HPE0-S54 Online Training Archives

For the examinees who are the first time to participate HP HPE0-S54 exam, choosing a good pertinent training program is very necessary. Exam4Training can offer a specific training program for many examinees participating in Designing HPE Server Solutions exam. Our HP HPE0-S54 Designing HPE Server Solutions Online Training includes simulation test before the formal examination, specific training course and the current HPE ASE HPE0-S54 exam which has 95% similarity with the real exam. Please add Exam4Training to you shopping car quickly.

Page 1 of 3

1. While installing a three frame Synergy solution, only two of the frames are identified during the discovery process.

What should you do to get resolution?

Remove and re-insert the standby Composer

Issue a refresh command to the enclosure

Open the front panel of the Composer, and read the error message

Validate Frame Link Module topology

2. What is required to enable Jitter Smoothing technology? (Choose two.)

HPE Apollo

ProLiant Gen 10

HPE Synergy

HPE Cloudline

iLO5 Advanced

3. A customer is using HPE Smart Update Manager (SUM) for firmware update. They plan to add 100 Gen10 ProLiant servers, and they are concerned about whether HPE SUM will be able to support this size of installation.

What other option could the customer use for firmware updates that has increased scalability?

iLO Advanced Premium Security Edition

Insight Control server provisioning

Insight Cluster Management Utility

iLO Amplifier Pack

4. A customer purchased HPE ProLiant Gen10 servers. The customer is transitioning from a physical to a virtual environment.

Which feature should be enabled to ensure that they get the optimal performance from their new servers?

UEFI optimized boot

Integration with an HPE OneView for VMware vCenter

Performance optimization using the workload profiles

OneView OS Build Plan

5. You want to form a Synergy management ring.

Which component is required?

HPE Synergy Image Streamer

HPE Synergy Frame Link Module

HPE Synergy Composer

HPE Synergy 10 Gb Interconnect Link Module

6. You need to demonstrate the runtime firmware verification scan functionality on a ProLiant DL380 Gen10 server. You find that the option is not available in the UEFI interface.

What is the most likely cause of the problem?

The server boot mode is set to UEFI

The Onboard Administrator has not been initialized

The file firmware-ilo5-1.10.1.1.x86_64.rpm is the incorrect version

The required iLO license has not been installed

7. What is a benefit of NVMe technology?

optimized SMB workloads

minimized network bandwidth

lower application costs

low latency data access

8. A c7000 customer wants to expand their server environment. You want to encourage them to move to Synergy to prepare them for the future.

Which question should you ask?

Is there a requirement for enhanced security on the management network?

Do they want to maximize the memory footprint of their servers?

Does their application workload benefit from persistent memory?

Are they planning to purchase ProLiant Gen10 servers as part of the project?

9. Your customer is interested in Synergy and composable infrastructure. They are concerned that operational savings may not meet expectations since operating system installation consumes a great deal of time.

Which feature should you highlight to overcome the objection?

The Synergy Composer provides HTTPS boot services

The Synergy Frame Link modules provide PIXE operating boot partitions

The Synergy Composer can provision operating systems in seconds

The Synergy Image Streamer can provision operating systems in seconds

10. A customer plans to expand in the future to an HPE Synergy installation with SAS connectivity.

What should you explain to the customer regarding SAS connectivity?

External storage devices can be connected to the SAS Synergy switches only if they were installed prior Composer configuration

SAS connectivity will require additional licenses

It will be not possible to add SAS connectivity to the existing environment if the logical enclosure is configured

SAS connectivity is supported only in the first fabric, so it should not be used for any other connections

Page 2 of 3

11. You have a customer who has thousands of ProLiant servers spanning Gen8, Gen9, and Gen10 across multiple server models (Rack, Tower, Blade, Apollo), all licensed with iLO Advanced. The customer needs an effective way to inventory and update the firmware across the environment.

Which tool should you recommend?

iLO Amplifier Pack

OneView

Intelligent Provisioning

SUM (System Update Manager)

12. Refer to the exhibit.

You are installing three Synergy frames for a customer PoC in the configuration shown. The composer is unable to discover the frames.

What is the most likely cause of the problem?

Another composer is needed Frame 3

Composer 2 is in the wrong frame

The management network should be connected to the top and bottom frames

The management ring should be connected using the FLM link ports

13. A customer has 10 HPE BladeSystem enclosures managed by HPE OneView. They want to add three HPE Synergy frames.

What is a proper procedure to manage a new HPE Synergy installation?

Use HPE Composer for HPE Synergy frames management

Deploy HPE Global Dashboard for HPE Synergy management

Add all frames to the existing HPE OneView appliance

Deploy a dedicated HPE OneView appliance for HPE Synergy frames

14. A customer needs a VDI solution. The amount of compute per U of rack space will be a key point in their solution selection.

Which HPE product would be an ideal solution as part of your RFP response?

