An EMC NetWorker backup job has failed 95% of the way through its operation.
Which functionality is provided by the checkpoint restart feature?
- A . The backup can continue from the last known good point
- B . The backup can always continue exactly where it left off
- C . The backup can be merged with data from the last server checkpoint
- D . The backup must be restarted from the beginning
Which three components comprise EMC NetWorker’s three tier architecture?
- A . Server, Storage Node and Client
- B . Master Server, Media Server and Client
- C . Server, Storage Agent and Client
- D . Cell Manager, Devices and Client
The three primary types of EMC NetWorker hosts form an architecture/topology.
What is this called?
- A . EMC NetWorker Data Zone
- B . EMC NetWorker Storage Domain
- C . EMC NetWorker Storage Zone
- D . EMC NetWorker Cell
Which feature of EMC NetWorker allows multiplexed, heterogeneous data to reside on the same tape?
- A . OTF
- B . TAR
- C . CPIO
- D . ZIP
Which EMC NetWorker feature allows for a failed backup to restart at a known good point prior to the backup failure?
- A . CheckPoint Restart
- B . Client Retries
- C . Scheduled Backup Attempts
- D . Restart Window
An administrator in an EMC NetWorker environment wants to know the exact backup creation date and time along with the backup level.
Which EMC NetWorker functionality should be used to find this information?
- A . Tracking and reporting
- B . Aging
- C . NMC Monitoring
- D . Daemon log
In EMC NetWorker, what best describes the source capacity licensing model?
- A . Aggregate of a full backup from all sources
- B . Aggregate of differential backups from all sources
- C . Aggregate of incremental backups from all sources
- D . Aggregate of Level 9 backups from all sources
A storage administrator backs up an Exchange server to an EMC Data Domain system. The Data Domain system is configured as an advanced file device. The administrator now wants to create a copy of the backup and send it to tape. The backup job completed at 8pm. The administrator wants the copy to be created at 9pm.
Which option should be used?
- A . Use the Scheduled Cloning attribute to schedule a clone job to start at 9pm.
- B . Run the nsrclone command at 8pm and the second copy will be directed to tape at 9pm.
- C . Enable the "clones" attribute in the client’s group setting.
- D . From the Administration window, under Media select Save Sets and then the Query Save Set tab. Create clone copies of the backup at 8pm.
Refer to the exhibit.
The calendar shows the level backup that was taken on each day.
Which data is sent to the backup server on Friday’s backup?
- A . All changes since Tuesday
- B . All changes since Monday
- C . All changes since Wednesday
- D . All changes since Thursday
Which method would you use to recover a file to its same location when the entry for that file no longer exists in the client file index?
- A . Save set
- B . Browsable
- C . Recoverpsm
- D . Clone
The EMC NetWorker software distribution feature is supported on which platform?
- A . Linux
- B . MAC
- C . Netware
- D . Open VMS
An EMC NetWorker backup environment consists of a large database server to be backed up. Backups are performed nightly.
Which schedule would you use starting on Sunday to minimize the number of save sets required for recovery on Friday morning?
A)
B)
C)
D)
- A . Exhibit A
- B . Exhibit B
- C . Exhibit C
- D . Exhibit D
What is a benefit of EMC Networker’s Open Tape Format (OTF)?
- A . Enables storage nodes to be moved to hosts with different OS
- B . Allows an unlimited number of save streams to be simultaneously written to tape
- C . Permits segregation of backup data into a specific set of tape volumes
- D . Enables backup data to be written and read in the local language of the storage node
What is a characteristic of the EMC NetWorker capacity licensing model?
- A . Easy, unlimited deployment of most features, modules, and options.
- B . Does not require back end capacity licensing if backing up to Avamar.
- C . Does not require back end capacity licensing if backing up to Data Domain.
- D . EMC NetWorker module software is not required to backup supported databases in EMC NetWorker.
What EMC NetWorker software component controls the backup device in an EMC NetWorker Data Zone?
