Avaya 71301X Avaya Aura Communication Applications Implement Certified Exam Online Training

Exam4Training provides a clear and superior solutions for each Avaya 71301X exam candidates. We provide you with the Avaya 71301X Avaya Aura Communication Applications Implement Certified Exam Online Training. Our team of IT experts is the most experienced and qualified. Our ACIS 71301X test is almost like the real exam. This is really amazing. More importantly, the examination pass rate of 71301X Avaya Aura Communication Applications Implement Certified Exam is highest in the worldwide.

Page 1 of 2

1. Which statement about the SIP Entities to support single node Avaya Aura® Presence Services is true?

Only one SIP Entity is built of Type = “Presence Services”, which uses the SM100 IP address of the Avaya Breeze™ node.

Only one SIP Entity is built of Type = “Avaya Breeze”, which uses the SM100 IP address of the Avaya Breeze™ node.

Two SIP Entities are built to the same SM100 IP address of each node. One is of type = “Avaya Breeze”, and the other is of Type = “Presence Services”.

Two SIP Entities are built to the same SM100 IP address of each node. One is of type = “Avaya Breeze”, and the other is of Type = “Other”.

2. Which three steps are necessary to make a successful Implementation of Avaya Breeze™ WebRTC Snap-in? (Choose three.)

Load the Snap-in.

Download and Install WebRTC License file.

Busy and Release the WebRTC snap-in.

Manually configure the WebLM IP address in the WebRTC configuration attributes.

Install the Snap-in.

3. After running the Install wizard on Avaya Session Border Controller for Enterprise (SBCE), you added a Public Outside IP address to the B1 interface. You try to ping this IP address from a PC in the same subnet but it falls.

What would you do first to resolve the issue?

Restart Applications.

Set the Default Gateway router IP address, navigate to the Interfaces and Enable the B1 Interface.

Reboot SBC

Navigate to Device Specific Settings > Network Management > Interfaces and Enable the B1 interface.

4. A field engineer runs the Installation Wizard to install the Avaya Session Border Controller for Enterprise (SBCE).

Which statement about the Domain Name Service (DNS) configuration is true?

A DNS address always needs to be configured for both the Primary and Secondary DNS, even if only the DNS is available.

A DNS address does not need to be configured.

A DNS address needs to be configured, even if it is unused and/or unreachable.

A DNS address should not be configured here.

5. When planning the Avaya Session Border Controller for Enterprise (SBCE) for SIP Trunking, what is a good practice to adopt?

Name Interfaces consistently, for example, A1 for Internal network to Call Server and B1 for external to Trunk Server.

Name all internal and external interfaces exactly the same.

Use the same IP address on both, internal and external sides of the network.

Use one Avaya Session Border Controller for Enterprise on the internal and external sides of the network.

6. WebRTC is used for which type of calls?

video calls only

calls originated from internal web browsers only

calls originated from external web browsers only

calls originated from internal and external web browsers

7. The media stream in WebRTC is anchored on which Avaya Aura® component?

Avaya Aura® Media Gateway G430/G450

Avaya Aura® Media Server (AAMS)

No DSP Resources are required

G650 Medpro

8. You are creating the identity certificates that must be installed in the Avaya Session Border Controller for Enterprise (SBCE).

Which statement about installing the certificate files in the SBCE is true?

The cert file and the Key filenames generated by the Certificate Authority must match.

Both the PEM and Key files must be in a zip file.

The SBCE must be rebooted before the files installation.

The cert file and the Key filenames generated by the Certificate Authority must be different.

9. You are setting up the SIP connection between Avaya Aura® Messaging (AAM) and the

Avaya Aura® Core, and the information you have entered for the Far-end connection is:

What should you conclude from all this information?

The connection cannot work because 5061 is not the Well-known port corresponding to TLS by standard.

There will be conflicts in the TLS connections given that 5061 is a well-known port that other Endpoints and Servers use within the same network.

A Security Certificate from the same Certificate Authority as the other Avaya Aura® components, must be installed on the AAM Server to guarantee successful TLS Connections.

The IP address is wrong because its range does not correspond to a valid TLS-compatible IP address.

