Which three of the following actions are native log entry actions? (Choose three.)
- A . add a tag to the log entry
- B . continue rule processing but do not save
- C . halt further rule processing for the log entry
- D . send an email notification
If a NetFlow collector service is showing a “down” status, which two of the following steps are possible troubleshooting options? (Choose two.)
- A . Confirm the database connection is up and server has free resources.
- B . Delete and re-add NetFlow collector service.
- C . Start or restart SolarWinds’ collector service.
- D . Start or restart SolarWinds’ NetFlow service from Orion service manager.
What is the minimum amount of RAM required for setting up log collection in hybrid cloud observability?
- A . 4GB
- B . GB
- C . 16 GB
- D . 32 GB
A universal device poller (UDP) was created on the main polling engine to collect CPU temperature for routers polled by the main polling engine and switches polled by the additional polling engine. It is noted that statistics from the switches are missing.
What is the likely cause of the missing statistics?
- A . routers are not monitored on the additional polling engine
- B . switches are not monitored in the additional polling engine
- C . UDPs are tied to polling engine on which they are hosted
- D . UDPs do not work with additional polling engines
A probe is to be built to test connections to Office 365 from two different locations.
How would this be accomplished?
- A . Create a probe, duplicate it, and change the source agent to the agent in another location.
- B . Create both probes on hybrid cloud observability (HCO) server and designate each location.
- C . Create two probes and assign each to an agent in each location.
- D . Create two probes and assign each to an agent in one location.
Flow data is not generating from a device in the web console. Wireshark was used to confirm the flows are being sent from the device to the poller and not blocked by the firewall.
Why is the data not showing in the web console?
- A . device is not monitored by hybrid cloud observability (HCO) features
- B . device is using IPv6 and HCO only supports IPv4
- C . missing source address field in flow configurations
- D . flow monitoring was not enabled as device type in web console settings
Which two of the following tasks must be accomplished to monitor servers and connections in a load-balancing environment? (Choose two.)
- A . add Cisco Nexus device in network device configuration manager
- B . add Cisco Nexus device in network health / performance monitoring
- C . enable CLI polling
- D . enable F5 iControl polling
What is a possible result of decreasing the top talking optimization value?
- A . increased storage requirement
- B . reduced database performance
- C . reduced page load times
- D . slower reporting speed
Which two of the following troubleshooting steps can be performed when a node is “up” and the data cannot be found in SolarWinds’ platform web console? (Choose two.)
- A . Add a remote site node and make sure the firewall rules are configured to allow SNMP traffic.
- B . Ping the device from the polling engine the device is assigned to using the command line.
- C . Verify hardware health sensors on the device provide both status and values.
- D . Wait ten minutes after a device is added to the console. Refresh the screen.
Which tool can be used to display the physical layout of interfaces on graphical stencils?
- A . device studio
- B . device view
- C . NetPath
- D . network insight
Which two of the following best practices are used when creating a universal device poller (UDP)? (Choose two.)
- A . Call SolarWinds support for object ID (OID) options.
- B . Consult vendor documentation for OID.
- C . Perform SNMPwalk to determine if OID exists.
- D . Run WBemtest to test communication to OID.
A poller is to be built that will add two values together to show a single value in the web console using the universal device poller (UDP) tool.
How would this be accomplished?
- A . add both object IDs (OIDs) to the poller and combine values in a single value for the web console
- B . build a poller for each OID then use transform results to combine values from the two pollers
- C . UDP tool does not support more than one OID per poller, another OID is needed
- D . UDP tool does not support more than one OID per poller, another tool is needed
Which two of the following flow sources are supported by hybrid cloud observability? (Choose two.)
- A . Cisco
- B . cFlow
- C . J-Flow
- D . NetStream
Which two of the following statements explain creating alerts for NBAR2 applications? (Choose two.)
- A . Applications and NBAR2 applications in top applications are sorted by bits.
- B . Applications and NBAR2 applications in top applications are sorted by bytes.
- C . It is not possible to combine applications and NBAR2 applications.
- D . It is possible to combine applications and NBAR2 applications.
Which port allows log analysis in the SolarWinds platform to accept secure syslog messages?
- A . TCP port 601
- B . TCP port 6514
- C . UDP port 514
- D . UDP port 10514
Which three of the following traffic flow protocols (supported by hybrid cloud observability’s flow monitoring) support flow sampling? (Choose three.)
- A . Cisco NetFlow
- B . IPF1X
- C . NetFlow Lite
- D . NetFlow V1
Which custom filter allows a user to view specific statistics about an entire network and its devices without having to navigate through the web console by single-device views?