- A . Storage Node
- B . Client
- C . Server
- D . EMC NetWorker Management Console
A customer has recently purchased a Data Domain appliance to use with EMC NetWorker as the primary storage. The backup administrator needs to configure EMC NetWorker so that multiple backups and recoveries can be performed from a single device at any given time.
What type of device should the backup administrator configure?
- A . AFTD
- B . LTO
- C . FTD
- D . NFS
Which EMC NetWorker host can belong to multiple data zones?
- A . Client
- B . Storage Node
- C . Server
- D . Remote Storage Node
How does EMC NetWorker respond to an AFTD disk full condition?
- A . Suspends all saves to that volume and runs nsrim.
- B . Marks the volume full and terminates the backup.
- C . Marks the volume full and continues the backup to a new volume.
- D . Initiates a staging job to move files off the Advance File Type Device (AFTD).
Which protocol is used when performing an EMC NetWorker backup to a cloud device ?
- A . TCP
- B . UDP
- C . OST
- D . iSCSI
Which type of device is referred to as a BOOST device?
- A . Data Domain
- B . File Type
- C . Advance File Type
- D . Cloud
Which directory holds the tracking information for each file backed up by the client "tuba" on EMC NetWorker server "soprano"?
- A . /nsr/index/tuba/db6
- B . /nsr/mm/mmvolume6
- C . /nsr/index/soprano/db6
- D . /nsr/index/soprano/mmvolume6
Which window in NMC would the EMC NetWorker backup administrator select to configure a new remote storage node?
- A . Devices
- B . Media
- C . Configuration
- D . Monitoring
Which backup level requires the fewest number of volumes to restore?
- A . Full
- B . Level 5
- C . Level 1
- D . Incremental
How can an EMC NetWorker administrator achieve a recovery of an EMC NetWorker resource database?
- A . Perform a browsable recovery of the /nsr/index directory
- B . Rebuild the database with nsrck command
- C . Recover the SYSTEM save set
- D . Recover the bootstrap save set with mmrecov
Which EMC NetWorker daemon provides client files system information?
- A . nsrfsra
- B . nsrexecd
- C . nsrlcpd
- D . nsrindexd
A backup administrator wants to verify that data was successfully written to an AFTD.
Which window in NMC would the administrator select to go gather this information?
- A . Media
- B . Devices
- C . Configuration
- D . Monitoring
What is a characteristic of how the EMC NetWorker modules integrate with native applications?
- A . EMC NetWorker module acts as an intermediate layer between EMC NetWorker and the native application.
- B . The application vendor provides EMC NetWorker module to allow data protection with EMC NetWorker.
- C . EMC NetWorker module runs on EMC NetWorker server and acts as an intermediate layer for backup data from EMC NetWorker client.
- D . EMC NetWorker module runs on EMC NetWorker storage node and acts as an intermediate layer for backup data from EMC NetWorker client.
Which Microsoft VSS component ensures that the application data is consistent when a shadow copy is created?
- A . Writer
- B . Requestor
- C . Provider
- D . Interceptor
What is a key feature of the EMC NetWorker Module for Databases and Applications?
- A . Delivers a unified solution for database applications in a EMC NetWorker environment.
- B . Supports Exchange and VSS
- C . Supports VMware features for PowerSnap snapshots.
- D . Supports Oracle and Microsoft SQL
What is a key feature of the EMC NetWorker Module for Databases and Applications?
- A . Delivers a unified solution for database applications in a EMC NetWorker environment.
- B . Supports Exchange and VSS
- C . Supports VMware features for PowerSnap snapshots.
- D . Supports Oracle and Microsoft SQL
What is a key feature of the EMC NetWorker Module for Databases and Applications?
- A . Delivers a unified solution for database applications in a EMC NetWorker environment.
- B . Supports Exchange and VSS
- C . Supports VMware features for PowerSnap snapshots.
- D . Supports Oracle and Microsoft SQL
What is a key feature of the EMC NetWorker Module for Databases and Applications?
- A . Delivers a unified solution for database applications in a EMC NetWorker environment.
- B . Supports Exchange and VSS
- C . Supports VMware features for PowerSnap snapshots.
- D . Supports Oracle and Microsoft SQL
What is a key feature of the EMC NetWorker Module for Databases and Applications?
- A . Delivers a unified solution for database applications in a EMC NetWorker environment.
- B . Supports Exchange and VSS
- C . Supports VMware features for PowerSnap snapshots.
- D . Supports Oracle and Microsoft SQL
What is a key feature of the EMC NetWorker Module for Databases and Applications?
- A . Delivers a unified solution for database applications in a EMC NetWorker environment.
- B . Supports Exchange and VSS
- C . Supports VMware features for PowerSnap snapshots.
- D . Supports Oracle and Microsoft SQL
What is a key feature of the EMC NetWorker Module for Databases and Applications?
- A . Delivers a unified solution for database applications in a EMC NetWorker environment.
- B . Supports Exchange and VSS
- C . Supports VMware features for PowerSnap snapshots.
- D . Supports Oracle and Microsoft SQL
What is a key feature of the EMC NetWorker Module for Databases and Applications?
- A . Delivers a unified solution for database applications in a EMC NetWorker environment.
- B . Supports Exchange and VSS
- C . Supports VMware features for PowerSnap snapshots.
- D . Supports Oracle and Microsoft SQL
What is a key feature of the EMC NetWorker Module for Databases and Applications?
- A . Delivers a unified solution for database applications in a EMC NetWorker environment.
- B . Supports Exchange and VSS
- C . Supports VMware features for PowerSnap snapshots.
- D . Supports Oracle and Microsoft SQL
What is a key feature of the EMC NetWorker Module for Databases and Applications?
- A . Delivers a unified solution for database applications in a EMC NetWorker environment.
- B . Supports Exchange and VSS
- C . Supports VMware features for PowerSnap snapshots.
- D . Supports Oracle and Microsoft SQL
What is a key feature of the EMC NetWorker Module for Databases and Applications?
- A . Delivers a unified solution for database applications in a EMC NetWorker environment.
- B . Supports Exchange and VSS
- C . Supports VMware features for PowerSnap snapshots.
- D . Supports Oracle and Microsoft SQL
What is a key feature of the EMC NetWorker Module for Databases and Applications?
- A . Delivers a unified solution for database applications in a EMC NetWorker environment.
- B . Supports Exchange and VSS
- C . Supports VMware features for PowerSnap snapshots.
- D . Supports Oracle and Microsoft SQL
What is a key feature of the EMC NetWorker Module for Databases and Applications?
- A . Delivers a unified solution for database applications in a EMC NetWorker environment.
- B . Supports Exchange and VSS
- C . Supports VMware features for PowerSnap snapshots.
- D . Supports Oracle and Microsoft SQL
What components are included with EMC NetWorker Module for Microsoft Applications?
- A . PowerSnap and Replication Manager
- B . PowerSnap and Microsoft VSS
- C . Microsoft VSS and Replication Manager
- D . PowerSnap and EMC Solutions Enabler
Refer to the exhibit.
In the NMM backup workflow, which process is shown in the box marked "A"?
- A . nsrsnap_vss_save
- B . nsrsnap_save
- C . nsr_moss_save
- D . nsr_ad_save
Which EMC NetWorker command is replaced when using an EMC NetWorker module?
- A . save
- B . savefs
- C . savepnpc
- D . savegrp
An EMC NetWorker administrator wants to back up Microsoft SQL server using EMC NetWorker Module for SQL.
What needs to be specified in the Backup command field?
- A . nsrsqlsv
- B . nsrsnap_vss_save
- C . save
- D . nsrsqlrc
An EMC NetWorker Administrator wants to perform an online backup of Exchange 2010 that is running on a Windows 2008 Operating System.
