Exam4Training

Huawei H11-828-ENU HCIP-UC(Huawei Certified ICT Professional-Unified Communications) Online Training

Question #1

In external network access scenarios of the eSpace UC solution, eSpace UC clients (for example, eSpace Desktop) on external networks finally register with the ( ) to implement the voice function.

  • A . eServer
  • B . U1900
  • C . SBC
  • D . MAA

Reveal Solution Hide Solution

Correct Answer: B
Question #2

Before configuring a prefix of the local call attribute on a U1900 series unified gateway, the system

will ask you to configure a prefix of the national toll call attribute and a prefix of the international

toll call attribute.

  • A . TRUE
  • B . FALSE

Reveal Solution Hide Solution

Correct Answer: A
Question #3

In a scenario where the AR provides the local regeneration function, a call fails. During the fault locating process, to identify the calling and called number information before and after the number change, obtain the debugging information of the ( ) module.

  • A . CCM
  • B . Innertrace
  • C . sipmsg
  • D . dss1

Reveal Solution Hide Solution

Correct Answer: A
Question #4

When adding users with non-UC rights on the BMU in batches, the user accounts fail to be added and the system displays a message indicating that the number of mobile client users exceeds the maximum value specified in the license.

Which of the following methods can be used to solve the problem?

  • A . Revoke the mobile client rights of common users.
  • B . Add users with non-UC rights one by one.
  • C . Ensure that local authentication is enabled on the BMU.

Reveal Solution Hide Solution

Correct Answer: A
Question #5

AR routers provide flexible slot combinations. Two SIC slots can be combined into one WSIC slot. Two SIC slots and the WSIC slot below can be combined into one XSIC slot by removing the guide rail.

  • A . TRUE
  • B . FALSE

Reveal Solution Hide Solution

Correct Answer: A
Question #6

About the local regeneration call source of U1900 series unified gateways, which of the following statements are CORRECT? (Multiple Choice)

  • A . The purpose of configuring the local regeneration call source is to implement the local regeneration function for local SIP users.
  • B . The purpose of configuring the local regeneration call source is to implement the local regeneration function for local POTS users.
  • C . The local regeneration call source is configured on the primary node.
  • D . If the local node has only SIP users, the local regeneration call source is not required.

Reveal Solution Hide Solution

Correct Answer: BD
Question #7

A group customer deploys two U1981s in active/standby disaster recovery (DR) mode and deploys a U1960 in both branch A and branch B as the local gateway. One day, due to the carrier network fault, the U1960 in branch A cannot detect the heartbeat of the active and standby U1981S, but the heartbeat connection between the U1960 in branch B and the active and standby U1981s is normal.

In this scenario, which of the following statements is CORRECT?

  • A . Remote disaster recovery (DR) will be triggered.
  • B . Local regeneration occurs on the U1960 in branch A.
  • C . Local regeneration occurs on the U1960 in branch B.
  • D . Nothing will happen.

Reveal Solution Hide Solution

Correct Answer: B
Question #8

In the eSpace UC solution, at least ( ) network adapters must be configured for the eSpace Audio Recorder in a single-node system.

  • A . 1
  • B . 2
  • C . 3
  • D . 4

Reveal Solution Hide Solution

Correct Answer: B
Question #9

The process for configuring outgoing calls on an AR router at a branch node is as follows: first configure the call route, then the prefix or trunk group, and last the trunk group or prefix.

Which of the following is the logical process for the outgoing call route on the AR router?

  • A . callroute -> prefix -> trunk-group
  • B . prefix -> callroute -> trunk-group
  • C . callroute -> trunk-group -> prefix
  • D . prefix -> trunk-group -> callroute

Reveal Solution Hide Solution

Correct Answer: B
Question #10

What are the possible causes when eSpace Desktop fails to initiate an instant conference? (Multiple Choice)

  • A . The account does not have the right to hold instant conferences.
  • B . The data conference license has expired.
  • C . The client function parameters are incorrectly set in the eServer configuration file.
  • D . Related parameters in the data conference configuration file are incorrectly set.
  • E . The unified gateway, BMU, and data conference server are not time-synchronized.

