Which key component within EMC XtremIO uses a proprietary algorithm dedicated to fast rebuilds of data?
- A . XDP
- B . D@RE
- C . RAID-DP
- D . eMLC
Which key components within EMC XtremIO provide an enterprise grade of high availability?
- A . Data-at-Rest Encryption and Snapshots
- B . XtremIO Data Protection and Snapshots
- C . Thin provisioning and Data-at-Rest Encryption
- D . In-line Data Deduplication and Compression
A company is running large databases demanding many copies of production databases on-demand with massive consolidation of dev/test application workloads.
They are looking for a solution that addresses their specific needs without high storage costs or a larger storage footprint.
Which EMC XtremIO features address their needs?
- A . Inline Deduplication and compression
- B . High IOPS and ease of use
- C . Ease of use and efficiency
- D . Low latency and data protection
What is used to distribute the data between X-Bricks in a 4 X-Brick cluster?
- A . InfiniBand
- B . iSCSI
- C . FC
- D . FCoE
Which protocols are supported by XtremIO for host connectivity?
- A . FC and iSCSI
- B . NFS and FC
- C . iSCSI and FCoE
- D . FCoE
You have a dual X-Brick cluster in your data center. You have six drive failures in one of your X-Bricks.
How many drives can you lose in your second X-Brick until service is stopped?
- A . 2
- B . 6
- C . 8
- D . 12
What is a main characteristic of volume storage provisioning in EMC XtremIO?
- A . Thin provisioned by default
- B . Garbage collection
- C . 4 KB allocation granularity
- D . Auto defragmentation
What is one of the main characteristics of volume storage provisioning in EMC XtremIO?
- A . Increased Write Amplification (WA)
- B . Garbage collection
- C . Auto defragmentation
What is a characteristic of Data-at-Rest Encryption in EMC XtremIO?
- A . Prevents unauthorized access in the event of media theft or loss
- B . Encryption permanently enabled by default
- C . Authentication Key PIN only used to lock SSD encryption
- D . Requires RSA Key Manager
What is a characteristic of snapshot functionality in EMC XtremIO?
- A . Can take snapshots from any source volume or snapshot
- B . All snapshot operations are run on SSD
- C . Supports only read-write snapshots
- D . Snapshots require reserved storage space
Two XtremIO clusters are located 200 miles apart with latency less than 5 ms. What should be the mode of replication using RecoverPoint appliances?
- A . Asynchronous with snapshot
- B . Synchronous with snapshot
- C . Synchronous and Asynchronous with snapshot
- D . Snapshot only
What methods are available to replicate XtremIO volumes to XtremIO or non-XtremIO arrays?
- A . RecoverPoint for VM with XtremIO RecoverPoint with XtremIO RecoverPoint and VPLEX with XtremIO
- B . RecoverPoint with XtremIO RecoverPoint for VM with XtremIO RecoverPoint/CL
- C . RecoverPoint and VPLEX with XtremIO RecoverPoint for VM with XtremIO RecoverPoint/SE
- D . RecoverPoint with XtremIO RecoverPoint/SE RecoverPoint/CL
Which 10 TB X-Brick cluster configurations are supported?
- A . 1, 2, and 4
- B . 1 only
- C . 1 and 2 only
- D . 2 and 4 only
What enables the aggregation of RAM between Storage Controllers in an XtremIO cluster?
- A . RDMA
- B . XDP
- C . MIBE
- D . LCC
What are the hardware specifications for a GEN3 Storage Controller?
- A . 10 cores, 2.4 GHZ CPU, and 512 GB RAM
- B . 8 cores, 2.4 GHZ CPU, and 512 GB RAM
- C . 10 cores, 2.4 GHZ CPU, and 1TB RAM
- D . 10 cores, 3.0 GHZ CPU, and 512 GB RAM
How many PDP and PDU are in one EMC factory 44U rack?
- A . 2 PDP; 2 PDU
- B . 4 PDP; 4 PDU
- C . 6 PDP; 6 PDU
- D . 8 PDP; 8 PDU
EMC installed a 4 X-Brick cluster in a customer’s Data Center.
How many PDPs need to be connected to an electricity source in order to adequately supply power to all PDUs of this cluster?
- A . 2
- B . 4
- C . 6
- D . 8
You are preparing to install a new XtremIO cluster. What software may be required for you to perform the installation?
- A . XtremIOstorage controller rescue image
XtremApp software bundle - B . XtremIO Technician Advisor XMCLI Client
- C . XtremIO Technician Advisor XMS rescue image
- D . XMS VHD file XtremApp software bundle
Where can network and firewall requirements be found?
- A . Site Preparation Guide
- B . Pre-Installation Checklist
- C . Installation Summary Form
- D . Hardware Installation and Upgrade Guide
Where can site planning and other product related documentation be found?