Which solution should be used?
- A . Install the EMC NetWorker Module for Databases and Applications on the Exchange 2010 host.
- B . Install the EMC NetWorker Module for Microsoft Applications on the Exchange 2010 host.
- C . Install the EMC NetWorker Client which can utilize the VSS technology of Windows 2008.
- D . Install the EMC NetWorker Client which can utilize the savepnpc feature.
An EMC NetWorker administrator wants to perform an online backup of Lotus Domino Server running on Windows 2008 Operating System.
Which solution should be used?
- A . Install the EMC NetWorker Module for Databases and Applications on the Domino host.
- B . Install the EMC NetWorker Module for Microsoft Applications on the Domino host.
- C . Install the EMC NetWorker Client which can utilize the VSS technology of Windows 2008.
- D . Install the EMC NetWorker Client which can utilize the savepnpc feature.
An EMC NetWorker administrator wants to back up Microsoft Exchange server using EMC NetWorker Module for Microsoft Applications.
What needs to be specified in the Backup command field?
- A . nsrsnap_vss_save
- B . nsrxchsv
- C . save
- D . savefs
An EMC administrator backs up Microsoft Exchange server with EMC NetWorker Module for Microsoft Applications.
What best describes backups in this case?
- A . Only scheduled backups are supported.
- B . Backup can be performed from either Exchange server or EMC NetWorker backup server.
- C . Instant backup of Exchange server is not supported.
- D . Instant recovery of Exchange server is not supported.
Using EMC NetWorker Module for Microsoft Applications, an EMC NetWorker administrator backs up a Microsoft Exchange server which resides on an EMC CLARiiON disk array.
What best describes supported features in this case?
- A . Server-less backup is supported.
- B . Server-less backup is not supported.
- C . Rollback recovery is not supported.
- D . Manual backup is supported.
An Administrator needs to back up a Windows file server that has a million small files in a high density file system.
What is the best way to fulfill the Administrator’s requirements?
- A . Block level backup using SnapImage
- B . Volume level backup
- C . Enable client-side compression
- D . Increase client parallelism
You have successfully backed up three SQL servers with EMC NetWorker Module for SQL.
What needs to be done to recover SQL data?
- A . Launch the EMC NetWorker User for SQL.
- B . Modify the browse time within the EMC NetWorker User GUI.
- C . Use Microsoft SQL server native tools to recover the data from EMC NetWorker.
- D . Modify the save set to include the SQL instance or database name.
You need to integrate snapshot technology on SAP backups in an EMC NetWorker environment.
Which module is required?
- A . PowerSnap
- B . SnapImage
- C . SnapView
- D . NMM
What is the first step in the process for information protection using snapshots?
- A . Application needs to be put into a quiesced state
- B . Ensure that all the writes are committed
- C . Capture a logically consistent virtual view of data
- D . Release the application from quiesced state
An EMC NetWorker Administrator needs to be able to back up and recover a high density active file system to the backup devices connected to local or remote storage nodes.
- A . Add the SnapImage module
- B . Add the NDMP module
- C . Add the PowerSnap module
- D . Add EMC NetWorker Module for Microsoft Applications
A site is using EMC NetWorker with EMC NetWorker Module for Databases and Applications for backups.
The administrator wants to eliminate redundant backup data to significantly reduce backup storage requirements.
Which component would you recommend adding to the backup environment?
- A . Data Domain
- B . PowerSnap
- C . SnapImage
- D . SnapView
What is a characteristic of the EMC NetWorker SnapImage module?
- A . Block-level backups of dense file systems
- B . Fast block-level backups of a file system mounted on a proxy server
- C . Immediate recovery of a file system from a persistent snapshot
- D . SAN-based image-level backup and recovery of file systems
An EMC NetWorker administrator has two Microsoft Exchange servers and one Microsoft SharePoint distributed farm that reside on an EMC CLARiiON disk array.