10. What identifies that the Avaya Breeze™ server is using Identity Certificates that have been signed by Avaya Aura® System Manager (SMGR)?

if the Issuer Name states “O=AVAYA, OU=MGMT, CN= System Manager CA” for the Security Module SIP Identity Certificate

if the replication status is showing ‘Synchronized’ with a green background color

if a successfully installed WebRTC snap-in is used

if the Entity Link between Avaya Aura® Session Manager (SM) and Avaya Breeze™ server is up

Page 2 of 2

11. Which access control method is used by the Avaya Aura® Application Enablement Services (AES) server for administrators?

Single Administrator simple password login

Challenge-Response shared-key method only

System Manager AES Management Menu

Role-Based Access Control

12. Which statement about WebRTC and Media Resources is true?

WebRTC does not use any Media Resources since it only handles Text-Chat sessions.

WebRTC relies on the Avaya Aura® Media Server (AAMS) to convert the WebRTC media stream to a SIP media stream.

WebRTC uses its own embedded proprietary technology to handle and process Media Packets.

WebRTC uses Media Resources from a Hard-Based Media Gateway controlled by Avaya Aura® Communication Manager (CM).

13. When Avaya Aura® Presence Services is implemented, which statement is true about Port Management?

It allows multi-media services over a standard Web-Browser.

It allows independent management capabilities to filter out undesired message to every Avaya Aura® Presence Services user.

It collects statistics about Port-Usage from each Presence-compatible endpoint across the network.

Port 5222 is used for one-X® Endpoints, while Port 5269 is open for connecting with other XMPP 3rd-Party Servers.

14. For an Avaya SIP telephone, working as a Remote Worker via the Avaya Session Border Controller for Enterprise (SBCE), which IP address should be configured in the Server List of the one-X® Communicator?

the SBCE Internal Interface allocated for Mobile Workspace Endpoint

the SBCE External Interface allocated for Mobile Workspace Endpoint

the Internal Avaya Aura® Session Manager SM100 IP Address

the Avaya Aura® Session Manager External Interface allocated for Mobile Workspace Endpoints.

15. Which four kinds of services does the TSAPI standard provide for third-party call control over Avaya Aura® Communication Manager (CM)? (Choose four.)

receiving notifications of events

controlling specific calls or stations

invoking CM features

performing a remote reboot to the CM server

completing the routing of incoming calls

adding new feature buttons to agent sets

16. On Avaya Session Border Controller for Enterprise (SBCE), where do you access the tool that displays SIP messages, in real time, as they pass through the SBCE?

from Avaya Aura® System Manager, navigate to “Session Border Controller for Enterprise > SBCE Administration” menu

from the SBCE EMS Web Console

from the SBCE Server command line via SSH session, using PuTTY

from the traceSIP client installed on a local PC

17. Avaya Aura® Presence Services 7.x is implemented on Avaya Breeze™ (formerly Engagement Development Platform (EDP)).

When looking at Elements > Breeze > Service Management > Services, which status would you expect for a Presence Services snap-in that is ready to support Avaya Aura® Presence Services?

Accepting

Loaded

Installed

Active

18. In Avaya Aura® Messaging (AAM) 6.3, how many Call Answering Ports can one Application Server support?

up to 100 Ports

up to 10 Ports

up to 1000 Ports

up to 10000 Ports

19. Which statement describes Cross-Origin Resource Sharing (CORS)?

It allows for signaling-groups to be used by more than one trunk-group.

It is a W3C specification that allows cross-domain communication from the browser.

It is making DSP resources available regardless of the originating location of a call.

It is a network setup by which an Avaya Aura® Media Server (AAMS) can be used by more than one Avaya Aura® Communications Manager (CM).

20. By default, which Codec does Avaya Aura® Messaging (AAM) support?

726

722

711

729

Latest 71301X Dumps Valid Version with 70 Q&As

Latest And Valid Q&A | Instant Download | Once Fail, Full Refund

Instant Download 71301X PDF

Latest 71301X Dumps Valid Version with 70 Q&As

Leave a Reply Cancel reply