian. The following are the responsibilities of the custodian with regard to data in an information classification program: Running regular backups and routinely testing the validity of the backup data Performing data restoration from the backups when necessary Controlling access, adding and removing privileges for individual users The users must comply with the requirements laid out in policies and procedures. They must also exercise due care. A security auditor examines an organization’s security procedures and mechanisms.

Certification and Accreditation (C&A or CnA) is a process for implementing information security. It is a systematic procedure for evaluating, describing, testing, and authorizing systems prior to or after a system is in operation.

Which of the following statements are true about Certification and Accreditation? Each correct answer represents a complete solution. Choose two.
A . Certification is a comprehensive assessment of the management, operational, and technical security controls in an information system.
B . Accreditation is a comprehensive assessment of the management, operational, and technical security controls in an information system.
C . Accreditation is the official management decision given by a senior agency official to authorize operation of an information system.
D . Certification is the official management decision given by a senior agency official to authorize operation of an information system.

View Answer

Answer: AC

Explanation:

Certification and Accreditation (C&A or CnA) is a process for implementing information security. It is a systematic procedure for evaluating, describing, testing, and authorizing systems prior to or after a system is in operation. The C&A process is used extensively in the U.S. Federal Government. Some C&A processes include FISMA, NIACAP, DIACAP, and DCID 6/3. Certification is a comprehensive assessment of the management, operational, and technical security controls in an information system, made in support of security accreditation, to determine the extent to which the controls are implemented correctly, operating as intended, and producing the desired outcome with respect to meeting the security requirements for the system. Accreditation is the official management decision given by a senior agency official to authorize operation of an information system and to explicitly accept the risk to agency operations (including mission, functions, image, or reputation), agency assets, or individuals, based on the implementation of an agreed-upon set of security controls.

Adam works as a Computer Hacking Forensic Investigator for a garment company in the United States. A project has been assigned to him to investigate a case of a disloyal employee who is suspected of stealing design of the garments, which belongs to the company and selling those garments of the same design under different brand name. Adam investigated that the company does not have any policy related to the copy of design of the garments. He also investigated that the trademark under which the employee is selling the garments is almost identical to the original trademark of the company.

On the grounds of which of the following laws can the employee be prosecuted?
A . Espionage law
B . Trademark law
C . Cyber law
D . Copyright law

View Answer

Answer: B

Explanation:

The Trademark law is a piece of legislation that contains the federal statutes of trademark law in the United States. The Act prohibits a number of activities, including trademark infringement, trademark dilution, and false advertising. Trademarks were traditionally protected in the United States only under State common law, growing out of the tort of unfair competition. Trademark law in the United States is almost entirely enforced through private lawsuits. The exception is in the case of criminal counterfeiting of goods. Otherwise, the responsibility is entirely on the mark owner to file suit in either state or federal civil court in order to restrict an infringing use. Failure to "police" a mark by stopping infringing uses can result in the loss of protection.

ANS: D is incorrect. Copyright law of the United States governs the legally enforceable rights of creative and artistic works under the laws of the United States. Copyright law in the United States is part of federal law, and is authorized by the U.S. Constitution. The power to enact copyright law is granted in Article I, Section 8, Clause 8, also known as the Copyright Clause. This clause forms the basis for U.S. copyright law ("Science", "Authors", "Writings") and patent law ("useful Arts", "Inventors", "Discoveries"), and includes the limited terms (or durations) allowed for copyrights and patents ("limited Times"), as well as the items they may protect. In the U.S., registrations of claims of copyright, recordation of copyright transfers, and other administrative aspects of copyright are the responsibility of the United States Copyright Office, a part of the Library of Congress.

ANS: A is incorrect. The Espionage Act of 1917 was a United States federal law passed shortly after entering World War I, on June 15, 1917, which made it a crime for a person: To convey information with intent to interfere with the operation or success of the armed forces of the United States or to promote the success of its enemies. This was punishable by death or by imprisonment for not more than 30 years. To convey false reports or false statements with intent to interfere with the operation or success of the military or naval forces of the United States or to promote the success of its enemies and whoever when the United States is at war, to cause or attempt to cause insubordination, disloyalty, mutiny, refusal of duty, in the military or naval forces of the United States, or to willfully obstruct the recruiting or enlistment service of the United States.

ANS: C is incorrect. Cyber law is a very wide term, which wraps up the legal issue related to the use of communicative, transactional and distributive aspect of networked information device and technologies. It is commonly known as INTERNET LAW. These Laws are important to apply as Internet does not tend to make any geographical and jurisdictional boundaries clear; this is the reason why Cyber law is not very efficient.

A single transaction may involve the laws of at least three jurisdictions, which are as follows:

Adam works as a Computer Hacking Forensic Investigator for a garment company in the United States. A project has been assigned to him to investigate a case of a disloyal employee who is suspected of stealing design of the garments, which belongs to the company and selling those garments of the same design under different brand name. Adam investigated that the company does not have any policy related to the copy of design of the garments. He also investigated that the trademark under which the employee is selling the garments is almost identical to the original trademark of the company.

On the grounds of which of the following laws can the employee be prosecuted?
A . Espionage law
B . Trademark law
C . Cyber law
D . Copyright law

View Answer

Answer: B

Explanation:

The Trademark law is a piece of legislation that contains the federal statutes of trademark law in the United States. The Act prohibits a number of activities, including trademark infringement, trademark dilution, and false advertising. Trademarks were traditionally protected in the United States only under State common law, growing out of the tort of unfair competition. Trademark law in the United States is almost entirely enforced through private lawsuits. The exception is in the case of criminal counterfeiting of goods. Otherwise, the responsibility is entirely on the mark owner to file suit in either state or federal civil court in order to restrict an infringing use. Failure to "police" a mark by stopping infringing uses can result in the loss of protection.

ANS: D is incorrect. Copyright law of the United States governs the legally enforceable rights of creative and artistic works under the laws of the United States. Copyright law in the United States is part of federal law, and is authorized by the U.S. Constitution. The power to enact copyright law is granted in Article I, Section 8, Clause 8, also known as the Copyright Clause. This clause forms the basis for U.S. copyright law ("Science", "Authors", "Writings") and patent law ("useful Arts", "Inventors", "Discoveries"), and includes the limited terms (or durations) allowed for copyrights and patents ("limited Times"), as well as the items they may protect. In the U.S., registrations of claims of copyright, recordation of copyright transfers, and other administrative aspects of copyright are the responsibility of the United States Copyright Office, a part of the Library of Congress.

ANS: A is incorrect. The Espionage Act of 1917 was a United States federal law passed shortly after entering World War I, on June 15, 1917, which made it a crime for a person: To convey information with intent to interfere with the operation or success of the armed forces of the United States or to promote the success of its enemies. This was punishable by death or by imprisonment for not more than 30 years. To convey false reports or false statements with intent to interfere with the operation or success of the military or naval forces of the United States or to promote the success of its enemies and whoever when the United States is at war, to cause or attempt to cause insubordination, disloyalty, mutiny, refusal of duty, in the military or naval forces of the United States, or to willfully obstruct the recruiting or enlistment service of the United States.

ANS: C is incorrect. Cyber law is a very wide term, which wraps up the legal issue related to the use of communicative, transactional and distributive aspect of networked information device and technologies. It is commonly known as INTERNET LAW. These Laws are important to apply as Internet does not tend to make any geographical and jurisdictional boundaries clear; this is the reason why Cyber law is not very efficient.

A single transaction may involve the laws of at least three jurisdictions, which are as follows: