DES-4122

Which type of access is known as Firmware RACADM on a Dell EMC PowerEdge server?A . Accessing RACADM running the Dell ToolkitB . Accessing RACADM with OpenManage softwareC . Logging into iDRAC using SSH or TelnetD . Logging into iDRAC through Boot ManagerView AnswerAnswer: C

Dell EMC PowerEdge 14G servers support which technology?A . Quicksync 1.0B . Intel Boot GuardC . AMD GuardMID . iDRAC8View AnswerAnswer: C

DRAG DROP Refer to the exhibit. Match each callout to the Dell EMC PowerEdge server model shown. View AnswerAnswer:

A company that has very specific firmware requirements has acquired Dell EMC PowerEdge servers Any replaced parts of the type must match the original parts identically. The procedure must be as simple as possible with minimal risk. What action should a technician take to help accomplish this goal?A . Configure...

Where is the data stored to allow Easy Restore to successfully complete a system board replacement?A . NAND Flash module on the disk drive mid planeB . IDSDM SD cardC . vFlash SD cardD . Serial Flash storage in the server's front panelView AnswerAnswer: C

What is the purpose of the Silicon-Based Hardware Root of Trust feature in Dell EMC PowerEdge 14G servers?A . Ensures that the installed operating system is authenticB . Ensures that the server has a valid Service Tag numberC . Ensures that no unauthorized BIOS or firmware codes are runD ....

What are the default settings used when applying firmware and a configuration to a replaced part using the Lifecycle Controller?A . Firmware: Upgrade to latest available version Configuration Apply alwaysB . Firmware Allow version upgrade only Configuration: DisabledC . Firmware: Match firmware of replaced part Configuration Apply alwaysD . Firmware...

A technician needs to repurpose a Dell EMC PowerEdge server. The server has dual processors with 18 cores each The OS only "sees" 24 threads in total. Which setting should the technician change in Processor Settings in the System BIOS?A . System ProfileB . Virtualization TechnologyC . HyperThreadingD . Number...

After completing a disk rebuild operation, a technician needs to configure the system so that the rebuild process happens faster the expense of slowing users down. Which setting should be changed?A . Rebuild Rate in the BIOS settingsB . System Profile to Performance in the BIOS settingsC . System Profile...

DRAG DROP What is the correct order of steps taken during the BIOS/UEFI Recovery process? View AnswerAnswer: