- All Exams Instant Download
In the process of generating the fast forwarding table, the five-tuple refers to ________.
In the process of generating the fast forwarding table, the five-tuple refers to ________.A . Source MAC address, destination MAC address, protocol number, source IP address, destination IP address B. Physical interface, MAC address, IP address, port number, protocol number C. Source IP address, destination IP address, source port number,...
In the topology shown in the figure, perform the following configurations on RTA, RTB, RTC, and RTD respectively:
In the topology shown in the figure, perform the following configurations on RTA, RTB, RTC, and RTD respectively: RTA] ospf 1 router-id 1.1.1.1 RTA-ospf-1] area 0 RTA-ospf-1-area-0.0.0.0] network 192.168.1.0 0.0.0.255 RTA-ospf-1-area-0.0.0.0] network 1.1.1.1 0.0.0.0 RTB] ospf 1 router-id 2.2.2.2 RTB-ospf-1] area 0 RTB-ospf-1-area-0.0.0.0] network 192.168.1.0 0.0.0.255 RTB-ospf-1-area-0.0.0.0] network 2.2.2.2 0.0.0.0...
In the network shown in the figure, dynamic routing protocols are not enabled between all routers, and only static routing can be configured.
In the network shown in the figure, dynamic routing protocols are not enabled between all routers, and only static routing can be configured. Then the correct configuration on the RTE should be _________.A . ip route-static 10.0.0.0 255.255.254.0 S1/0 B. ip route-static 10.0.0.0 255.255.254.0 S2/0 C. ip route-static 10.0.0.0 255.255.252.0...
Which of the following options are possible at this time?
As shown in the figure, the MSR router in the headquarters is connected to the branch through the Ethernet interface E1/0, and the connection is backed up through the ISDN network. Which of the following options are possible at this time? (Multiple choice)A . The RIP protocol runs on the...
The administrator wants to configure the RIP routing priority value to be 60 on the MSR router. Which of the following commands is correct?
The administrator wants to configure the RIP routing priority value to be 60 on the MSR router. Which of the following commands is correct?A . Router] rip preference 60 B. Router] preference 60 C. Router-rip-1] rip preference 60 D. Router-rip-1] preference 60View AnswerAnswer: D
Which of the following measures can improve the scalability of the network?
In a certain network project, the client requires the network to have good scalability considering that the network users may increase significantly in the future. Which of the following measures can improve the scalability of the network?A . Use VLSM to divide IP addresses B. Use the RIP protocol as...
To implement packet-based load balancing on the outbound interface of an MSR router, which of the following configurations are required?
As shown in the figure, a LAN uses an MSR router to connect to an ISP. To implement packet-based load balancing on the outbound interface of an MSR router, which of the following configurations are required?A . MSR-Ethernet1/1] ip fast-forwarding inbound MSR-Ethernet1/2] ip fast-forwarding inbound B. MSR-Ethernet1/1] ip fast-forwarding outbound...
XZ company requires to build its network according to the modular enterprise network architecture. XZ company has 1 research and development base in Shenzhen and Xi'an; one office building in Beijing and Shanghai; offices with more than 50 people in 23 provincial capital cities; small offices with no more than 8 people in 200 small and medium cities; There are usually more than 200 marketing and technical personnel on business trips at any time, and some of them are often located in areas lacking Internet access and can only dial-up to the headquarters through the telephone network. Due to environmental and cost issues, some offices do not have access to headquarters via leased lines or PSWAN connections. According to these circumstances, the network module that XZ company should have ________.(Multiple choice)
XZ company requires to build its network according to the modular enterprise network architecture. XZ company has 1 research and development base in Shenzhen and Xi'an; one office building in Beijing and Shanghai; offices with more than 50 people in 23 provincial capital cities; small offices with no more than...
Now it is required that the RTC must not learn the routes configured in the above RTA, what configurations can be performed on the router?
In the topology shown in the figure, perform the following configurations on RTA and RTB respectively RTA-ospf-1-area-0.0.0.1] network 192.168.0.0 0.0.0.255 RTA-ospf-1-area-0.0.0.1] network 192.168.1.0 0.0.0.255 RTA-ospf-1-area-0.0.0.1] network 192.168.2.0 0.0.0.255 RTA-ospf-1-area-0.0.0.1] network 192.168.3.0 0.0.0.255 RTA-ospf-1-area-0.0.0.1] network 192.168.4.0 0.0.0.255 Now it is required that the RTC must not learn the routes configured in...
In H3C equipment, the default priority value of RIP protocol routing is ________.
In H3C equipment, the default priority value of RIP protocol routing is ________.A . 10 B.100 C.150 D. 255View AnswerAnswer: B
