Which models represent the latest additions to the PowerMax family?
- A . PowerMax 2000 and 8000
- B . PowerMax 2500 and 8500
- C . PowerMax 3000 and 9000
- D . PowerMax 3500 and 9500
What are the primary methods to access PowerMax 2500 and 8500 arrays? (Choose two)
- A . Through the Service Processor (SP)
- B . Using the Control Station (CS) App
- C . Via direct hardware interface
- D . Through a dedicated management network
In terms of system reliability, how does PowerMax 8500 compare to PowerMax 2500?
- A . Higher fault tolerance
- B . Similar fault tolerance
- C . Similar fault tolerance
- D . Fault tolerance dependent on configuration
Which software tool must be used by field personnel to start system management scripts on PowerMax systems?
- A . Solutions Enabler
- B . Simplified Symmwin
- C . Symmwin
- D . Unisphere for PowerMax
Refer to the exhibit.
What does "DRIVE-A:1" represent?
- A . Drive type and spare drive location
- B . Drive type and number
- C . Physical location of the drive in the DAE
- D . Physical location of the drive in the bay
Regarding hardware components, which of the following is true for both PowerMax 2500 and 8500? (Choose two)
- A . They both use NVMe SSDs exclusively
- B . Both models have identical CPU configurations
- C . Both support flexible front-end connectivity options
- D . They share the same physical chassis design
What is a unique feature of PowerMaxOS 10 compared to earlier versions?
- A . Support for NVMe over Fabrics (NVMe-oF)
- B . Support for traditional HDDs
- C . Integration with older EMC storage systems
- D . Reduced flash storage capabilities
Which model is more suitable for environments with high scalability and performance needs?
- A . PowerMax 2000
- B . PowerMax 8000
- C . PowerMax 2500
- D . PowerMax 8500
Which of the following is a key feature of the Simplified Symmwin tool for FRU procedures in PowerMax systems?
- A . It provides an automated scripting interface
- B . It allows for remote FRU management
- C . It simplifies the procedure by providing step-by-step guidance
- D . It is used for non-Dell EMC hardware integration
What distinguishes PowerMaxOS 10’s machine learning capabilities from earlier versions?
- A . Basic data analysis
- B . Predictive storage management
- C . Predictive storage management
- D . Basic user interface improvements
Which two features are included in the PowerMax 2000 and 8000 Essentials software package?
(Select 2)
- A . SRDF
- B . PowerPath
- C . D@RE
- D . SnapVX
- E . AppSync Starter
Which PowerMax model offers the best solution for businesses prioritizing energy efficiency?
- A . PowerMax 2000
- B . PowerMax 8000
- C . PowerMax 2500
- D . PowerMax 8500
What type of RAID configuration does PowerMax 8500 support?
- A . RAID 1 and RAID 5 only
- B . RAID 6 and RAID 10 only
- C . Flexible RAID configurations, including RAID 5, 6, and Diamond
- D . Only proprietary Dell EMC RAID configurations
What state is the battery in when the Li-Ion SPS battery position indicator is yellow?
- A . Engaged
- B . Parked
- C . Off
- D . Connected
How do PowerMax 8500’s connectivity options enhance data center integration?
- A . Standard Ethernet connections
- B . High-speed Fibre Channel connections
- C . Wireless connectivity options
- D . Wireless connectivity options
- E . Legacy SCSI connections
Which type of RAID protection is intended only for small configurations in PowerMax 2500 arrays?
- A . RAID 5 (4+1)
- B . RAID 1 (1+1)
- C . RAID 6 (12+2)
When handling FRUs in PowerMax systems, what is the recommended practice to prevent electrostatic discharge (ESD)?
- A . Use of an ESD wrist strap
- B . Keeping FRUs in anti-static bags until installation
- C . Working on a grounded anti-static ma
- D . All of the above
Upon logging in to Simplified Symmwin, which View Blocks are displayed?
- A . Site Info and System Management
- B . Tasks and Site Info
- C . System Management and Replacement Logs
- D . Site Note and Tasks
Which two front-end emulations are available for PowerMax 8000 arrays?
(Select 2)
- A . DX
- B . FA
- C . DN
- D . SE
Where must the replacement procedure be started when a disk drive must be replaced in a PowerMax 8000 system?
- A . Symmwin/Tasks
- B . Simplified Symmwin/System Management
- C . Symmwin/System Management
- D . Simplified Symmwin/Tasks
Refer to the exhibit:
During a maintenance activity, support requested that the power supply PWS-A2 be replaced to resolve an issue with a PowerMax 8500.
In which position would the power supply be replaced?
- A . 4
- B . 1
- C . 2
- D . 3
What is a key advantage of using Simplified Symmwin for FRU procedures in PowerMax systems?
- A . It eliminates the need for manual intervention
- B . It provides guided, step-by-step instructions
- C . It automatically updates the system firmware
- D . It performs system backups before any procedure
When replacing a FRU in PowerMax systems, what is a crucial step?
- A . Checking the power supply units
- B . Verifying the compatibility of the new FRU
- C . Reconfiguring the entire system
- D . Updating the system’s BIOS
Refer to the exhibit:
A service engineer was asked to replace both Zone A power supplies on a DME.
Which power supplies in the graphic above must be replaced?
- A . 2 and 4
- B . 3 and 4
- C . 1 and 3
- D . 1 and 2
What are the two software packages offered for PowerMax 2000 and 8000 arrays?
- A . Enterprise and Inclusive
- B . Essentials and Enterprise
- C . Essentials and Pro
- D . Inclusive and Pro
What color is the ejector tab that locks the M2 boot drive in place on a PowerMax 2500 node?
- A . Blue
- B . Orange
- C . Black
- D . White
Which system uses InfiniBand switches?
- A . PowerMax 2000 single-engine
- B . PowerMax 2000 dual-engine
- C . PowerMax 8000 single-engine
- D . PowerMax 8000 multi-engine
What is the primary purpose of the Simplified Symmwin tool in PowerMax maintenance?
- A . To manage network configurations
- B . To facilitate FRU replacement procedures
- C . For regular software updates
- D . For remote system monitoring
How do PowerMax 2000 and 8000 models differ in terms of local RAID options?
- A . They offer the same RAID options
- B . PowerMax 8000 offers more flexible RAID configurations
- C . PowerMax 8000 offers more flexible RAID configurations
- D . PowerMax 8000 supports only RAID 5 and 6
Which tool can be used to switch the IP address of a service laptop to physically connect to a PowerMax 2500 or 8500?
- A . IP Switcher
- B . CS SSH Tunnel Manager
- C . Remotely Anywhere