The backup administrator has the following two recovery requirements:
(1) The ability to recover both Exchange and SharePoint data by leveraging Microsoft VSS framework.
(2) The ability to roll back an entire volume to a previous point-in-time.
What is a recommended recovery solution?
- A . EMC NetWorker Module for Microsoft Applications with EMC VSS Provider.
- B . EMC NetWorker Module for Databases and Applications with EMC VSS Provider.
- C . EMC NetWorker Module for Microsoft Applications with Microsoft VSS Provider.
- D . EMC NetWorker Module for Databases and Applications with Microsoft VSS Provider.
An EMC NetWorker administrator has two Microsoft Exchange servers and one Microsoft SharePoint distributed farm. These reside on an EMC CLARiiON disk array.
The backup administrator has two backup requirements:
(1) Back up both Exchange and SharePoint servers by leveraging Microsoft VSS framework.
(2) Minimize the performance impact caused by backup operation.
What is a recommended backup solution?
- A . EMC NetWorker Module for Microsoft Applications with EMC VSS Provider.
- B . EMC NetWorker Module for Databases and Applications with EMC VSS Provider.
- C . EMC NetWorker Module for Microsoft Applications with Microsoft VSS Provider.
- D . EMC NetWorker Module for Databases and Applications with Microsoft VSS Provider.
You have been asked to implement a EMC NetWorker backup solution with the following requirements:
(1) Leverage Microsoft SQL VDI (Virtual Device Interface) backup API.
(2) Be able to back up SQL database, transaction logs and filegroups.
What is a recommended EMC NetWorker add-on module?
- A . EMC NetWorker Module for Microsoft SQL Server.
- B . EMC NetWorker Module for Microsoft Applications.
- C . EMC NetWorker Module for Databases and Applications.
- D . EMC NetWorker PowerSnap Module.
A EMC NetWorker administrator needs to provide customizable backup reporting, alerting, monitoring, and correlation analysis capabilities across an entire backup environment.
Which EMC application should the backup administrator use?
- A . EMC Data Protection Advisor
- B . EMC NetWorker Management Console
- C . EMC HomeBase
- D . EMC Avamar
You have been asked to implement an EMC NetWorker backup solution with the following two requirements:
Be able to back up Microsoft Exchange, SharePoint and Hyper-V servers.
Be able to recover Microsoft application data from a persistent snapshot.
What is a recommended EMC NetWorker add-on module?
- A . EMC NetWorker Module for Microsoft Applications.
- B . EMC NetWorker Module for Databases and Applications.
- C . EMC NetWorker PowerSnap Module.
- D . EMC NetWorker SnapImage Module.
When backing up a Lotus Domino database with EMC NetWorker Module for Databases and Applications, how is the Lotus Domino backup level determined?
- A . For scheduled backups, backup level is determined by the level specified in EMC NetWorker Schedules resource.
- B . For scheduled backups, backup level is determined by the NSR_BACKUP_LEVEL parameter in NMDA configuration file.
- C . For manual backups, backup level is determined by the level specified in EMC NetWorker Schedules resource.
- D . For manual backups, backup level is always Full by default and this can not be changed.
When backing up an Oracle database with EMC NetWorker Module for Databases and Applications, how is the Oracle backup level determined?
- A . Level specified in RMAN backup script.
- B . NSR_BACKUP_LEVEL parameter in NMDA configuration file.
- C . Level specified in EMC NetWorker Schedules resource.
- D . NSR_BACKUP_LEVEL parameter in RMAN backup script.
A backup administrator uses the EMC NetWorker Module for Microsoft Applications. The administrator wants faster recovery of data directly from snapshots on disk for their Microsoft Exchange implementation.
Which technology is used by NMM to perform backups and recovery?
- A . Volume Shadow Copy Service
- B . NDMP
- C . PowerSnap
- D . SnapImage
What is integrated with NMDA to provide snapshot-based protection for DB2?
