HPE6-A43 Online Training Archives

According to the research of the past exams and answers, Exam4Training provide you the latest HP HPE6-A43 Implementing Aruba Location Services Online Training, which have have a very close similarity with real exam. Exam4Training can promise that you can 100% pass your first time to attend HP certification HPE6-A43 exam.Through Exam4Training you can get the latest HP HPE6-A43 Implementing Aruba Location Services Online Training. Please purchase it earlier, it can help you pass your Implementing Aruba Location Services exam in the first time to participate in the HP ACEAP HPE6-A43 exam.

Page 1 of 5

1. How is ALE licensed?

one enterprise license per controller

one license per user

one license per AP

one license per server

2. What is required for OAuth2 integration between the Meridian Editor and ClearPass? (Select two.)

The ClearPass Server must have a public IP address.

The ClearPass Server must have a public certificate.

The Meridian Editor must have a public certificate.

The ClearPass Server must be configured to send authentication requests to the Meridian Editor.

ClearPass must have COA (Change of Authorization) enabled.

3. An app developer tests a campaign to ensure it triggers and provides a notification to the iPhone. The notification appears once on the device. The developer continues to test and 10 minutes later the developer tries to trigger the campaign to send the notification again to the device. The notification is not received on the device.

What does the developer need to do to make the campaign trigger and send another notification? (Select two.)

Reset the campaign in the Beacons Apps.

Reset the campaign in the Meridian Editor.

Reset the beacon with the Beacons Apps.

Set the campaign as ready in the Meridian Editor.

Bring the device within range of the proximity beacons.

4. A network engineer plans an Aruba BLE beacons deployment for an airport to provide location and proximity for the airport’s app.

What does the engineer need to consider about Aruba BLE beacons?

They enable blue dot on iOS and Android AppMaker venue apps.

They require GPS-enabled devices to configure beacons with the Beacons App.

They require iOS 4.01 or later to configure beacons with the Beacons App.

They use Wi-Fi APs and controllers for location and notifications.

5. ALE can provide information about which type of connections? (Select two.)

only clients that run the Venue App

associated clients

unassociated clients

only clients that run the Beacons App.

6. Which page type was selected in AppMaker to produce the page shown in the exhibit?

Web Page

List

Slide Show

Tabbed View

7. An app developer tests a campaign to ensure it triggers and provides a notification to a mobile device. The notification appears ones on the device and now the campaign shows a status of inactive.

What does the developer need to do to make the campaign trigger and send another notification?

Reset the campaign in the Beacons Apps.

Reset the beacon with the Beacons Apps.

Reset the campaign in the Meridian Editor.

Bring the device within range of the location beacon.

8. Which statement is correct about the power level of Aruba Beacons?

The power level can be changed on a location beacon and a USB beacon, but not on a proximity beacon.

The power level of a proximity beacon can be changed, but the power level of a location beacon cannot be changed.

The power level can be changed for all Aruba Beacon modes and will determine coverage area.

The power level cannot be changed on either a location or a proximity beacon, but can be changed on an Aruba Sensor and a USB beacon.

9. A network engineer plans a beacon deployment with Aruba blue dot location-based services. The deployment uses both battery-powered and USB beacons.

What is a primary difference between battery-powered beacons and USB beacons that is useful for the engineer to know for this deployment?

USB beacons do not need to be connected to a power source, but buttery-powered beacons do.

Battery-powered beacons do not need to be connected to an external power source, but USB beacons do.

Battery-powered beacons can be configured as location beacons. But USB beacons cannot.

USB beacons can be remotely managed, but buttery-powered beacons cannot.

10. Which changes are made in an AppMaker app when a color is selected in the Theme menu? (Select two.)

background color

top title bar color

event page color

featured page logo color

bottom Search bar color

Page 2 of 5

11. Which pieces of information are needed by the Aruba Meridian team to begin to publish an AppMaker app? (Select two.)

artwork guidelines

metadata about the app

placemarks

number of beacons

pages and events

12. A network engineer uses AppMaker to create a Meridian-powered app.

Which items can be created within AppMaker?

beacons placement

proximity beacons

campaigns

analytics

maps and placemarks

13. How can an app developer configure campaigns to deliver notifications only on Monday and Tuesday?

Configure the broadcast type as scheduled, and set the recurring schedule date and time.

