Which program is used to perform the “New Installation” procedure on a VSP midrange system?
- A . MPC
- B . Webconsole
- C . GUM
- D . BECK
C
Explanation:
Reference: https://support.hitachivantara.com/download/epcra/hc2135.pdf
Which tool do you use to install license keys on a VSP G370 system?
- A . HSA Embedded
- B . MPC Software
- C . Storage Navigator
- D . Maintenance Utility
C
Explanation:
Storage Navigator is the tool you use to install license keys on a VSP G370 system. It is a web-based management tool provided by Hitachi Vantara for managing and monitoring VSP storage systems. With Storage Navigator, you can manage system settings, configure hardware and software components, and install license keys to enable various features on the VSP G370 system.
How many batteries does a VSP E1090 have per controller (CTL)?
- A . 1
- B . 2
- C . 3
- D . 4
Which two reconfiguration activities are performed without interrupting host access on a VSP Gx00 system? (Choose two.) Choose 2 answers
- A . adding a DKB
- B . adding a DB60 drive tray
- C . upgrading from G200 to G800
- D . upgrading from G200 to G600
You are installing a new VSP G700 and are using the Initial Setup Wizard (ISW) for the network configuration.
Which set of IP addresses is configured with the ISW?
- A . IP addresses of maintenance ports
- B . IP addresses of management ports
- C . IP addresses of all the ports
- D . IP addresses of all the ports and of the SVP
What are two functions of the LAN Blade in the VSP Midrange family? (Choose two.)
- A . It provides the LAN connection to the file module.
- B . It provides the maintenance port connecting to the MPC.
- C . It provides the iSCSI connection to the servers.
- D . It provides the management port connecting to the customer LAN.
A,D
Explanation:
Reference: https://knowledge.hitachivantara.com/Documents/Storage/VSP_G130_GF350_GF370_GF 700_GF900/88-04-0x/About_Your_System/VSP_G700_Hardware/02_VSP_G700_Controller
You are installing a VSP F370 and you need to connect your laptop to one of the controllers.
What are the two default IP addresses of the maintenance ports of CTL1 and CTL2? (Choose two.)
- A . 10.0.0.17
- B . 10.0.0.16
- C . 192.168.0.17
- D . 192.168.0.16
A,B
Explanation:
When installing a VSP F370, the two default IP addresses for the maintenance ports of CTL1 and CTL2 are 10.0.0.17 and 10.0.0.16, respectively. These IP addresses are used to establish a connection between your laptop and the controllers during the installation process.
A customer wants to change a production RAID group from RAID 5 (7D+1P) to RAID 6 (6D+2P) on a VSP G600 during normal operations. They have just unmapped the LUNs from the channel ports.
What needs to be performed next?
- A . Parity groups must be deleted.
- B . The RAID level must be changed in Storage Navigator.
- C . The RAID level in the SVP Maintenance window must be changed.
- D . The RAID 5 group must be put into DRU mode in Storage Navigator.
A customer wants to upgrade a VSP G700 to 512 GB RAM capacity.
What is the valid CFM configuration?
- A . two BM35 per controller
- B . two BM45 per controller
- C . one BM45 per controller
- D . two BM35 per system
B
Explanation:
Reference: https://www.hitachivantara.com/en-us/products/storage/storage-family/vsp-gx00
What are two valid back-end SAS cable connections on a VSP midrange system? (Choose two.)
- A . from DKA to DKB
- B . from ENC to ENC
- C . from DKB to ENC
- D . from DKA to SSW
A,C
Explanation:
Reference: https://knowledge.hitachivantara.com/Documents/Storage/VSP_G130_GF350_GF370_GF700_GF900/88-07-0x/About_Your_System/VSP_G900_Hardware/09_Data_and_power_cables