- All Exams Instant Download
What accurately describes the Simple Network Time Protocol (SNTP)?
What accurately describes the Simple Network Time Protocol (SNTP)?A . Time synchronization algorithms are more complex and account for clock driftB . Implemented on a Dell EMC Network OS 9 and OS 10C . SNTP devices can act as both clients and serversD . Client makes sudden changes to adjust...
Which command sequence leads to the successful creation of a Layer 3 port channel on an OS10 switch?
Which command sequence leads to the successful creation of a Layer 3 port channel on an OS10 switch?A . 1(config-if-po-2)# ip address 192.168.0.0/31 S1(config-if-po-2)# no switchportB . S1(config-if-po-2)# ip address 192.168.0.0/31 S1(config-if-po-2)# no switchportC . S1(config-if-po-2)# ip address 192.168.0.0/31 S1(config-if-po-2)# switchport mode IPv4D . S1(config-if-po-2)# no switchport S1(config-if-po-2)# ip address...
What is the maximum frequency of a CAT6 UTP cable?
What is the maximum frequency of a CAT6 UTP cable?A . 100 MHzB . 250 MHzC . 500 MHzD . 600 MHzView AnswerAnswer: B
What subnet mask can be used to produce at least five networks that can each support 28 hosts?
You have been tasked with designing an IPv4 scheme for the 192.168.40.0/24 network. What subnet mask can be used to produce at least five networks that can each support 28 hosts?A . 255.255.255.224B . 255.255.255.128C . 255.255.255.240D . 255.255.255.192View AnswerAnswer: A
Which nanometer range will an SFP work in multi-mode?
Which nanometer range will an SFP work in multi-mode?A . 850B . 1310C . 1510D . 1610View AnswerAnswer: A
Which parameter is required to match an OSPF Adjacency to form?
Which parameter is required to match an OSPF Adjacency to form?A . IP addressesB . Area IDC . Switch modelsD . Switch firmware versionView AnswerAnswer: B
What are the required commands to configure a native VLAN of 10 and a tagged VLAN of 20 on an OS6 switch?
What are the required commands to configure a native VLAN of 10 and a tagged VLAN of 20 on an OS6 switch?A . # interface ethernet 1/6 # switchport trunk encapsulation dot1 # switchport trunk native vlan 10 # switchport trunk allowed vlan 20 # switchport mode trunkB . #...
How many total addresses for network, broadcast, and host are provided with the subnet mask 255.255.255.240?
How many total addresses for network, broadcast, and host are provided with the subnet mask 255.255.255.240?A . 8B . 16C . 24D . 48View AnswerAnswer: B
Which type of domains are connected by a Layer 2 switch?
Which type of domains are connected by a Layer 2 switch?A . Single collision domain and a single broadcast domainB . Multiple broadcast domains and multiple collision domainsC . Multiple collision domains and a single broadcast domainD . Single collision domain and multiple broadcast domainsView AnswerAnswer: C
What are two possible reasons for this issue?
Two N3024F switches are directly connected using 10GBASE-SR transceivers and 10 foot fiber patch cables. The ports on both sides are NOT linking. What are two possible reasons for this issue? (Choose two.)A . The fiber connectors are inverted.B . The transceivers are on SFP ports.C . The fiber length...
