Cisco 300-365 Deploying Cisco Wireless Enterprise Networks Online Training
Cisco 300-365 Online Training
The questions for 300-365 were last updated at Oct 13,2025.
- Exam Code: 300-365
- Exam Name: Deploying Cisco Wireless Enterprise Networks
- Certification Provider: Cisco
- Latest update: Oct 13,2025
A customer has limited staff to manage a wireless network. The customer wants a solution that requires minimum hardware.
Which type of architecture do you propose?
- A . centralized
- B . distributed
- C . cloud-based
- D . unified
Controllers WLC_1 and WLC_2 are in the same mobility group. A wireless client that does not have the same VLAN interface roams from WLC_1 to WLC_2.
What happens to the client roaming?
- A . The client context is deleted in controller WLC_1, and a new client context is created in WLC_2 to become the anchor controller
- B . The client context is moved from controller WLC_1 to controller WLC_2. The result is that the WLC_1 client context is deleted and WLC_2 becomes the anchor controller.
- C . The client context is copied from controller WLC_1 to controller WLC_2. The result is that WLC_1 becomes the foreign controller and WLC_2 becomes the anchor controller.
- D . The client context is copied from controller WLC_1 to controller WLC_2. The result is that WLC_1 becomes the anchor controller and WLC_2 becomes the foreign controller.
An engineer wants to configure Call Admission Control and ensure that AC is based on the capacity of the AP and considering the possible impact of other APs in the area.
Which two configuration options are required? (Choose two.)
- A . StaticCAC
- B . Admission Control
- C . Load-Based AC
- D . Add Traffic Stream
- E . Reserved Roaming Bandwidth
- F . Expedited Bandwidth
By default, how long does a Mobility Services Engine wait for an echo response from a Wireless LAN Controller before declaring the neighbor dead?
- A . 10 Seconds
- B . 60 Seconds
- C . 15 Seconds
- D . 30 Seconds
Which network is connected by default when connecting to the unused Ethernet port of a MAP?
- A . the native VLAN that the MAP is connected to
- B . the VLAN that is associated with WLAN number 1 in the WLC
- C . the native VLAN that the WLC is connected to
- D . the VLAN that is associated with the SSID that the MAPs are communicating on
An engineer must deploy FlexConnect APs to a site that typically has 300 ms latency to the WLC.
Which typical operating mode must the engineer plan on for normal operations?
- A . local authentication, local switching
- B . central authentication, central switching
- C . central authentication, local switching
- D . connected mode
A customer has implemented a wireless network that requires tuning for High Density applications utilizing the RX-SOP feature. They are experiencing a high noise floor (average of -65 dBm) and expect that to decrease significantly. A sampling of radios determine that most Access Points have neighbors on the same channel at a power level of -75 dBm.
Which value should the customer use to start tuning RX-SOP?
- A . -60 dBm
- B . -65dBm
- C . -70 dBm
- D . -75 dBm
- E . -80 dBm
A customer is implementing a massively scaled guest wireless network to support approximately 32,000 clients. For ease of administration, they have required implementing multiple interfaces defined on the WLC and mapped to a single interface group.
Which configuration meets this need?
- A . 264 interfaces of/25 sized networks
- B . 132 interfaces of/24 sized networks
- C . 66 interfaces of/23 sized networks
- D . 33 interfaces of /22 sized networks
DRAG DROP
Drag the QoS values from the left and drop them in the correct descending order of priority on the right.
A FlexConnect remote office deployment is using five 2702i APs indoors and two 1532i APs outdoors. When a code upgrade is performed and FlexConnect Smart AP Image Upgrade is leveraged, but no FlexConnect Master AP has been configured.
How many image transfers between the WLC and APs will occur?
- A . 7
- B . 1
- C . 5
- D . 2