- A . flow alert
- B . flow navigator
- C . NBAR2
- D . top 10 applications
Which three of the following data points does NetFlow use to confirm traffic is in the same flow? (Choose three.)
- A . interface name
- B . IP address
- C . L3 protocol
- D . port number
Which custom poller supports multiple object IDs (OIDs)?
- A . component monitor
- B . device studio
- C . hardware health
- D . universal device poller (UDP)
Which custom poller supports interface traffic, UPS battery status, and CPU temperature?
- A . device studio
- B . hardware health
- C . universal device poller
- D . visualization integration
An unknown traffic event is noted in the web console.
What is the likely cause?
- A . a firewall is blocking the traffic flow configurations
- B . incorrectly configured source or destination port in the flows
- C . missing a byte group from flow field configurations
- D . receiving flows from a device not monitored by the network
What can be done to show the description of an object ID (OID)?
- A . Contact vendor to obtain the latest SNMPwalk.
- B . Download the latest OlD.cfq from customer portal.
- C . Perform an SNMPwalk on the tarqet device.
- D . Update the MIB database via SolarWinds support.
Which NetFlow component can be applied to an interface to track IPv4 traffic?
- A . flow exporter
- B . flow monitor
- C . flow record
- D . Iflow sampler
It is noted that the hardware health monitoring for a Cisco switch is generating false positives. It is verified that the alerted hardware issues are not occurring.
What is causing the issue?
- A . Hardware sensors were incorrectly assigned to another switch.
- B . MIB on the device is not the preferred MIB that is being polled.
- C . Modify the widget thresholds to filter out the false positives.
- D . Restart SNMP on the device to refresh the hardware statistics.
Which SNMP version allows usernames and passwords?
- A . version 1
- B . version 2c
- C . version 3
- D . version 4
Which port needs to be open in order to analyze flow and monitor CBQoS?
- A . Flow (SNMP, 161), CBQoS (TCP, 2055)
- B . Flow (SNMP, 161), CBQoS (UDP, 2055)
- C . Flow (TCP, 2055), CBQoS (SNMP, 161)
- D . Flow (UDP, 2055), CBQoS (SNMP, 161)
If the data collected for hardware health is incorrect, which step could rectify the issue?
- A . Change the MIB tree used for polling.
- B . Change the poller assigned to sensor.
- C . Create a custom goller in device studio for fan speed, power supply, and temperature.
- D . Download the MIB file from the SolarWinds website and add it to the device’s firmware.
If an IP address group is hidden in IP address groups management, what impact will it have on the data?
- A . group historical data will be deleted
- B . group will be shown in compliance reports
- C . group will not be shown in charts or reports
- D . group will not be shown in IPAM
In which two of the following cases does duplicate flow data occur? (Choose two.)
- A . both IP flow ingress and egress applied for all interfaces
- B . both IP flow ingress and egress applied on one interface
- C . IP flow ingress applied on all interfaces, no egress usage
- D . IP flow ingress on some interfaces and egress on others
Several resources are showing duplicate flow data.
What is the most likely cause?
- A . interfaces have duplicate entries in flow sources management
- B . interfaces in flow sources management are set to drop
- C . SolarWinds’ NetFlow service needs to be restarted
- D . source devices are configured to export flow data on ingress and egress
SNMP get type defines the SNMP polling method used by a universal device poller (UDP) to get the device’s object ID (OID) values.
Which SNMP get type retrieves values from a particular column?
- A . column
- B . data
- C . next
- D . table
It is noted in flow source view that some devices are showing “never received” in the last received flow column. It is verified that the flows are not being blocked by a firewall.
What is the likely cause?
- A . flows are IPv6 and not supported by the network monitoring features
- B . interface is no longer monitored by the network monitoring features
- C . node is no longer monitored by the monitoring features
- D . a primary field of data is missing and being dropped
Which two of the following flow technologies are supported? (Choose two.)
- A . GFlow
- B . HFlow
- C . J-Flow
- D . sFlow
One NetPath probe is showing a “no data found” error, however other probes are returning data without issue.
What is the most likely resolution?
- A . add the probe ID to the engines table manually
- B . delete the probe, reinstall the agent manually, and re-add the probe
- C . probe was added in NetPath without an agent installed on its node
- D . restart the SolarWinds agent service on the node
Which two of the following Windows versions are supported for log collection in hybrid cloud observability? (Choose two.)
- A . Windows 10
- B . Windows server 2012
- C . Windows server 2019
- D . Windows Vista
From which two of the following locations can the status of the flow collector service be checked? (Choose two.)
