- All Exams Instant Download
How does the customer ensure reachability to ITSP, so that if one device on ITSP fails, the calls will be routed to another device?
A customer is using a SIP trunk to route calls to ITSP to decrease the possibility of downtime, the customer invested in a failover device. How does the customer ensure reachability to ITSP, so that if one device on ITSP fails, the calls will be routed to another device?A ....
To see signaling for media and call setup, which debug must the Administrator turn on?
An administrator is troubleshooting call failures on an H.323 gateway via the CLI. To see signaling for media and call setup, which debug must the Administrator turn on?A . debugB . 323 messagesC . debugD . 224 asn1E . debugF . 246 asn 1G . debugH . 225 media ....
Which configuration change must be made on the gateway to resolve the issue?
An engineer is troubleshooting local ringback on a Cisco SIP gateway The gateway is not ignoring the SIP 180 response with SDP from the service provider, and the far end device is sending the 180 with SDP to play ringback from the IP address specified m the SDP. Which configuration...
Which IOS command creates a SIP-enabled dial peer?
Which IOS command creates a SIP-enabled dial peer?A . voice dial-peer 20 sipB . dial-peer voice 20 voipC . dial-peer voice 20 potsD . dial peer voice 20 sipView AnswerAnswer: B Explanation: Reference: https://www.ciscopress.com/articles/article.asp?p=664148&seqNum=6
Which configuration step is missing?
Refer to the exhibit. ILS has been configured between two hubs using this configuration. The hubs appear to register successfully, but ILS is not functioning as expected . Which configuration step is missing?A . A password has never been set for ILC . Use TLS Certificates must be selected.D ....
How should this be accomplished?
An administrator is asked to configure egress call routing by applying globalization and localization on Cisco UCM . How should this be accomplished?A . Localize the calling and called numbers to PSTN format and globalize the calling and called numbers in the gateway.B . Globalize the calling and called numbers...
What is the cause of the failure?
An engineer has two cisco UCM Clusters and wants to integrate them using ILS with TLS certificates. Cluster A (pub and 1 subscriber) will be the hub, and Cluster B (pub and 1 subscriber) will be the spoke. Both Clusters have self-signed certificates. The engineer has exchanged Publisher A and...
Which command does the engineer use to ensure that the call is reverted to the user after 60 seconds?
An engineer is configuring a call park feature in Cisco Unified Communications Manager Express . Which command does the engineer use to ensure that the call is reverted to the user after 60 seconds?A . R2(config-ephone-dn)#park reservation-group 60B . R2(config-ephone-dn)#park-slot timeout 60 limit 2 recall alternate 3002C . R2(config-ephone-dn)#park reservation-group...
Which configuration should be added to the outgoing dial peer to resolve this issue?
When a third-party SIP Phone System is dialed inbound across a Cisco Unified Border Element, DTMF is failing. The third-party vendor accepts only out-of-band DTMF . Which configuration should be added to the outgoing dial peer to resolve this issue?A . dtmf-relay h245-signalB . dtmf-relay rtp-nteC . dtmf-relay cisco-rtpD ....
As an administrator, what should be configured in the Cisco UCM to accomplish this?
A user requests a feature to send an active call to the mobile phone number on the physical phone. As an administrator, what should be configured in the Cisco UCM to accomplish this?A . A Remote Destination Profile having the same extension as the Mobile phone's number adds the physical...
