1Y0-241 V1

Scenario: To receive data alerts for failures, a Citrix Administrator is configuring SNMP on the Citrix ADC. The administrator is confident that the manager, alarms and SNMP traps are configured correctly. The following week, there is a Citrix ADC-related outage and the administrator does NOT receive any alerts.

What could be the reason for this alert failure?
A . The Citrix Web App Firewall is blocking the alerts from going out.
B. The community name was NOT configured in the Citrix ADC SNMP trap destination settings.
C. The Citrix ADC only has standard licensing.
D. The Citrix ADC is configured for SNMP version 1.

View Answer

Answer: B

A Citrix Administrator notices that the Citrix ADC is sending the IP addresses of all the active services in the DNS response.

The administrator can use the set gslb vServer<name> __________________ parameter to change this behavior.
A . EDR ENABLED
B. MIR DISABLED
C. MIR ENABLED
D. EDR DISABLED

View Answer

Answer: D

Scenario: A Citrix Administrator manages an environment that has a Citrix ADC high availability (HA) pair running on two MPX appliances. The administrator notices that the state of the secondary Citrix ADC is ‘Unknown’.

What is causing the secondary state to be ‘Unknown’?
A . The synchronization on the secondary appliance is disabled.
B. TCP port 22 is disabled between the primary and secondary ADCs.
C. The administrator made both Citrix ADCs primary.
D. The remote procedure call (RPC) nodes are incorrectly configured.

View Answer

Answer: D

Explanation:

https://docs.citrix.com/en-us/citrix-adc/current-release/system/high-availability-introduction/troubleshooting-high-availability.html

Scenario: A Citrix Administrator executed the command below in an active-active, global server load balancing (GSLB) setup.

set gslb parameter CldnsprobeOrder DNS PING TCP

The order to calculate the _____ for dynamic proximity will be the DNS UDP query followed by the ping and then TCP. (Choose the correct option to complete the sentence.)
A . Time to live (TTL)
B. Empty Domain Service (EDS)
C. Multiple IP responses (MIR)
D. Round-trip time (RTT)

View Answer

Answer: D

Explanation:

https://docs.citrix.com/en-us/citrix-adc/current-release/global-server-load-balancing/methods/dynamic-round-trip-time-method.html

Reference: https://docs.citrix.com/en-us/citrix-adc/current-release/global-server-load-balancing/methods/dynamic-round-trip-time-method.html

Scenario: A Citrix Administrator configured a Citrix ADC active-passive, high availability (HA) pair. The HA pair failed over and customers were unable to access hosted websites. The administrator troubleshoots and discovers that the upstream router is NOT updating its ARP table.

What can the administrator configure to resolve this issue?
A . Independent Network Configuration (INC) mode
B. Route monitor
C. HA monitor
D. Virtual MAC

View Answer

Answer: D

Scenario: A Citrix Administrator configured Citrix ADC load balancing to send requests to one of three identical backend servers. Each server handles multiple protocols, and load

balancing is set up in round-robin mode.

The current load-balancing setup on the Citrix ADC is:

✑ One load-balancing vServer with one externally accessible VIP

✑ One service created for each protocol type

✑ One server entity for each backend resource

During business hours, the administrator wants to make changes to one backend server without affecting the other servers.

What is the most efficient way for the administrator to ensure that all traffic is routed away from the server without impeding responses from other resources?
A . Disable the backend service entity targeted for change.
B. Disable the backend server entity targeted for change.
C. Disable the load-balancing vServer.
D. Unbind the correct server entity from the load-balancing vServer.

View Answer

Answer: B

Scenario: A Junior Citrix Administrator needs to create a content switching vServer on a Citrix ADC high availability (HA) pair. The NSIP addresses are 192.168.20.10 and 192.168.20.11. The junior administrator connects to NSIP address 192.168.20.10 and saves the changes.

The following day, a Senior Citrix Administrator tests the new content switching vServer, but it is NOT working. The senior administrator connects to the HA pair and discovers that everything the junior administrator configured is NOT visible.

Why has the Citrix ADC lost the newly added configurations?
A . The junior administrator made the changes and did NOT force a failover to save the configuration.
B. The junior administrator connected to the NSIP of the secondary Citrix ADC in the HA pair.
C. Both Citrix ADCs in the HA pair restarted overnight.
D. The Citrix ADC appliances have different firmware versions.

View Answer

Answer: B

Explanation:

"You are connected to the secondary node…" when first login to the NSIP and after saving the configuration

What is the first thing a Citrix Administrator should develop when creating a server certificate for Citrix ADC to secure traffic?
A . A private key
B. A certificate revocation list (CRL)
C. A certificate signing request (CSR)
D. A certificate key-pair

View Answer

Answer: A

Explanation:

https://docs.citrix.com/en-us/citrix-adc/current-release/ssl/how-to-articles/create-and-use-ssl-certificates-on-a-citrix-adc-appliance.html

Scenario: A Citrix Administrator installed the compression feature on the web servers. To offload the compression on the Citrix ADC, the administrator configured the Citrix ADC appliance to remove the ‘Accept Encoding’ header from all HTTP client requests. However, the administrator observes that data is NOT being compressed by the Citrix ADC, even though the ‘Accept Encoding’ header is being removed from all requests.

What could be the cause of this issue?
A . The rewrite policy is bound at an incorrect bind point
B. The servers are automatically compressing all responses
C. The compression policy needs to be reconfigured
D. Servercmp is disabled on the Citrix ADC

View Answer

Answer: C

Scenario: A Citrix Administrator configures an Access Control List (ACL) to block traffic from the IP address 10.102.29.5: add simpleacl rule1 DENY -srcIP 10.102 29.5

A week later the administrator discovers that the ACL is no longer present on the Citrix ADC.

What could be the reason for this?
A . The administrator did NOT run the apply ACL command.
B. The simple ACLs remain active for only 600 seconds.
C. The simple ACLs remain active for only 60 seconds.
D. The Citrix ADC has been restarted without saving the configurations.

View Answer

Answer: D