- A . SolVe Desktop
- B . powerlink.emc.com
- C . xtremio.com
- D . Procedure Generator
Where can site planning and other product related documentation be found?
- A . support.emc.com
- B . powerlink.emc.com
- C . xtremio.com
- D . Procedure Generator
In a dual X-Brick cluster, how many Storage Controllers are directly powered by the rack’s PDUs?
- A . 0
- B . 1
- C . 2
- D . 4
In an 8 X-Brick cluster, how many Storage Controllers are directly powered by the rack’s PDUs?
- A . 0
- B . 4
- C . 8
- D . 16
A new factory supplied XtremIO cluster has just arrived at a customer site.
For what is the first 1U left empty?
- A . Optional physical XMS
- B . Power cabling
- C . ESRS Server
- D . Battery Backup Unit
When racking an X-Brick cluster that requires InfiniBand switches, why do you have to leave a 1U space between the switches?
- A . Power cabling
- B . SAS cabling
- C . InfiniBand cabling
- D . COM cabling
Which Storage Controller port is assigned a public IP address?
- A . MGMT-1
- B . MGMT-2
- C . MGMT-3
- D . MGMT-4
What is the minimum percentage of charge of the BBUs required before the cluster can be started for the first time?
- A . 70%
- B . 80%
- C . 90%
- D . 100%
If an XtremIO cluster has been shut down as a result of a power loss to the data center, how should you proceed with restoring cluster service?
- A . Cluster services automatically restart when power is restored to the data center. No administrative action is needed.
- B . Cluster services must be manually restarted using the start-cluster XMCLI command once power is restored to the data center.
- C . The Battery Backup Units, Storage Controllers, and XMS must be rebooted in order for cluster services to be restored.
- D . Only the XMS and Storage Controllers must be rebooted in order for cluster services to be restored.
Which IP address on the physical XMS should you connect to perform initial configuration?
- A . 10.0.0.1
- B . 128.221.252.2
- C . 169.254.254.1
- D . 192.168.0.1
You have asked a customer to download and deploy the XMS OVF template in advance of an implementation engagement. The customer is new to EMC and does not know from where to download the needed file.
Where should you direct the customer so that they can complete this task?
- A . support.emc.com
- B . powerlink.emc.com
- C . community.emc.com
- D . xtremio.com
An XMS is being configured. Other than the standard IP address information, what other configuration parameter is required when ESRS will be used?
- A . Domain name
- B . NTP server name
- C . DHCP server name
- D . Storage Controller name
Which method is used to transfer the required software package to the XMS for installation?
- A . SCP
- B . USB port
- C . FTP
- D . Update Manager
You have asked the customer to download and deploy the XtremIO Management Server (vXMS) OVF template into their environment. The customer asks you what the recommended storage deployment requirements are.
How should you respond?
- A . 900 GB thin provisioned
- B . 80 GB thick provisioned
- C . 900 GB thick provisioned
- D . 80 GB thin provisioned
How much memory is required to deploy virtual XMS?
- A . 2 GB
- B . 4 GB
- C . 8 GB
- D . 16 GB
An enterprise is planning to deploy Virtual XMS for managing a multi-cluster XtremIO.
What is a consideration for this deployment?
- A . Virtual XMS user accounts can manage all clusters
- B . Virtual XMS is not supported for multi-cluster management
- C . Multiple user accounts must be created for each managed cluster
- D . Virtual XMS supports a maximum of four clusters
An IT service provider is planning to deploy two XtremIO clusters with four X-Bricks each. Both the clusters should be managed by dedicated storage specialists.
What is a consideration for this deployment?
- A . One XMS must be deployed for each cluster
- B . Physical XMS is not supported for multi-cluster management
- C . 8912 volumes can be managed by XMS from all clusters
- D . Only 256 volumes are supported per Consistency Group
Which XMCLI command should be executed on the XMS to form an XtremIO cluster?
- A . create-cluster
- B . add-cluster
- C . modify-clusters-configuration
- D . modify-xms-parameters
You have successfully completed the initialization of an XtremIO cluster. You run the
showstorage-controllers-info XMCLI command.
What are the expected values of State and Conn-State for all the Storage Controllers?
- A . State: healthy Conn-State: connected
- B . State: active Conn-State: connected
- C . State: healthy and enabled Conn-State: healthy and enabled
- D . State: active and enabled Conn-State: active and enabled
Which user account should be used to place software images on the XMS in preparation for initializing a cluster?
- A . xmsupload
- B . xmsadmin
- C . admin
- D . xinstall
You are in the process of implementing a new cluster and have experienced an issue during initialization. To assist EMC Global Technical Support with their investigation, you are requested to collect a set of logs.
What should you use to generate the required log file bundle?
- A . Easy-Install CLI
- B . XMCLI
- C . SOAP
- D . REST