Cisco 200-150 Introducing Cisco Data Center Networking Online Training
Cisco 200-150 Online Training
The questions for 200-150 were last updated at Oct 23,2025.
- Exam Code: 200-150
- Exam Name: Introducing Cisco Data Center Networking
- Certification Provider: Cisco
- Latest update: Oct 23,2025
Instructions:
– THIS TASK DOES NOT REAUIRE DEVICE CONFIGURATION.
– To access the multiple- choice questions, click on the numbered boxes on the left of the top panel.
– There are four multiple- choice questions with this task. Be sure to answer all four questions before selecting the Next button.
Scenario:
Customer is configuring FCoE and NPV in their Data Center on Cisco Nexus 5000 Series Switches. Please go through the Topology and Exhibit 1 through 4 to answer the questions.
Topology:

Exhibit 1.

Exhibit 2.

Exhibit 3.

Exhibit 4.

Which statement regarding Cisco Nexus 5000 Series switches is true?
- A . Cisco Nexus5000 Series switches operate in IP routing mode.
- B . Cisco Nexus 5000 Series switches operate in FCoE mode.
- C . Cisco Nexus 5000 Series switches operate in fabric mode.
- D . Cisco Nexus 5000 Series switches operate in NPV mode.
Instructions:
– THIS TASK DOES NOT REAUIRE DEVICE CONFIGURATION.
– To access the multiple- choice questions, click on the numbered boxes on the left of the top panel.
– There are four multiple- choice questions with this task. Be sure to answer all four questions before selecting the Next button.
Scenario: Customer is configuring FCoE and NPV in their Data Center on Cisco Nexus 5000 Series Switches. Please go through the Topology and Exhibit 1 through 4 to answer the questions.
Topology:

Exhibit 1.

Exhibit 2.

Exhibit 3.

Exhibit 4.

Which statement is true regarding configuring NPV mode?
- A . When you enable NPV, the system configuration is erased and the switch reboots.
- B . When you enable NPV, the system configuration is not erased and the switch doesn’t reboot.
- C . In Exhibit 3 NPV is enabled. but Server Interface to the external switch is not tied to correct vfc 2/1.
- D . In NPV mode, the core switch relays all traffic from server-side ports to the edge switch and core switch provides N ports.
Instructions:
– THIS TASK DOES NOT REAUIRE DEVICE CONFIGURATION.
– To access the multiple- choice questions, click on the numbered boxes on the left of the top panel.
– There are four multiple- choice questions with this task. Be sure to answer all four questions before selecting the Next button.
Scenario: Customer is configuring FCoE and NPV in their Data Center on Cisco Nexus 5000 Series Switches. Please go through the Topology and Exhibit 1 through 4 to answer the questions.
Topology:

Exhibit 1.

Exhibit 2.

Exhibit 3.

Exhibit 4.

What can you tell about server ports and their external interfaces from the exhibits?
- A . vfc 3/1 is not correctly connected to server external interface fc2/1.
- B . vfc 3/1 is not correctly connected to server external interface fc2/1 and flogi are unsuccessful.
- C . Server interface vfc 3/1 is assigned to NP uplinks fc2/1, fc2/2, fv2/3, and fc2/4. There are 4 successful flogi.
- D . Server interface vfc 3/1 is assigned to NP uplinks fc2/1, fc2/2, fv2/3, and fc2/4. There are 4 flogi are in initialization state.
Instructions:
– THIS TASK DOES NOT REAUIRE DEVICE CONFIGURATION.
– To access the multiple- choice questions, click on the numbered boxes on the left of the top panel.
– There are four multiple- choice questions with this task. Be sure to answer all four questions before selecting the Next button.
Scenario:
Customer is configuring FCoE and NPV in their Data Center on Cisco Nexus 5000 Series Switches. Please go through the Topology and Exhibit 1 through 4 to answer the questions.
Topology:

Exhibit 1.

Exhibit 2.

Exhibit 3.

Exhibit 4.

Which two statements are true regarding disruptive load balancing and regarding the configuration in this example? (Choose two.)
- A . In this scenario disruptive load balancing is disabled.
- B . In this scenario disruptive load balancing is enabled.
- C . Since FCID: 0x1c0000 is reserved, disruptive load balancing is not configured correctly.
- D . When disruptive load balancing is enabled, NPV redistributes the server interfaces across all available NP uplinks when a new NP uplink becomes operational. To move a server interface from one NP uplink to another NP uplink, NPV forces reiinitialization of the server interface so that the server performs a new login to the core switch.
A network design team has decided to use a standard protocol to consolidate the Ethernet and SAN data using the existing Nexus switches.
Which I/O technology can satisfy this need?
- A . FCoE
- B . IEEE 802.1AB
- C . SCSI
- D . AToM
Which command set will create an access control list on a Cisco Nexus switch to permit only unencrypted Web traffic from any source to destination host 10.10.1.110?
- A . N5K-A(con fi g)#access-list 101 permit tcp any host 10.10.1.110 eq 80
- B . N5K-A(config)#ip access-list 101
N5K-A(config-acl)#permit tcp any host 10.10.1.110 eq 80
N5K-A (config-acl)#permit ip any any - C . N5K-A(config)#ipaccess-list 101
N5K-A(config-acl)#permit tcp any host 10.10.1.110 eq 80 - D . N5K-A(config)#access-list 101 permit tcp any host 10.10.1.110 eq 80
N5K-A(config)#access-list 101 deny ip any any
An administrator connected a new server to a Cisco MDs 9222i on Port FCL/20, but did not capture the world wide name of the host bus adapter.
Which command returns the needed information?
- A . show wwn status
- B . show interface fc 1/20
- C . show flogi database
- D . show fcs database
Which two terms can take the place of the wildcard mask in an ACL? (Choose two.)
- A . eq
- B . deny
- C . host
- D . all
- E . any
Which Cisco UCS power policy mode enables a configuration that can tolerate the loss of an input power circuit?
- A . nonredundant
- B . Grid
- C . N+1 in normal mode
- D . N+1 in high-density mode
A network uses one pair of Layer 3 switches for core and distribution purposes.
Which design is this network using?
- A . collapsed core
- B . collapsed distribution
- C . collapsed Layer 3 core
- D . collapsed Layer 2-3