All switches are ArubaOS switches that currently have the default spanning tree priority. Switch-1 should be the root of the spanning tree If Switch-1 fails. Switch-2 should become root Which configuration for spanning tree priorities ensures this behavior?A . priority 15 on Switch-1 and priority 14 on Switch-2B . priority 0 on Switch-1 and...
Continue readingHow can the administrator find this information?
A network administrator suspects that interfaces in a link aggregation have been accidentally connected to multiple switches. The administrator wants to find the hostnames of the switches on the other side of the interfaces. How can the administrator find this information?A . Use the show lace command to view LACP information.B . Use the...
Continue readingWhich settings are required on ArubaOS switches for Aruba AirWave to discover, monitor, and manage them?
Which settings are required on ArubaOS switches for Aruba AirWave to discover, monitor, and manage them?A . credentials for Telnet or SSH login and an HTTPS certificateB . SNMP v2 community or v3 user and an HTTPS certificateC . credentials for Telnet or SSH login and an SNMP v2 community or v3 userD ....
Continue readingWhat does the switch do with this traffic?
After the administrator enters this command, packets arrive that are destined for 10.1.8.8 and 10.1.8 13 What does the switch do with this traffic?A . It forwards all of the traffic to 10.1.101.1.B . It load balances some of the traffic 10.1.101.1 and some to 10.1.104.2.C . It forwards all of the traffic to...
Continue readingHow can the network administrator find the interface that Switch-3 uses to forward traffic from the Client to the Server?
How can the network administrator find the interface that Switch-3 uses to forward traffic from the Client to the Server?A . View the MAC forwarding table.B . View the LLDP remote devices list.C . View the IP routing table.D . View the ARP table. View Answer Answer: C...
Continue readingWhat is the correct next hop for the route?
A network administrator creates a route to 10.1.2.0724 on Switch-4. What is the correct next hop for the route?A . 10.1.0.2B . 10.1.0.9C . 10.1.0.1D . 10.1.21 View Answer Answer: C...
Continue readingWhat should network administrators ensure before they connect the new IAP?
A company has a cluster of Aruba Instant APs (lAPs). The company wants to add a new IAP to the cluster. What should network administrators ensure before they connect the new IAP?A . that the new IAP has been provisioned with an IP address and the IP address of the cluster virtual controller (VC)B...
Continue readingWhat does the switch do with the traffic?
This ArubaOS switch receives traffic without a VLAN tag on a switch port 1. The traffic is destined to a MAC address learned on port 2. What does the switch do with the traffic?A . It forwards the traffic on port 2 without a VLAN tag.B . It floods the traffic on port 2...
Continue readingWhat is required for the switch to combine both interfaces in a link aggregation?
A network administrator enters this command on an ArubaOS switch: Switch(config) # trunk 1,2 trk1 What is required for the switch to combine both interfaces in a link aggregation?A . that the interfaces are upB . that the interfaces are aggregated while in a shutdown stateC . that the interfaces are up and connect...
Continue readingWhich procedure follows the best practices and requirements to set up the VSF links?
An Aruba Virtual Switching Framework (VSF) fabric has 10GbE interfaces assigned to its VSF link. The network administrator wants to change the link to use 40GbE interfaces. Which procedure follows the best practices and requirements to set up the VSF links?A . Create an LACP link aggregation on the 40GbE interfaces, and then add...
Continue reading