Exam4Training

Which type of port should you use to accomplish this task?

You must use one logical uplink for Fibre Channel traffic and Ethernet traffic on a Cisco UCS system.

Which type of port should you use to accomplish this task?
A . FCoE storage
B . server
C . FCoE uplink
D . uplink

Answer: C

Explanation:

Server and Uplink Ports on the Fabric Interconnect Each fabric interconnect has a set of ports in a fixed port module that you can configure as either server ports or uplink Ethernet ports. These ports are not reserved. They cannot be used by a Cisco UCS instance until you configure them.

You can add expansion modules to increase the number of uplink ports on the fabric interconnect

or to add uplink Fibre Channel ports to the fabric interconnect.

You need to create LAN pin groups and SAN pin groups to pin traffic from servers to an uplink

port.

Each fabric interconnect can include the following types of ports:

Server Ports

Server ports handle data traffic between the fabric interconnect and the adapter cards on the

servers.

You can only configure server ports on the fixed port module. Expansion modules do not include

server ports.

Uplink Ethernet Ports

Uplink Ethernet ports handle Ethernet traffic between the fabric interconnect and the next layer of

the network. All network-bound Ethernet traffic is pinned to one of these ports. By default,

Ethernet ports are unconfigured.

However, you can configure them to function in the following ways:

Server

Uplink

FCoE

Appliance

You can configure uplink Ethernet ports on either the fixed module or an expansion module.

Uplink Fibre Channel Ports

Uplink Fibre Channel ports handle FCoE traffic between the fabric interconnect and the next layer of the network. All network-bound FCoE traffic is pinned to one of these ports. By default, Fibre Channel ports are uplink.

However, you can configure them to function as Fibre Channel storage ports. This is useful in cases where a Cisco UCS requires a connection to a Direct-Attached Storage (DAS) device. You can only configure uplink Fibre Channel ports on an expansion module. The fixed module does not include uplink Fibre Channel ports.

Latest 300-160 Dumps Valid Version with 451 Q&As

Latest And Valid Q&A | Instant Download | Once Fail, Full Refund

Exit mobile version