- All Exams Instant Download
Which HP software platform provides centralized network management, monitoring, and configuration of wired and wireless network infrastructure devices, as well as traffic monitoring, user management, and other capabilities?
Which HP software platform provides centralized network management, monitoring, and configuration of wired and wireless network infrastructure devices, as well as traffic monitoring, user management, and other capabilities?A . HP IntelligentManagement Center (IMC)B . HP Intelligent Resilient Framework (IRF)C . HP Virtual Cloud Networking (VCN)D . HP Virtual Connect FlexFabricView...
Which method of link aggregation do both HP ProVision and Comware switches support?
Which method of link aggregation do both HP ProVision and Comware switches support?A . Static LACPB . Fast EthernetC . Dynamic LACPD . Distributed TrunkingView AnswerAnswer: A
PC1 cannot reach PC2. Based on the exhibits, what could be causing this error?
Refer to the exhibits. Exhibit 1 Exhibit 2 PC1 cannot reach PC2. Based on the exhibits, what could be causing this error?A . PC1 has the wrong IP address for its default gateway setting.B . Router A has a direct route, instead of a static route, to 10.1.10.0/24.C . The...
Which statement is true about wireless technologies?
Which statement is true about wireless technologies?A . 802.11b/g uses an 802.11a-compatible frequencyB . 802.11a has higher data rates than 802.11g does.C . 802.11n users MIMO technology to improve throughputD . 802.11a uses the less crowded 2.4 GHz rangeView AnswerAnswer: C
Which feature should the network administrator implement to accomplish this?
A customer wants to implement multiple links between a server and a single HP Comware switch in order to increase the amount of bandwidth for more throughput. Which feature should the network administrator implement to accomplish this?A . MSTPB . IRFC . link aggregationD . MIMOView AnswerAnswer: B
Which statement describes how the administrator can accomplish this?
A server connects to a port on an HP Comware switch. The network administrator wants to ensure that: - the port remains forwarding during Multiple Spanning Tree Protocol (MSTP) topology changes, and - changes in the port status do not cause MSTP topology changes. Which statement describes how the administrator...
Refer to the Exhibit.
Refer to the Exhibit. Exhibit: HP Comware switch configuration. [Comware] vlan 100 [Comware-vlan100] quit [Comware] vlan 200 [Comware-vlan200] quit [Comware] interface g1/0/22 [Comware-GigabitEthernet1/0/22] port link-type trunk [Comware-GigabitEthernet1/0/22] port trunk permit vlan 100 200 [Comware-GigabitEthernet1/0/22] quitA . ProVision (config) # vlan 100 ProVision (config) # vlan 200 ProVision (config) # vlan...
What should the administrator do to protect these communications in this failover situation?
Refer to the exhibits. Exhibit 1 Exhibit 2 All of the switches in Exhibit 1 are routing switches. Exhibit 2 shows the routes configured on these switches. The direct (connected) routes are not shown, but assume that links are configured with the IP addresses shown in Exhibit 1. The network...
What should the administrator ensure?
A network administrator configures this command on an HP ProVision switch: vlan 30 ip helper-address 10.0.3.253 The switch is able to ping 10.0.3.253. After the administrator configures the command, users in VLAN 30 report that their PCs fall to acquire addresses using DHCP. What should the administrator ensure?A . that...
Which feature should the network administrator implement to accomplish this?
A customer wants to implement multiple links between a server and a single HP Comware switch in order to increase the amount of bandwidth for more throughput. Which feature should the network administrator implement to accomplish this?A . MSTPB . IRFC . link aggregationD . MIMOView AnswerAnswer: B
