Given this "debug isdn q921" output, what is the problem with the PRI?

Refer to exhibit. Given this "debug isdn q921" output, what is the problem with the PRI?A . Nothing, the PRI is sending keepalives.B . Layer 2 is down on the controller.C . PRI does not have an IP address configured on the interface.D . Layer 1 is down on the...

April 6, 2024 No Comments READ MORE +

What is a characteristic of a SIP endpoint configured in Cisco UCM with ’Use Trusted Relay Point' set to "On’?

What is a characteristic of a SIP endpoint configured in Cisco UCM with ’Use Trusted Relay Point' set to "On’?A . It creates a trust relationship with the called party.B . It enables the Use Trusted Relay Point setting from the associated common device configuration.C . It enables Cisco UCM...

April 6, 2024 No Comments READ MORE +

Which action prevents toll fraud in Cisco UCM?

Which action prevents toll fraud in Cisco UCM?A . Implement route patterns in Cisco UCM.B . Implement toll fraud restriction in the Cisco IOS router.C . Allow off-net to off-net transfers.D . Configure ad hoc conference restriction.View AnswerAnswer: D

April 5, 2024 No Comments READ MORE +

Which behavior occurs when Cisco UCM has a CallManager group that consists of two subscribers?

Which behavior occurs when Cisco UCM has a CallManager group that consists of two subscribers?A . Endpoints attempt to register with the bottom subscriber in the list.B . Endpoints attempt to register with the top subscriber in the list.C . Endpoints attempt to register with both subscribers in a load-balanced...

April 5, 2024 No Comments READ MORE +

What is the cause of this problem?

An administrator executes the debug isdn q931 command while debugging a failed call. After a test call is placed, the logs return a disconnect cause code of 1. What is the cause of this problem?A . The media resource is unavailable.B . The destination number rejects the call.C . The...

April 5, 2024 No Comments READ MORE +

How must the IPV4 Pattern be configured?

An engineer must configure a SIP route pattern using domain routing with destination +13135551212. The domain ciscocm1.jupiter.com resolves to 192.168.1.3. How must the IPV4 Pattern be configured?A . [email protected] . ciscocm1.jupiter.comC . [email protected] . 192.168.1.3View AnswerAnswer: B

April 5, 2024 No Comments READ MORE +

What is required for Cisco UCM to accept SIP calls with a URI in the format of 'sip:[email protected]'?

What is required for Cisco UCM to accept SIP calls with a URI in the format of 'sip:[email protected]'?A . Define Cluster Fully Qualified Domain Name under Servers in Cisco UCM.B . Change the Destination Address to a Fully Qualified Domain Name on the SIP trunk.C . Define Cluster Fully Qualified...

April 5, 2024 No Comments READ MORE +

Which DHCP option must be set up tor new phones to obtain the TFTP server IP address?

Which DHCP option must be set up tor new phones to obtain the TFTP server IP address?A . option 66B . option 15C . option 6D . option 120View AnswerAnswer: A

April 5, 2024 No Comments READ MORE +

Which 10$ entry sets the required priority?

A customer is deploying a SIP IOS gateway for a customer who requires that in-band DTMF relay is first priority and out-of-band DTMF relay is second priority. Which 10$ entry sets the required priority?A . dtmf-relay cisco-rtpB . dtmf-relay sip-kpml cisco-rtpC . sip-notify dtmf-relay rtp-nteD . dtmf-relay rtp-nte sip-notifyView AnswerAnswer:...

April 4, 2024 No Comments READ MORE +

Which codec is used?

Refer to exhibit. An engineer configures a VoIP dial peer on a Cisco gateway. Which codec is used?A . G711alawB . No codec is used (missing codec command)C . G.711ulawD . G729r8View AnswerAnswer: D

April 4, 2024 No Comments READ MORE +