MikroTik MTCNA MikroTik Certified Network Associate Exam Online Training
MikroTik MTCNA Online Training
The questions for MTCNA were last updated at Nov 01,2025.
- Exam Code: MTCNA
 - Exam Name: MikroTik Certified Network Associate Exam
 - Certification Provider: MikroTik
 - Latest update: Nov 01,2025
 
Action=redirect applies to
- A . Firewall Filter rules
 - B . DST-NAT rules
 - C . Route rules
 - D . SRC-NAT rules
 
How many usable IP addresses are there in a 23-bit (255.255.254.0) subnet?
- A . 512
 - B . 510
 - C . 508
 - D . 254
 
When sending out an ARP request, an IP host is expecting what kind of address for an answer?
- A . VLAN ID
 - B . IP address
 - C . MAC Address
 - D . 802.11g
 
What is marked by connection-state=established matcher?
- A . Packet belongs to an existing connection, for example a reply packet or a packet which belongs to already replied connection
 - B . Packet is related to, but not part of an existing connection
 - C . Packet does not correspond to any known connection
 - D . Packet begins a new TCP connection
 
What kind of users are listed in the "/user" menu?
- A . router users
 - B . wireless users
 - C . Hot-Spot users
 - D . pptp users
 
In which order are the entries in Access List and Connect List processed?
- A . By Signal Strength Range
 - B . By interface name
 - C . In sequence order
 - D . In a random order
 
What is the minimal possible wireless configuration to create an Access Point?
- A . radio name
 - B . scan-list
 - C . frequency
 - D . band
 - E . ssid
 - F . DFS mode
 - G . WDS
 - H . mode
 
Which of the following is the decimal and hexadecimal equivalents of the binary number 10011101?
- A . 155, 0x9B
 - B . 157, 0x9D
 - C . 159, 0x9F
 - D . 185, 0xB9
 
Which of the following protocols / port s are used for SNMP. (Simple Network Managemnt Protocol)
- A . TCP 25
 - B . TCP 161
 - C . UDP 162
 - D . TCP 162
 - E . TCP 123
 - F . UDP 161
 
It is required to make a web server on a private LAN visible on the Public Internet. Only the web server port should be visible to the public.
Which of the following configuration steps must be met? (select all that apply)
- A . Public IP address of the webserver must be installed on the NAT Router
 - B . in ip firewall NAT there should be a dst-nat between the public ip of the router and the private ip of the webserver
 - C . Connection Tracking must be enabled on NAT router
 - D . A route between the NAT Router and the webserver must exist
 - E . LAN address of the webserver should be routable on the internet
 
	
																
thankyou