- A . PowerSnap
- B . SnapImage
- C . VSS
- D . VMware
In an EMC NetWorker environment with a single datazone, which EMC NetWorker software component would you install on hosts that manage backup devices?
- A . storage node
- B . client
- C . server
- D . Management Console
When the EMC NetWorker management console server and the EMC NetWorker server are installed on different hosts, what is required to administer EMC NetWorker server from the EMC NetWorker management console server?
- A . Provide users on the EMC NetWorker management console server the administrative privileges
- B . Provide users on the EMC NetWorker server the administrative privileges
- C . Provide users on the EMC NetWorker management console server the console user privileges
- D . Provide users on the EMC NetWorker server the console user privileges
What is the default TCP/IP port used by EMC NetWorker Management Console database process?
- A . 2638
- B . 9000
- C . 7937
- D . 9001
An EMC NetWorker administrator wants to move NMC from the server where it is currently installed to a new Windows system. The NMC reporting feature is being used.
What must be installed on the new system, in addition to the Console server software?
- A . EMC NetWorker Client software and Java Runtime Environment
- B . Java Runtime Environment and Change Journal Manager software
- C . EMC NetWorker Client software and Change Journal Manager software
- D . EMC NetWorker Storage Node software and Java Runtime Environment
When connecting to an EMC NetWorker console server from a different host, an error message indicates that a supported version of Java Runtime Environment (JRE) is not installed. You verify that the supported JRE version is already installed on the EMC NetWorker console server.
However, the error message remains.
What needs to be done to resolve the problem?
- A . Install the supported version of JRE on the NMC client
- B . Reinstall the EMC NetWorker Management Console server.
- C . Reinstall the existing JRE version.
- D . Restart the console server.
An EMC NetWorker Administrator wants to start all of the EMC NetWorker processes on a Solaris server.
Which command would run?
- A . /etc/init.d/networker start
- B . /etc/rc2.d/gst start
- C . /sbin/int.d/networker start
- D . /sbin/init.d/gst start
Your Windows environment consists of several EMC NetWorker servers on the same subnet that is responsible for backing up only specific clients for security reasons. You need to change one backup client’s NetWorker server to allow it to be backed up by both NWServer-A and NWServer-B.
Which file do you need to change in order to meet this requirement?
- A .
srresservers on Networker Client - B .
srres
srdbdbg on NetWorker Server - C .
srmm
srim.priv on Storage Node - D . Networkr.cfg on NMC Server
What is a function of the nsrwatch program?
- A . View active sessions
- B . Generate online reports
- C . View all NetWorker Servers
- D . View device configuration changes
What is the command to manually start the EMC NetWorker processes on a Solaris server?
- A . networker start
- B . ./networker
- C . nsradmin
- D . nsrd
What is the command line alternative to perform a query and generate a report similar to the reports generated within the EMC NetWorker Management Console (NMC)?
- A . gstclreport
- B . mminfo
- C . savefs
- D . ebreport backup
In EMC NetWorker, what enables users to browse their backups for files from a particular point-in-time?
- A . Client file index
- B . Resource directory
- C . Media database
- D . GST database
Which daemon supports remote execution requests for backup requested by EMC NetWorker Management Console?
- A . nsrfsra
- B . nsrexecd
- C . nsrjobd
- D . nsrd
Which daemon is responsible for organizing backup data before it is written to the backup media?
- A . nsrmmd
- B . nsrmmgd
- C . nsrlcpd
- D . nsrjobd
Refer to the exhibit.
How many nsrmmd processes are running on each remote storage node?
- A . 4
- B . 5
- C . 1
- D . 9
Refer to the exhibit.
How many nsrlcpd processes are running on the EMC NetWorker server?
- A . 0
- B . 1
- C . 2
- D . 9
What is an EMC NetWorker host ID called in a clustered EMC NetWorker server?
