HPE2-Z40 Online Training Archives

For passing the HP HPE2-Z40 exam you must have to take help from valuable HP HPE2-Z40 Delta – Applying Aruba Switching Fundamentals for Mobility Online Training available at Exam4Training. The benefits of these HP HPE2-Z40 Delta – Applying Aruba Switching Fundamentals for Mobility Online Training are numerous because they help you in a professional way. I can recommend everyone a site where you can download and read recent study dumps in PDF and VCE document. Exam4Training is providing original questions of Aruba Certified Switching Associate (ACSA) HPE2-Z40 exam.

Page 1 of 2

1. What is one requirement to combine Aruba 5400R zl2 Series switches in a Virtual Switching Framework (VSF) fabric?

Both of the members must have two management modules.

The switches must operate in v3-module only mode; any modules of an earlier version are automatically disabled.

The interfaces assigned to the VSF link must be pre-configured as part of a link aggregation.

One of the switches must be an Aruba 5412R switch, while the other member can be any switch in the 5400R series.

2. A network administrator wants to apply a critical PoE priority to any ArubaOS switch port that connects to an Aruba AP. The priority should be applied dynamically based on LLDP messages received from the AP Which step should the administrator take to meet this goal?

Configure the PoE usage setting on all ports as //dp.

Configure the PoE usage setting on all ports as class and make sure that Aruba APs are defined as Class 4 devices.

Enable the default AP profile bound to the Aruba AP device type.

Enable LLDP MED TLV extensions on the switch port.

3. Which solution provides firmware update automation for Aruba APs and switches?

Aruba ClearPass

Aruba Virtual Switching Framework (VSF)

Aruba Activate

Aruba AirWave

4. Refer to the exhibit.

The exhibit shows settings for a WLAN on an Aruba Instant cluster To which VLAN is wireless user traffic assigned?

to the untagged VLAN on switch ports connected to the Instant APs

to the VLAN defined for wireless users in Aruba AirWave

to the default VLAN defined in the System settings in the Instant

to the default VLAN on switches connected to the Instant APs

5. Which settings are required on ArubaOS switches for Aruba AirWave to discover monitor, and manage them?

shared cluster key and an SNMP v2 community or v3 user

SNMP v2 community or v3 user and an HTTPS certificate

credentials for Telnet or SSH login and an SNMP v2 community or v3 user

credentials for Telnet or SSH login and an HTTPS certificate

6. A network administrator connects several newAruba Instant APs (at factory defaults) to a switch. After waiting several minutes for the cluster to form, the administrator is ready to provision the cluster. The VLAN on the ports connected to the APs has no DHCP services.

How can the administrator contact the Instant UI and provision the APs with static IP addresses?

Connect to the Instant SSID and open a Web browser.

Access the default IP address, 192.168.1.1, from a device connected in the AP VLA

Access the cluster using Aruba Activate.

Access https://vc.arubanetworks.com from a device connected in the AP VLA

7. A network administrator needs to reach an ArubaOS switch CU at a management IP address The administrator also needs to ensure that the switch entirely rejects Telnet and SSH connections from users in data VLANs. How can the administrator meet these goals?

Configure the management IP address on the default VLAN and set a manager password.

Configure the management IP address on a VTY interface and bind an ACL to this interface.

Configure the management IP address on any VLAN except the default VLA

Set a manager and operator password .

Configure the management IP address on the OOBM port and configure the switch to listen for Telnet and SSH only on this port.

8. Which devices must support Multi-User Multiple Input Multiple Output (ML) MIMO) in order for an AP to transmit to multiple clients simultaneously?

all of the APs in a WLAN, but none of the clients

the transmitting AP and at least one of the clients that receives simultaneous transmissions

the transmitting AP and all of the clients

the transmitting AP and all of the clients that receive simultaneous transmissions

9. Refer to the exhibit.

The exhibit shows the physical connection between two Aruba 5400R switches and a server The network administrator is concerned about redundancy and wants to implement a solution like that shown on the right side of the exhibit. The administrator plans to use an LACP link aggregation with both links active.

What must the administrator do first?

Configure an LACP link aggregation between the switches.

Enable dynamic link aggregation globally on the switches.

Combine the switches into a Virtual Switching Framework (VSF) fabric.

Configure the same operational key on both the switches.

10. What do all devices in the same AirWave folder have in common?

They share firmware auditing settings.

They are viewed together in the APs/Devices page

They share a configuration template.

They have the same monitoring settings, such as polling settings.

Page 2 of 2

11. A network administrator wants to form a cluster with several Aruba Instant APs (IAPs). What must the administrator verify?

that all APs are pre-configured with WLANs with the same SSID

that all APs are operating on the same radio channel

that all APs are the same model

that all APs are connected in the same subnet

12. A network administrator needs to configure Virtual Switching Framework (VSF) for the first time on an ArubaOS switch The administrator enters this command:

Switch-1(config)# vsf member 1 link 1 a23, a24

The administrator then wants to provision member 2 settings. What must the administrator do before provisioning these settings?

Configure SNMP settings that match settings configured on member 2.

Enable VSF on the switch and reboot.

Join member 2 to the VSF fabric.

Specify the model type for member l.

13. Refer to the exhibit.

Which type of link aggregation should the network administrator configure on interfaces 1/A1 and 2/A1?

a protocol-less trunk

an LACP distributed trunk

a distributed trunk

a static LACP link aggregation

14. Refer to the exhibits.

A broadcast packet arrives tagged for VLAN 2 on the Member 2 link of Trk2.

What does Member 2 do?

It forwards the packet over the VSF link to Member 1. and then Member 1 forwards the packet on its link in Trk1.

It uses LACP to communicate with the commander on the VSF link, and then follows the commander directions.

It uses a hash to select one of the links in Trk1, and then forwards the packet locally or on the VSF link, based on the decision.

It forwards the packet on its local link in Trk1.

15. A network has ArubaOS switches and an Aruba Instant cluster with IP addresses on 10.1.255.0/24. The network administrator wants to manage the devices in Aruba Airwave. The administrator uses the SNMP credentials configured on the switches to create a scan set for 10.1.255.0/24. The scan discovers the switches but not the Instant cluster.

What should the administrator do to discover the cluster in Airwave?

Configure SNMP credentials in the Instant U

Re-configure the scan set to use the Aruba Instant default SNMPv3 user, admin.

Specify the AirWave IP address in the Instant UI System> Admin settings.

Install the Instant cluster self-signed certificate on Airwave.

16. A company has a cluster of Aruba Instant APs (IAPs). The company wants to add a new IAP to the cluster.

What should network administrators ensure before they connect the new IAP?

that the DHCP server has the correct options 60 and 43

that the new IAP has been provisioned with an IP address and the IP address of the cluster virtual controller (VC)

that Aruba Activate is configured with provisioning rules for the IAP

that the switch port for the AP is untagged for the same VLAN as the current cluster

17. Network administrators manage ArubaOS switches through the CU. What is one prerequisite to enable transfers of completely encrypted config files?

Enable the include-credentials option .

Install a CA-signed certificate on the switch.

Enable TFTP

Set up SS