Exam4Training

Huawei H35-561-ENU HCIP-LTE-RNP&RNO V1.0 Online Training

Question #1

When the X2 switchover cannot be performed between the eNodeBs, the S1 switchover is performed.

  • A . True
  • B . False

Reveal Solution Hide Solution

Correct Answer: A
Question #2

Which of the following are key indicators concerned by LTE network planning? (Multiple Choice)

  • A . RSRP
  • B . CRS SINR
  • C . Throughput Rate
  • D . Cell Load

Reveal Solution Hide Solution

Correct Answer: ABCD
Question #3

In which message is the voice capability of the VoLTE terminal reported to the MME?

  • A . Attach Request
  • B . UE Capability Information Indication
  • C . Initial Context Setup Response
  • D . Attach Complete

Reveal Solution Hide Solution

Correct Answer: A
Question #4

Which of the following options can be solved with ICIC technology?

  • A . Adjacent Channel Interference
  • B . Co-channel Interference
  • C . Random Interference
  • D . Heterogeneous System Interference

Reveal Solution Hide Solution

Correct Answer: B
Question #5

Which of the following are the functions of the X1AP protocol? (Multiple Choice)

  • A . Mobility management
  • B . Load management
  • C . eNodeB configuration update
  • D . Paging

Reveal Solution Hide Solution

Correct Answer: ABC
Question #6

About the related concepts of carrier aggregation, which description are correct? (Multiple Choice)

  • A . The primary cell is the cell in which the CA UE resides, that is, the PCell. The operation of the CA UE in this cell is no different from other R8/9 cells, only the PCell has the PUCCH channel.
  • B . A secondary cell refers to a cell that is configured to a CA UE by using RRC connection signaling, and operates on a secondary carrier to provide more radio resources for the CA UE. SCell only has a down line and no uplink
  • C . Component carrier refers to the carrier corresponding to different cells participating in carrier aggregation
  • D . PCC anchor point, which refers to the high priority resident PCC selected by the eNodeB

Reveal Solution Hide Solution

Correct Answer: ACD
Question #7

About the statement of IRATHO, which are correct? (Multiple Choice)

  • A . The HUAWEI eNodeB supports differentiating target system (UTRAN system or GERAN system) to set different event A2 parameters, so as to preferentially trigger the coverage-based switching purpose to the UTRAN system or the GERAN system.
  • B . When the thresholds of the UTRAN and the GERAN are the same, the eNodeB sends down two different system events A2, which correspond to different systems. When the UE reports the event A2 of the corresponding system, the eNodeB sends down the heterogeneous system measurement of the corresponding system.
  • C . When the threshold offsets of the UTRAN and GERAN systems are the same, the eNodeB sends down a distinct system event A2, which does not distinguish the system. When the UE reports the event A2, the eNodeB simultaneously sends down the UTRAN and GERAN system measurements.
  • D . When the base station receives the blind A2 event of the different frequency system, if the sub-switch EmCInterFmqBlindHoSwitch in the parameter CeIIHoParaCfg.CellHoAlgoSwitch is turned on, the different system redirection process based on the measurement report is directly executed.

Reveal Solution Hide Solution

Correct Answer: ABC
Question #8

Which of the following types of mobile phones can support up to 2CC (two carrier aggregation)?

  • A . Category 4
  • B . Category 6
  • C . Category 8
  • D . Category 10

Reveal Solution Hide Solution

Correct Answer: B
Question #9

Which of the following can be considered as good for testing the wireless environment in an LTE system?

  • A . RSRP=-90dBm, SINR=11dB
  • B . RSRP=-95dBm, SINR=17dB
  • C . RSRP=-85dBm, SINR=3dB
  • D . RSRP=-75dBm, SINR=25dB

Reveal Solution Hide Solution

Correct Answer: B
Question #10

Regarding the description of RRC establishment success rate, which of the following options is wrong?

  • A . Reflecting the UE’s admission capability of the eNB or the cell
  • B . The successful establishment of the RRC connection means that the UE establishes a signaling connection with the network.
  • C . RRC connection establishment can be divided into two cases: one is the RRC connection establishment related to the service; the other is the RRC connection establishment irrelevant to the service (such as emergency call, inter-system cell reselection, registration, etc.)
  • D . Service-Independent RRC connection establishment is an important indicator to measure the call completion rate. The service-related RRC connection establishment can be used to investigate the system load situation.

Reveal Solution Hide Solution

Correct Answer: D

Question #11

To FDD, in which of the following time slots are the primary synchronization signals transmitted?

  • A . TS0
  • B . TS1
  • C . TS10
  • D . TS11

Reveal Solution Hide Solution

Correct Answer: AC
Question #12

Which parameter on the road test tool can be observed to judge the single/double stream when testing?

  • A . PCI
  • B . Rank
  • C . MCS
  • D . RSRP

Reveal Solution Hide Solution

Correct Answer: B
Question #13

Carrier aggregation, if differentiated scheduling is used, on the PCell and the SCell, the CA UE is regarded as an independent UE to allocate resources, and the rate of CA UE is higher than that of the non-CA UE.

  • A . True
  • B . False

Reveal Solution Hide Solution

Correct Answer: A
Question #14

Which of the following messages carrying the SRVCC indication can indicate that the feature has been activated?

  • A . Handover Required
  • B . RRC Connection Reconfiguration
  • C . RRC Connection Setup
  • D . Measurement Reports

Reveal Solution Hide Solution

Correct Answer: A
Question #15

Single-user call test can choose short FTP or long FTP.

  • A . True
  • B . False

Reveal Solution Hide Solution

Correct Answer: A
Question #16

Which of the following bearers are included in the E-RAB bearer? (Multiple Choice)

  • A . Wireless bearer
  • B . S1 bearer
  • C . EPS bearer
  • D . End-to-end bearer

Reveal Solution Hide Solution

Correct Answer: AB
Question #17

In the switch measurement configuration message, which one is not included in the measured object?

  • A . Target system
  • B . Measurement frequency
  • C . Measurement bandwidth
  • D . Measurement duration

Reveal Solution Hide Solution

Correct Answer: D
Question #18

A service cell A to neighboring area B is switched too late. Which of the following parameter modification is correct? (Multiple Choice)

  • A . Time to Triger changed from 320ms to 640ms
  • B . Time to Triger changed from 320ms to 120ms
  • C . Set the CIO (Ocn) value of the B cell to be larger
  • D . Set the Ocs value of the A cell to be smaller

Reveal Solution Hide Solution

Correct Answer: BCD
Question #19

Which of the following PRACH access preambles are available for both FDD and TDD? (Multiple Choice)

  • A . Leading format 1
  • B . Leading format 2
  • C . Leading format 3
  • D . Leading format 4

Reveal Solution Hide Solution

Correct Answer: ABC
Question #20

PDSCH bears DL-SCH and PCH information.

  • A . True
  • B . False

Reveal Solution Hide Solution

Correct Answer: A
Exit mobile version