- A . Composite hostid
- B . Combined hostid
- C . Concatenated hostid
- D . Cluster hostid
An EMC NetWorker administrator wants to determine the RPC port range for a host.
Which directory contains this information?
- A . nsrladb
- B . catalogs
- C . jobsdb
- D . nsrdb
You are deleting save sets manually from the EMC NetWorker server using CLI commands. You receive an error that the database update has failed.
Which process should you verify is running on the EMC NetWorker server?
- A . nsrmmdbd
- B . nsrmmgd
- C . nsrjobd
- D . nsrindexd
Which tool is available to help determine and track source capacity usage in an EMC NetWorker environment?
- A . EMC AMP Utility
- B . EMC NetWorker License Manager
- C . nsradmin
- D . nsrlic
A company is running an EMC NetWorker server on a UNIX platform and wants to monitor backup operations from the UNIX command line.
Which utility can be used?
- A . nsrwatch
- B . nsradmin
- C . nsrinfo
- D . nsralist
On an EMC NetWorker Client, which command can be used to backup local data?
- A . save
- B . savepsm
- C . nsrsnap_vss_save
- D . nsrndmp_save
What is the first step that occurs during a client initiated backup?
- A . Save program generates one save stream of data
- B . Save program connects to nsrmmd
- C . Save program initiates a connection to nsrindexd
- D . nsr daemon sends information to EMC NetWorker server
An Administrator has deployed the EMC NetWorker server software with clustering. There are 50 clients and an autochanger with 4 drives controlled by a remote storage node.
What is the path of the backup data from the client to the media?
- A . Client C> Storage Node C> Media
- B . Client C> Media
- C . Client C> Cluster Server C> Media
- D . Client C> Cluster Server C> Storage Node C> Media
By default, the EMC NetWorker bootstrap reports are generated and sent automatically to the backup administrator.
Which configuration change is required to redirect the reports to the printer?
- A . Modify the action attribute of the bootstrap notification
- B . Append all bootstrap information to savegroup completion report
- C . Configure a local standalone device resource
- D . Remote administration permission needs to be configured
You are logged in to your Windows-based EMC NetWorker server and are attempting to manually run a backup group on the EMC NetWorker Management Console. You are receiving an error when attempting to manually start the group What is the most likely reason for the error?
- A . Your user id does not have system administrator privileges.
- B . You cannot manually start backups from the EMC NetWorker Management Console.
- C . The backup group is disabled on the EMC NetWorker Server.
- D . You must run the group backup from the command line.
You are backing up a group of clients that have varying schedules. Using the EMC NetWorker Administration interface, you need to perform a full backup of all clients in that group.
How would you ensure that a full backup is performed for a client when it is backed up during the next save group execution?
- A . Set an override level in the backup schedules to Full in the next date
- B . Change the group level to Override
- C . Uncheck the Force incremental option in the group resource Advanced tab.
- D . Create a staging resource called full and set the destination pool to full.
A user on the EMC NetWorker client wants to initiate a backup of selected files. At a minimum, which components must be configured before the backup can succeed?
- A . Client resource, group resource, device resource, labeled volume for the device
- B . Save set, save group, schedule
- C . Client resource, device resource, clone resource
- D . Advanced file type device, client resource, labeled volume for the device, staging policy
An EMC NetWorker administrator notices that clients are being backed up one at a time, even though they are scheduled to start simultaneously.
What may be a cause of this?
- A . Server parallelism is set to 1
- B . There is only one volume labeled
- C . Client parallelism is set to 1
- D . There is only one pool configured
An EMC NetWorker administrator wants to perform backup of an application server only if a certain number of transaction logs have been reached.
What type of backup needs to be performed?
- A . Probe-based Backup
- B . Scheduled Backup
- C . Client initiated Backup
- D . Incremental Backup
After installing EMC NetWorker server software, which resource needs to be created, at a minimum, before performing a backup?
