- All Exams Instant Download
For which type of link aggregation is the administrator required to enter the lacp command in the interface context?
A network administrator needs to configure a link aggregation on an ArubaOS switch. For which type of link aggregation is the administrator required to enter the lacp command in the interface context?A . a distributed LACP link aggregationB . a dynamic LACP link aggregationC . a static LACP link aggregationD...
How can the administrator achieve this goal?
A network administrator wants to be able to access an Aruba Instant cluster at the same IP address even if the current master fails. How can the administrator achieve this goal?A . Configure a VC IP address that is a reserved IP address in the AP’s subnet.B . Configure the...
How should the administrator contact the switch and log in?
An ArubaOS switch operates at its factory default settings. A network administrator connects the switch to a VLAN with a DHCP server. The switch-to-switch connection carries untagged traffic. The administrator wants to use Telnet log in to the switch CLI. How should the administrator contact the switch and log in?A...
What must the administrator do to establish the fabric in this way?
A network administrator just received two switches and wants to use the plug-and-play method to establish a Virtual Switching Framework (VSF) fabric with the fewest steps possible. What must the administrator do to establish the fabric in this way?A . Configure a VSF link on the commander, and enable VSF...
How should the network administrator configure the link between Switch A and Switch B to ensure that all hosts can communicate to all the other hosts within their respective VLANs?
Refer to the exhibit. The network consists of two ArubaOS switches with routing disabled. How should the network administrator configure the link between Switch A and Switch B to ensure that all hosts can communicate to all the other hosts within their respective VLANs?A . tagged for VLAN 20 and...
Which additional step must the administrator take to enable Switch-1 to advertise 192.168.2.0/24 to Switch-2?
Refer to the exhibit. Exhibit 1. Exhibit 2. Assume that Switch-2 is correctly configured for OSPF. Which additional step must the administrator take to enable Switch-1 to advertise 192.168.2.0/24 to Switch-2?A . Set a router ID on Switch-1.B . Configure a route to advertise 192.168.2.0/24 on Switch-1.C . Add Switch-2’s...
How does a switch treat a link aggregation?
How does a switch treat a link aggregation?A . The switch treats the link aggregation as one logical link for spanning tree, but it learns MAC addresses separately on each individual interface within the aggregation.B . The switch treats the link aggregation as one logical link. It assigns one spanning...
Which statement correctly describes how the switches handle routing?
Two switches are members of a Virtual Switching Framework (VSF) fabric. Which statement correctly describes how the switches handle routing?A . Only the commander runs routing protocols and builds the IP routing table, but it programs the standby member to route traffic.B . Both members build their own IP routing...
What should the administrator use as the next hop address?
A network administrator needs to configure a static route. What should the administrator use as the next hop address?A . the lowest IP address on the neighboring router in the path towards its destinationB . the IP address on the local interface that is used to egress traffic towards its...
What is one benefit that Aruba AirWave can provide to a customer with ArubaOS switches?
What is one benefit that Aruba AirWave can provide to a customer with ArubaOS switches?A . It can audit switch firmware (software) and automate updates.B . It can enable the switches to provide mobility controller functions for connected Instant APs (IAPs).C . It can provide centralized authentication and authorization for...