Configure the broadcast type as always, and set the from and to dates.

Configure the broadcast type as scheduled, and set the from and to dates.

Configure the broadcast type as always.

14. A network engineer wants to enable remote beacon management so that an Aruba AP can manage battery-powered beacons.

Which device can be plugged into an Aruba AP to enable this management?

sensor

battery-powered beacon

USB beacon

USB Wi-Fi adapter

15. What is the minimum battery life of an Aruba battery-powered beacon?

1 month

6 months

1 year

4 years

16. A Meridian app developer troubleshoots push notifications that fail to appear on a mobile device.

What should the developer check on the device to troubleshoot the push notifications issue? (Select two.)

if the Meridian-powered app is installed on the device

if Wi-Fi is enabled on the device

if GPS location is enabled on the device

if location services is enabled for the app

if the Wi-Fi guest WLAN is connected

17. A network engineer is troubleshooting the jumpiness of a blue dot in a location-enabled Meridian-powered app. The network engineer determines that it is located in a reflective physical environment.

Which deployment model will perform better in this environment?

Area

Multipath

Path

Reflective

18. An app developer wants to create a new page to list events for venue’s app. The app developer wants the events to be searchable within the venue’s app.

What can be used to accomplish these goals?

Calendars

Events

Categories

Tabbed View pages.

19. Refer to the exhibit.

An app developer wants to create a new page to allow visitors to navigate to other list pages.

Using the menu shown in the exhibit, which page type would be best for this purpose?

Tabbed View

Slideshow

Image+text

List

20. An app developer wants to create a new campaign for a venue app.

What is the first step the developer must take to create the campaign?

Click on the proximity beacon on the map and associate it to a campaign.

Create a title for the campaign in the Meridian Editor.

Configure a proximity beacon for the campaign with the Beacons App.

Create a name for the campaign with the Beacons App.

Page 3 of 5

21. What are the purposes of a node in Meridian routing? (Select two.)

to indicate the exit from a building

to add a placemark to a route

to determine the preferred route

to add portals connecting different floors

to mark the start and end of a route

22. A network engineer plans an ALE deployment for a customer.

Which ALE integration requirements should the network engineer consider? (Select two.)

ALE requires AirWave to gather analytics.

ALE integrates with 3rd party analytics software

ALE uses Bluetooth to collect positioning information

ALE deployments require a wireless infrastructure

ALE deployments require an Aruba controller or Instant IP

23. A customer has an office where they would like to install beacons for location for a Meridian-powered app. The ceilings in the office building are 30 feet (9.1 meter) high with no ceiling grid. The office does not have a drop ceiling.

Where should the beacon installer place the beacons?

floor

wall

ceiling

under the floor

24. An app developer wants to add the venue’s logo to the top of the featured page for an app.

Where in AppMaker should the developer add the logo?

Theme

Pages

Featured

Info

25. Which analytics tool uses Wi-Fi connections to gather information about clients, such as associations and unassociated clients?

Aruba Beacons app

ALE

AirWave

Aruba Sensor

26. A network engineer troubleshoots an ALE server and tries to identify the client information in ALE.

What does ALE interact with to gather client information? (Select three.)

BLE Beacons

AirWave

Aruba Instant

Aruba Controller

Meridian editor

27. Which type of app requires users to enter a starting point and destination to receive turn-by-turn directions?

non-location aware

location aware

beacons enabled

SDK

28. A network engineer wants to access the Meridian Editor to make changes to a Meridian-powered app.

Which address should the engineer type into the web browser?

Meridian.com

edit.meridianapps.com

arubanetworks.com/meridian

Meridian.arubanetworks.com

29. An app developer wants to change the layout of pages in a Meridian-powered app.

Which setting in AppMaker should the app developer modify to change the page layout?

Page format

Page style

Page layout

Page type

30. An app developer wants a campaign to trigger and send a notification to a device only during certain times of the day.

To configure this, where should the developer set the schedule for the campaign?

in the mobile device profile

in the Beacons App

in the Meridian Editor

in the venue app

Page 4 of 5

31. A network engineer plans to deploy proximity beacons for a venue.

What is helpful for the network engineer to know about these beacons?

