Which two command sequences must you configure on switch to establish a Layer 3 EtherChannel with an open-standard protocol? (Choose two)

Which two command sequences must you configure on switch to establish a Layer 3 EtherChannel with an open-standard protocol? (Choose two)A . interface GigabitEthernet0/0/1 channel-group 10 mode onB . interface GigabitEthernet0/0/1 channel-group 10 mode activeC . interface GigabitEthernet0/0/1 channel-group 10 mode autoD . interface port-channel 10 switchport switchport mode trunkE...

March 17, 2025 No Comments READ MORE +

Which function does the range of private IPv4 addresses perform?

Which function does the range of private IPv4 addresses perform?A . allows multiple companies to each use the same addresses without conflictsB . provides a direct connection for hosts from outside of the enterprise networkC . ensures that NAT is not required to reach the internet with private range addressingD...

March 17, 2025 No Comments READ MORE +

Which two encoding methods are supported by REST APIs? (Choose two)

Which two encoding methods are supported by REST APIs? (Choose two)A . YAMLB . JSONC . EBCDICD . SGMLE . XMLView AnswerAnswer: BE Explanation: https://www.cisco.com/c/en/us/td/docs/switches/datacenter/aci/apic/sw/2-x/rest_cfg/2_1_x/b_Cisco_APIC_REST_API_Configuration_Guide/b_Cisco_APIC_REST_API_Configura tion_Guide_chapter_01.html Reference: https://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus1000/sw/5_x/rest_api_config/b_Cisco_N1KV_VMware_REST_API_Config_5x/b_Cisco_N1KV_VMware_REST_API_Config_5x_chapter_010.pdf The Application Policy Infrastructure Controller (APIC) REST API is a programmatic interface that uses REST architecture. The API accepts and returns HTTP...

March 15, 2025 No Comments READ MORE +

Which mode must be used to configure EtherChannel between two switches without using a negotiation protocol?

Which mode must be used to configure EtherChannel between two switches without using a negotiation protocol?A . onB . autoC . activeD . desirableView AnswerAnswer: A Explanation: The Static Persistence (or “on” mode) bundles the links unconditionally and no negotiation protocol is used. In this mode, neither PAgP nor LACP...

March 13, 2025 No Comments READ MORE +

Which command provides this output?

Refer to the exhibit. Which command provides this output?A . show ip routeB . show ip interfaceC . show interfaceD . show cdp neighborView AnswerAnswer: D

March 13, 2025 No Comments READ MORE +

Which 802.11 frame type is association response?

Which 802.11 frame type is association response?A . managementB . protected frameC . controlD . actionView AnswerAnswer: A Explanation: Reference: https://en.wikipedia.org/wiki/802.11_Frame_Types

March 12, 2025 No Comments READ MORE +

What is the default behavior of a Layer 2 switch when a frame with an unknown destination MAC address is received?

What is the default behavior of a Layer 2 switch when a frame with an unknown destination MAC address is received?A . The Layer 2 switch drops the received frameB . The Layer 2 switch floods packets to all ports except the receiving port in the given VLAN.C . The...

March 11, 2025 No Comments READ MORE +

What commands are needed to add a subinterface to Ethernet0/0 on R1 to allow for VLAN 20, with IP address 10.20.20.1/24?

Refer to the exhibit. What commands are needed to add a subinterface to Ethernet0/0 on R1 to allow for VLAN 20, with IP address 10.20.20.1/24?A . R1(config)#interface ethernet0/0 R1(config)#encapsulation dot1q 20 R1(config)#ip address 10.20.20.1 255.255.255.0B . R1(config)#interface ethernet0/0.20 R1(config)#encapsulation dot1q 20 R1(config)#ip address 10.20.20.1 255.255.255.0C . R1(config)#interface ethernet0/0.20 R1(config)#ip address...

March 11, 2025 No Comments READ MORE +

How does Cisco DNA Center gather data from the network?

How does Cisco DNA Center gather data from the network?A . Network devices use different services like SNMP, syslog, and streaming telemetry to send data to the controllerB . Devices establish an IPsec tunnel to exchange data with the controllerC . Devices use the call-home protocol to periodically send data...

March 9, 2025 No Comments READ MORE +

Which two actions are performed by the Weighted Random Early Detection mechanism? (Choose two)

Which two actions are performed by the Weighted Random Early Detection mechanism? (Choose two)A . It drops lower-priority packets before it drops higher-priority packetsB . It can identify different flows with a high level of granularityC . It guarantees the delivery of high-priority packetsD . It can mitigate congestion by...

March 5, 2025 No Comments READ MORE +