- A . flow and CBQoS sources
- B . NetFlow collector services
- C . NetFlow settinqs
- D . top XX receivers
Which two of the following processing policies are processed independently and at the same time? (Choose two.)
- A . global post
- B . global pre
- C . svslog
- D . traps
Which tool presents live flow traffic data sourced from / to a main polling engine server, providing basic insight into traffic on the main polling engine?
- A . CBQoS/flow sources
- B . collector service
- C . flow navigator
- D . local NetFlow source
Which method is used to add new UPS battery status statistics onto an existing node that does not have the default value polled?
- A . create new custom device poller
- B . custom statistics cannot be added to 3n existing node
- C . define custom statistic with universal device poller (UnDP)
- D . update SolarWinds’ MIB database
SNMP traps are being received from several devices. While most of the traps are normal, traps from one of the devices contain fields that are unreadable. The device is not being monitored in any other way.
Which two of the following points should be checked? (Choose two.)
- A . Verify the device is not using SNMFV3 and is added as a node.
- B . Verity the device supports hybrid cloud
- C . Verify the device supports SNMP and is added as a node.
- D . Verify the device’s MIBfile is in SolarWinds’ MIB database.
What is the unit of data used for alerting on flows?
- A . bPs
- B . gps
- C . mbps
- D . ms
On a single node, one or more interfaces are showing an “unknown” status.
What is the best way to resolve the issue?
- A . Change node’s polling method to ICMP.
- B . Delete and rediscover the node showing affected interfaces.
- C . Delete and re-add the affected interfaces.
- D . Verify the interfaces are assigned to SolarWinds’ native poller.
What is the correct sequence of steps to create a device studio poller?
- A . Assign the poller to node, select the technology, specify the data source, and save the poller.
- B . Select the technology, assign the poller to node, specify the data source, and save the poller.
- C . Select the technology, specify the data source, assign the poller to node, and save the poller.
- D . Select the technology, specify the data source, save the poller, and assign the poller to node.
Network wide node and interface changes were recently made to several fields including names and IP addresses on nodes, captions, and aliases for their interfaces. Those changes are not updated in the hybrid cloud observability web console, even if a new polling is forced.
What should be done to resolve the issue?
- A . Delete and re-add each of the nodes and their interfaces.
- B . Manually update the changed information in each poller.
- C . Run a rediscovery on both nodes and interfaces to refresh the data.
- D . Run a rediscovery on the node, which will also update the interfaces.
Which additional polling method is needed after adding Cisco ASA and Cisco Nexus for SNMP monitoring?
- A . API
- B . ICLI
- C . Control
- D . WMI
A universal device poller (UDP) is being built for a metric to monitor in a radial gauge of a web console. When a gauge resource in the poller is to be selected, it is found that the resource is grayed out.
What could be causing this?
- A . object ID (OID) polled does not support radial gauge.
- B . OID polled is not in current MIB file of MIB database.
- C . OID polled is not supported by the device.
- D . UDP does not support gauges to display polled information.
Event logs are to be collected from Windows servers in order to be analyzed in hybrid cloud observability.
Which two of the following actions must be taken in order to accomplish this ask? (Choose two.)
- A . configure a rule on hybrid cloud observability to poll the server and collect logs
- B . configure a rule on hybrid cloud observability to read event log folder locations
- C . configure server to send logs to another server running the platform
- D . deploy and configure the platform agent to collect the logs
Which statement depicts the relationship between device studio pollers’ supported technologies and universal device pollers’ (UDPs) supported technologies?
- A . device studio pollers can poll for CPU utilization of SNMP enabled devices, UDPs cannot
- B . device studio pollers can poll for node details of SNMP enabled devices, UDPs cannot
- C . UDPs can poll for hardware status of SNMP enabled devices, device studio pollers cannot
- D . UDPs can poll for memory utilization of SNMP enabled devices, device studio pollers cannot
A NetPath probe is to be built to monitor the paths between two sites. No Windows servers are available to run the agent.
Which two of the following options can be used to set up the probe? (Choose two.)
- A . Install the agent on a red hat Linux server.
- B . Install the agent on a Windows 10 computer.
- C . Run the probe from the hybrid cloud observability (HCO) server.
- D . Use the network device agent to run the probe from the router.
A universal device poller (UDP) and a transformer are built to display a transform value for a node’s CPU temperature, however the value is not transformed as displayed on the web console.
Which two of the following reasons could have caused the issue? (Choose two.)
- A . custom poller used for transformation is not assigned to same node
- B . custom poller and transformer are not using same polling interval
- C . node polling interval does not match the custom poller interval
- D . polling interval for the custom poller is using the default value