HPE Apollo 4510 Gen10

HPE Apollo 4200 Gen9

HPE SY480 Gen10

HPE DL580 Gen10

15. What are features of the HPE Synergy Planning Tool? (Choose two.)

It creates a REST configuration file based on configuration created

It recommends the best top-of-rack switch

It provides estimated power consumption and weights of the solution

It runs on the Partner Ready Portal

It aids configuration of rack, Frames, compute, storage, fabric and power

16. A customer needs a Synergy Proof of Concept (PoC) using Image Streamer.

What is the minimum number of Synergy frames needed for this PoC?

17. A customer has a ProLiant DL based Gen10 server solution hosting an I/O intensive 2TB database. The customer needs to dramatically increase the performance of their existing system.

Which solution will provide the maximum performance possible for their application?

Install HPE Scalable Persistent Memory

Move the OS to an

2 SSD drive

Upgrade the current processor to a Xeon-Platinum

Install DD4 Smart Memory

18. A customer received their three frame Synergy system. However, they are missing a link cable that connects the frame link module between the frames.

Which type of cable do they need?

DAC

MPO

CAT6A

AOC

19. A customer needs a solution to support Online Transaction Processing (OLTP) and database workloads.

Which Gen10 technology would optimize the environment for the customer?

REST API

Silicon Root of Trust

workload profiles

OneView

20. DRAG DROP

Match each Synergy component with the description of the functionality it provides.

Page 3 of 3

21. A customer recently purchased HPE ProLiant Gen10 servers, but finds that their application does not appear to benefit from the newest Xeon processors.

Which features should be configured in the BIOS to overcome the issue?

Server Profile Templates

iLO CNSA Mode

Workload Profiles

High Precision Event Timer

22. A financial customer has a remote office that requires a significant amount of computing resources, but has no local IT staff. They need simple and affordable management and disaster recovery of their site.

Which solution should you recommend to meet this customer’s needs?

HPE ConvergedSystem 300

HPE SimpliVity 380

HPE StoreOnce 5100

HPE Serviceguard for Linux

23. A customer is installing multiple racks of DL380 Gen10 servers in a datacenter. They need to configure each one with identical BIOS settings.

Which tools are available to solve the situation? (Choose two.)

HPE Active Health System

HPE Smart Update Manager

HPE OneView

HPE ICsp

HPE Intelligent Provisioning

24. Your customer has completed a successful Synergy Proof of Concept (PoC) consisting of a single frame with dual composers and dual Virtual Connect SE 40Gb F8 modules.

The customer wants to:

- add a second frame before they move into production

- have unified management

- have a separate logical enclosure for each frame

What are the basic steps to add the second frame? (Choose three.)

Move the standby composer to the second frame.

Disconnect the existing management ring, and then cable the FLM (frame link module) in the first frame to the FLMs in the second frame.

Install a satellite module in the first frame.

Move the bottom VC module from the first frame to the second.

Move one of the uplinks from the FLM in the first frame to a FLM in the second.

25. A customer wants to implement a large Microsoft Storage Spaces Direct environment.

Which protocol should the customer use?

VXLAN

RDMA

OSPF

NVGRE

26. An environmentally sensitive customer has a data center that operates with fresh air cooling.

Which feature of HPE ProLiant Gen10 servers makes them suitable to operate in this environment?

HPE 1600W Flex Slot Platinum Hot Plug Low Halogen Power Supply Support

Intel® Xeon-Platinum 8180M Support

ASHRAE A4 compliance

ACPI 6.1 Compliance

27. Your customer is building out their own object-based storage solution. They initially developed the object store using DL380 Gen9 servers but are now looking for a solution that is purpose built to provide the additional storage.

Which solution should you recommend?

DL580 Gen10

Apollo 4510 Gen10

ML350 Gen10

DL560 Gen10

28. Which iLO 5 feature allows a customer to directly, physically connect to a ProLiant server to troubleshoot issues?

iLO Federation

iLO Amplifier Pack

iLO mobile app

iLO Service Port

29. A customer needs a new high frequency trading cluster. Their current cluster has non-deterministic performance and undesirable latency. Because high frequency trades are extremely time-sensitive transactions, the customer cannot tolerate the microseconds of delay that can randomly occur on their current cluster.

Which iLO 5 Gen 10 feature can you propose to address this technical requirement?

Turbo Cores

Jitter Smoothing

Persistent Memory

NVMe Drives

30. During a presentation on Synergy fabric technology, a customer states that they would not purchase Virtual Connect modules because they would be paying for Fibre Channel technology that they have no intention of using.

How should you handle this objection?

Explain to the customer that the only Fibre Channel support is through FCoE and does not add to the module cost.

Explain to the customer that HPE does not pass on the cost of including Fibre Channel support to the customer.

Inform the customer that native Fibre Channel support is an optional, licensed feature.

Inform the customer that native Fibre Channel support is provided through an optional daughterboard.