- A . Device
- B . Schedule
- C . Group
- D . Policy
After initiating a manual save, you receive the following error message:
– 39078
– Save
– SYSTEM error: manual saves are not enabled
What must you check to do a manual save?
- A . EMC NetWorker Server properties
- B . save syntax
- C . Run savegrp before run save
- D . Modify client access list and grant access for all clients
An EMC NetWorker server has two user defined pools, Pool A and Pool B. Pool A has its "Clients" attribute set to "Client A" while the other attributes are unset. Pool B has its "Groups" attribute set to "sales" and "Levels" attribute set to "full" and other attributes unset.
If a save set is generated from Client A from the "sales" group using a full level backup, which pool will the data be sent to?
- A . Pool B
- B . Pool A
- C . Bootstrap pool
- D . Default Pool
An EMC NetWorker server has been configured to stage an adv_file type device upon reaching a high water mark of 80%. After the staging begins, what rule determines when the staging process ends?
- A . The capacity must fall below the low water mark
- B . The capacity must fall below the high water mark
- C . The adv_file type device must be empty
- D . The predefined amount of data is moved
Which option for cloud backup devices allows limiting the bandwidth that EMC NetWorker consumes for cloud operations during specified periods of time?
- A . Throttling
- B . Quality of Service
- C . Virtual Provisioning
- D . Compression
In an EMC NetWorker environment, which two ports will nsrexecd always try to listen on?
- A . 7937, 7938
- B . 9301, 9302
- C . 9000, 9001
- D . 8080, 8081
Consider the EMC NetWorker directive:
<< / >>
+compressasm: .
<< /export/home >>
forget
ignore
What is the result of this directive?
- A . Nothing under /export/home is compressed.
- B . Only files under /export/home are compressed.
- C . All .nsr files under /export/home are obeyed.
- D . Nothing under /export/home is backed up.
An EMC NetWorker administrator wants to prevent tapes from staying mounted after backups complete.
Which parameter must be set?
- A . Idle device timeout
- B . Poll interval
- C . Unload sleep
- D . Eject time
On a given EMC NetWorker host, what does the server’s file define?
- A . Server(s) that can back up the host
- B . User(s) allowed to log in remotely to that host
- C . Storage node(s) to which backups are sent
- D . Server(s) that can administer the host
If a Level 5 backup is performed for an EMC NetWorker client, at what level is its Client File Index backed up?
- A . 5
- B . Incremental
- C . Full
- D . 9
If an incremental backup is performed for an EMC NetWorker client, at which level is its Client File Index backed up?
- A . 9
- B . 1
- C . Full
- D . Incremental
What is a characteristic of EMC NetWorker volume cloning?
- A . Only save sets beginning on the volume are cloned.
- B . The cloned volume results in a complete mirror of the source volume.
- C . Only save sets beginning and ending on the volume are cloned.
- D . All save sets on the volume are cloned.
ClientA is a client in an EMC NetWorker environment. There are two EMC NetWorker servers, ServerA and ServerB. There is also one storage node, StorageNodeA. You noticed that there are no entries in the / nsr/res/servers file on ClientA.
Which system(s) is(are) allowed to back up data from ClientA?
- A . Any EMC NetWorker server
- B . ServerA only
- C . Any EMC NetWorker server, using StorageNodeA
- D . No systems are allowed to back up ClientA
What is the EMC NetWorker nsraddadmin command used for?
- A . Adding administrators to EMC NetWorker
- B . Adding new EMC NetWorker clients
- C . Allowing EMC NetWorker Servers to back up specific clients
- D . Adding new EMC NetWorker Storage Nodes
What command option can be used to test connectivity and simulate the backup on an EMC NetWorker client without backing up the data?
- A . save -n
- B . save -p
- C . save -k
- D . save -i
Which EMC NetWorker process manages the media database?
- A . nsrmmdbd
- B . nsrmmgd
- C . nsrmmd
- D . nsrd