Tag - FORKLIFT exam

The lift truck operator should check that the machine is in a safe condition:A . at periodic intervals during the week.B . immediately after refueling the machine.C . at the start of the day or shift whichever comes first.View AnswerAnswer: C

When using hydraulic controls, which of the following control(s) of the machine should be used?A . The inching pedal.B . The parking brake and neutral gear.C . The inching and foot brake pedals.View AnswerAnswer: B

The ideal way to pick up a pallet is:A . as far forward as possible so that the forks do not protrude at the front.B . with the wider face of the pallet up against the forks.C . with the narrow face of the pallet up against the forks.View AnswerAnswer:...

Which of the following would best improve an organization’ s system of limiting data use?A . Implementing digital rights management technology.B . Confirming implied consent for any secondary use of data.C . Applying audit trails to resources to monitor company personnel.D . Instituting a system of user authentication for company...

If a fault develops on the machine during operation, operators should:A . park the machine and report the fault immediately to the manager/supervisor.B . report the fault to the manager/supervisor at the next convenient time.C . wait until the end of the shift before reporting the fault to avoid any...

Training on one type of vehicle:A . qualifies the operator for that type of vehicle.B . is sufficient for all company forklifts.C . should be done every three years.D . should be done every five years.View AnswerAnswer: A

When leaving the machine, the key should be switched off and removed. This is:A . to ensure the machine’s power has been switched off.B . to prevent the machine from moving.C . to prevent unauthorized persons from using the machine.View AnswerAnswer: C

What is the first thing to do before driving into a trailer?A . Check that the rear wheels have been chocked.B . Raise the forks high enough to clear the dock plate.C . Turn on available lighting.View AnswerAnswer: A

In order to lift a laden pallet safely the fork width should be adjusted so that:A . the forks are close together and central.B . the forks are spread as far apart as possible.C . the forks are spread so there is an equal weight on each fork arm.View AnswerAnswer:...

An unladen lift truck should have its forks pointing down a gradient. This is to improve:A . visibility and steering.B . stability, traction and braking.C . steering and reduce tyre wear.View AnswerAnswer: B