Cisco 300-360 Designing Cisco Wireless Enterprise Networks Online Training
Cisco 300-360 Online Training
The questions for 300-360 were last updated at Sep 08,2025.
- Exam Code: 300-360
- Exam Name: Designing Cisco Wireless Enterprise Networks
- Certification Provider: Cisco
- Latest update: Sep 08,2025
When reviewing a design for a voice over wireless deployment, what per-call bandwidth cost should be factored in when determining maximum calls per cell using SIP and G.711u as the codec?
- A . 64 bytes
- B . 8 bytes
- C . 80 bytes
- D . 10 bytes
An engineer receives a digital image scanned from the floor plans of a facility to be surveyed for wireless survey and imported it into Air Magnet Pro.
However, the document contains no scale.
Which action can the engineer take to most accurately calibrate the size of the floor plan in Air Magnet?
- A . Mark the length of a hallway, then count the ceiling tiles, multiply that number by 2 and enter that value.
- B . Zoom in and mark across a hallway, then count the floor tiles across that hallway and enter that value.
- C . Zoom in and mark a doorway, then size it at 3 feet because most doorways are 36 inches.
- D . Mark the entire longest dimension of the floorplan, then use Google Earth to measure the corresponding outside dimension and enter that value.
Which list of characteristics must all controllers in a mobility group have in common based on best practices?
- A . mobility group name, version of controller code, Control and Provisioning of Wireless Access Points mode, ACLs, and WLANs (SSIDs)
- B . mobility domain name, version of controller code, and Control and Provisioning of Wireless Access Points mode
- C . mobility domain name, version of controller code, Control and Provisioning of Wireless Access Points mode, ACLs, and WLANs (SSIDs)
- D . mobility group name, version of controller code, and Control and Provisioning of Wireless Access Points mode
An engineer is conducting a location readiness test and wants a selected point to be considered location-ready.
Which three possible configurations reflect the minimum number of APs needed? (Choose three.)
- A . One AP is resident in each quadrant surrounding the point-in-question.
- B . One AP per 1400 sq. ft. on the map.
- C . Two APs are resident in each quadrant surrounding the point-in-question.
- D . Four APs are deployed on the floor.
- E . Three APs are within 70 feet (21 meters) of the point-in-question.
- F . Three APs are deployed on the floor.
When conducting a wireless survey at a customer facility, signal attenuation in an area that is surrounded by thick glass walls is noted as 2dB.
When configuring Cisco Prime Infrastructure, which obstacle should be placed in a map editor to represent the impact the glass wall will have on the RF signal in the facility?
- A . heavy door
- B . thick wall
- C . glass
- D . light wall
An engineer would like to calibrate the RF environment to improve accuracy.
Which wireless attribute is added to the floor-level calculation by calibrating the floor?
- A . attenuation
- B . TX power
- C . multipath
- D . SNR
A network engineer wants the DSCP marking to align with the 802.11e access category video.
What will this marking be?
- A . 34
- B . AF31
- C . 4
- D . 5
An engineer is performing a predictive wireless design for a Parts Distribution Center, which requires data and location services.
Which three requirements are inputs to the design? (Choose three.)
- A . access points with directional antennas
- B . continuous -67 dBm coverage from one access point
- C . overlapping -75 dBm coverage from three access points
- D . overlapping -67 dBm coverage from two access points
- E . access points in IPS mode
- F . continuous -72 dBm coverage from one access point
- G . access points in corners and along perimeters
What is the optimal distance between APs for location services without considering the physical environment?
- A . 10 to 25 feet
- B . 90 to 120 feet
- C . 50 to 70 feet
- D . 80 to 100 feet
An engineer is configuring an autonomous AP for RADIUS authentication.
What three pieces of information must be known to configure the AP? (Choose three.)
- A . BVI IP address
- B . group name
- C . RADIUS IP address
- D . PAC encryption key
- E . username and password
- F . shared secret
Latest 300-360 Dumps Valid Version with 221 Q&As
Latest And Valid Q&A | Instant Download | Once Fail, Full Refund