They are used for blue dot location tracking on a mobile device

Their power level is configurable to enable blue dot on a mobile device

They are associated with a placemark for push notifications on mobile devices

They are used to enable push notifications on mobile devices

32. The Beacons App can run on which type of device?

iPod touch 5thgeneration

iOS 6 device

Android device

iPAD 5.0+ device

33. An app developer designs a Meridian-powered app with Aruba location-based services. The app developer wants an initial map of the venue added for the app.

How does the initial map get added?

The Aruba Meridian team adds the initial map in AppMaker

The Aruba Meridian team adds the initial map in the Beacons App

The app developer adds the initial map in AppMaker

The app developer adds the initial map in the Venue app

34. What affects the distance at which notifications are triggered?

the type of proximity beacon

when the campaign was last reset

the power level of the location beacon

architectural and environmental factors

35. A customer plans to deploy beacon management for their Aruba mobile engagement solution. The customer has five beacons in the store used for proximity push notifications, all of which are located within a 5,000 square foot (464.52 square meter) area. The store has a total of 50,000 square feet (4,645.15 square meters). The customer plans to purchase AP-325s to fulfill the beacon management requirements.

How many AP-325s will the customer need to purchase?

36. How is ALE installed?

as a Linux server

as a Virtual Machine (VM)

as a hardware appliance

as a plug-in to the Meridian Editor

37. Which Aruba controller model supports beacon management?

7005 controller with AOS 6.3.1

7010 controller with AOS 6.4.1

7210 controller with AOS 6.3.3

7220 controller with AOS 6.4.3

38. Which page type is used to combine references and organize other AppMaker pages?

Calendar

Image+text

Web page

List

39. Refer to the exhibit.

Which message displays on the device when the campaign shown in the exhibit is triggered?

Hotel Special: Test 2

Test 2

Hotel Special

Message Test 2

40. Where can an app developer configure and reset campaigns?

Campaigns can be configured and reset in the Meridian Editor.

Campaigns can be configured and reset in the Meridian Editor and configured in the Beacons App.

Campaigns can be configured in the Meridian Editor and reset in the Beacon Apps.

Campaigns can be configured and reset in the Beacon Apps.

Page 5 of 5

41. What is the main use of ALE?

to create a mobile device app

to provide location analytics from Wi-Fi information

to interact with AirWave to provide RF heatmaps

to gather location analytics from beacons

42. DRAG DROP

Place the steps to complete a location walkthrough in the correct order.

43. An app developer troubleshoots a campaign and finds that the campaign is inactive in the Beacons App.

Which tool can the app developer use to set the campaign to active?

Beacons App

AppMaker

AppViewer

Meridian Editor

44. Campaigns can be tied to which beacons types?

placed location beacon

placed proximity beacon

unplaced location beacon

unplaced proximity beacon

45. What is the purpose of a service on ClearPass?

to define what to do with incoming authentication requests

to indicate were to send the authentication request

to define the role to apply to an authenticated user

to pass authentication information to ClearPass

46. Which app can be used to move a beacon on a map?

AppViewer

AppMaker

Beacons App

any Meridian app

47. A WLAN engineer needs to design a remote beacon management solution to support firmware updates to Aruba Beacons. The WLAN engineer tries to determine the correct beacon type for the deployment.

What is accurate and useful information to help with this determination? (Select two.)

AP-325s have a built-in Bluetooth radio to enable remote Beacon management.

USB beacons have only WLAN radios, to be used for both location and remote beacon management.

Battery-powered beacons use the built-in Wi-Fi radio to enable remote beacon management.

USB-enabled APs use the controller network infrastructure to upload beacon management data to the Meridian Editor.

Battery-powered beacons have both Bluetooth and Wi-Fi radios for remote beacon management.

48. In which type of app does a blue dot appear on the map on a device?

GPS-enabled app

AppMaker location-enabled app

Meridian Editor

self-guided wayfinding

49. A retail customer does not have an Aruba location services deployment but has an existing Aruba Wi-Fi network with an Aruba 7210 controller with AP-205. The customer has identified six locations around its retail store were they would like to implement campaign push notifications. The customer also requires beacon management.

Which product mix is most suitable for this customer to achieve the goals of proximity push notifications as well as beacon management?

six AP-215s and six battery-powered beacons

six AP-325s

six AP-275s and six USB management beacons

six battery-powered beacons

50. Which Meridian Editor report reveals how many visitors use a Meridian-powered app?

Screen interactions

Total Activity

Visitor interactions

Directions