USGBC LEED AP O+M LEED AP Operations + Maintenance (LEED AP O+M) Online Training
USGBC LEED AP O+M Online Training
The questions for LEED AP O+M were last updated at Jul 18,2025.
- Exam Code: LEED AP O+M
- Exam Name: LEED AP Operations + Maintenance (LEED AP O+M)
- Certification Provider: USGBC
- Latest update: Jul 18,2025
In densely populated rooms, CO2 monitors must be located a minimum of how many feet (meters) above the floor?
- A . 2 ft. (0.6 m)
- B . 3 ft. (0.9 m)
- C . 4 ft. (1.2 m)
- D . 5 ft. (1.5 m)
What is the maximum number of points a project could achieve using innovation credits for the Innovation Credit, Innovation?
- A . One point
- B . Two points
- C . Three points
- D . Four points
A project is pursuing Materials and Resources Credit, Solid Waste Management – Facility Maintenance and Renovation. The project has generated the following waste as part of their Facility Maintenance and Renovation activities: 2,000 lbs. (907.2 kg) of steel, 900 lbs. (408.2 kg) of carpet, 1,100 lbs. (498.9 kg) of wood, and 1,500 lbs. (680.4 kg) of wallboard.
If the project has diverted 1,800 lbs. (816.4 kg) of steel, 900 lbs. (408.2 kg) of carpet, 1,000 lbs. (453.6 kg) of wood, and 250 lbs. (113.3 kg) of wallboard, what is the actual diversion rate achieved?
- A . 70.4% of diversion
- B . 71.8% of diversion
- C . 75.7% of diversion
- D . 82.3% of diversion
A manufacturing plant is increasing units produced and the number of employees annually. The building is documenting compliance with Energy and Atmosphere Prerequisite, Minimum Energy Performance, Case 2, Option 1. Path 2 Benchmark Against Typical Buildings Using Comparables.
Which of the following should be used to normalize the building’s energy use?
- A . Relative production
- B . Number of parking spaces
- C . Gal. (I) of water used
- D . Area (ft2 or m2)
Which of the following is considered an ongoing purchase for the purpose of calculating Materials and Resources Credit, Solid Waste Management – Ongoing?
- A . Office chairs
- B . Mercury-containing lamps
- C . Shelving units
- D . Toner cartridges
Which of the following strategies reduces the impact of materials used in building operation and maintenance on indoor air quality?
- A . Install VOC sensors
- B . Document all emissions
- C . Use products with low emissions
- D . Comply with ASHRAE 55-2010
Landscape irrigation practices consume large quantities of potable water. By evaluating the project’s outdoor water budget and irrigation water demand early in the Establishment Period in Water Efficiency Credit, Outdoor Water Use Reduction project teams will be able to
- A . earn Water Efficiency Credit, Water Metering
- B . earn Sustainable Sites Credit, Rainwater Management
- C . determine water use in landscape designs
- D . determine water use in outdoor fountains and pools
The project team has been directed by the building owner to only pursue practices that directly improve the actual building performance.
Which of the following would be the lowest cost option?
- A . Install a new high-efficiency chiller
- B . Purchase renewable energy credits
- C . Install new high efficiency urinal flush valves
- D . Provide financial support for off-site conservation
A district energy system provides chilled and hot water to a building on a campus.
What equipment must be commissioned to meet the requirements of Energy and Atmosphere Credit, Existing Building Commissioning – Analysis, Option 1. Existing Building Commissioning?
- A . Heat exchangers
- B . Central plant chillers
- C . Primary chilled water pump
- D . Central plant cooling tower
Which of the following products qualifies under Materials and Resources Credit, Purchasing – Ongoing?
- A . A product labeled Sustainable Sourced
- B . An organic product produced within a 500 mi. (805 km) radius
- C . A United States Department of Agriculture (USDA) organic food product
- D . A Protected Harvest certified product purchased outside the performance period
Latest LEED AP O+M Dumps Valid Version with 166 Q&As
Latest And Valid Q&A | Instant Download | Once Fail, Full Refund