Reveal Solution Hide Solution

Correct Answer: ABDE

Question #11

The SoftConsole has the ( ) service features. (Multiple Choice)

  • A . Barge and forced release
  • B . Corporate directory
  • C . Incoming call queuing
  • D . Message leaving
  • E . Night service

Reveal Solution Hide Solution

Correct Answer: ABCE
Question #12

In a multi-node centralized network, there is a central node with a U1981 deployed and a branch node with a U1911 deployed. SIP user A under U1911 calls an external PSTN user through the branch node’s El trunk. After the call is connected, the path along which the RTP streams are transmitted is ().

  • A . A<->U1981<->U1911
  • B . A<->U1981
  • C . A<->U1911
  • D . A<->U1911<->U1981<->U1911
  • E . A<->U1981

Reveal Solution Hide Solution

Correct Answer: C
Question #13

An enterprise has two U1981s working in active/standby mode for discover recovery, and the config modify switch waittime 10 command is executed on the standby device. One morning, the active device was faulty at 09:00, and recovered at 09:05. At this time, ().

  • A . Services were automatically switched back to the active device immediately.
  • B . Services can be switched back to the active device only after a switching command is executed manually.
  • C . Data generated during the period when the standby node took over services was automatically
  • D . synchronized to the primary node after the services were switched back to the primary node.

Reveal Solution Hide Solution

Correct Answer: A
Question #14

Which of the following statements is CORRECT about self-service?

  • A . You need to use the administrator account to log in to the BMU.
  • B . You need to use the self-service account to log in to the BMU user interface.
  • C . The default URL for logging in to the self-service page is https://BMU IP address: 18^H3.
  • D . The directory information can be modified through self-service.

Reveal Solution Hide Solution

Correct Answer: B
Question #15

In a multi-node centralized network, there is a central node with a U1981 deployed, and two branch nodes, one with a U1911 and the other with a U1960. When SIP user A under U1911 calls POTS user B under U1960, the path along which the call’s SIP signaling is transmitted is ().

  • A . U1911->U1981->U1960
  • B . U1911->U1960
  • C . A->U1981->U1960
  • D . U1911->U1981->B
  • E . U1911->U1981->B

Reveal Solution Hide Solution

Correct Answer: C
Question #16

The administrator can add information about an enterprise user on the BMU.

  • A . TRUE
  • B . FALSE

Reveal Solution Hide Solution

Correct Answer: A
Question #17

Which of the following statements are CORRECT about mobile rich media functions? (Multiple Choice)

  • A . Rich media include pictures.
  • B . Rich media include audio clips.
  • C . Rich media include video clips.
  • D . eSpace Mobile can send rich media to eSpace Desktop.
  • E . eSpace Mobile cannot send rich media to eSpace Desktop.

Reveal Solution Hide Solution

Correct Answer: ABCD
Question #18

About the multimedia conference service, which of the following statements are CORRECT? (Multiple Choice)

  • A . The voice conference resources are provided by the unified gateway.
  • B . The conference control function is provided by the data conference server.
  • C . In a peer-to-peer network, the conference access code for a data conference can be the same on each of the unified gateway.
  • D . When you schedule a conference, the number of participants can exceed the upper limit supported by the license of the unified gateway. But the number of concurrent online users in conferences cannot exceed the license’s upper limit

Reveal Solution Hide Solution

Correct Answer: AB
Question #19

In a multi-node centralized call management network, when local node is connected to the central active and standby node, the SIP trunks and the office route selection codes are automatically created after a distributed network is configured.

  • A . TRUE
  • B . FALSE

Reveal Solution Hide Solution

Correct Answer: A
Question #20

In the local regeneration scenario, assume that user A is a SIP user in branch site 1 and user B is a PSTN user outside branch site 1. User A calls user B through the gateway in branch site 1. In the case that local regeneration occurs in branch site 1, RTP streams go through the following path after user A calls user B and the call between user A and user B is set up: ().

  • A . User A <->branch site 1
  • B . User A <->central site<->branch site 1
  • C . User A <->branch site 1->central site->branch site 1
  • D . None of the above

Reveal Solution Hide Solution

Correct Answer: A
Exit mobile version