Which option for cloud backup devices allows limiting the bandwidth that EMC NetWorker consumes for cloud operations during specified periods of time?
- A . Throttling
- B . Quality of Service
- C . Virtual Provisioning
- D . Compression
Which are NetWorker modules?
- A . NMSQL and NMSAP
- B . NMM and NDMP
- C . NMDA and NMMEDI
- D . NMC and NSM
A customer has an Oracle 11g database running on a RAC cluster with ASM. It occupies approximately 5 TB on a Symmetrix DMX. They have an RTO of four hours. They intend to implement PowerSnap with EMC NetWorker version 7.6 to back up the BCVs using RMAN scripts and a proxy host.
What prevents this implementation from being successful?
- A . PowerSnap is not supported on Oracle 11g with EMC NetWorker 7.6.
- B . BCVs cannot be mounted to a proxy host with a RAC cluster.
- C . RTO of four hours cannot be accomplished.
- D . ASM does not support proxy hosts.
What is a benefit of using vendor-specific API during a Dell EMC NetWorker Module backup?
- A . Online backups can be used
- B . Save set recovery is supported
- C . Offline backups can be used
- D . Persistent snapshots are supported
An administrator has been asked to assess the options available from the NetWorker backup application.
The objectives are:
– Greater efficiency with virtualized and pooled resources
– IT resources can be provisioned on-demand and easily returned to the resource pool
– Quickly allocate computing resources to meet business demands
– Enhanced security and protection of information assets
What should be recommended to the client?
- A . NetWorker Virtual Edition and CloudBoost virtual;
- B . On-prem NetWorker and use CloudBoost Virtual Appliance for long-term retention
- C . On-prem NetWorker with CloudBoost Virtual Appliance to improve recovery time objectives
- D . Complete Data Protection Suite as Infrastructure-as-a-Service
A backup administrator is deploying an extended client on a Linux host.
The following error is observed during the installation:
Cannot contact a portmapper on port 7937.
What is the recommended action to resolve this issue?
- A . Install the lgtoclnt-[version].rpm package and reinstall the Extended client.
- B . Install the lgtoserv-[version] rpm package and reinstall the Extended client.
- C . Install the lgtonode-[version].rpm package and reinstall the Extended client.
- D . Install the Lgtobbb-[version].rpm package and reinstall the Extendd client
An EMC NetWorker customer wants to clone save sets from an EMC Disk Library (EDL) to a physical tape library. The customer requires full catalog tracking with minimum SAN utilization.
Which solution best satisfies these requirements?
- A . Configure the backup server to perform the clone operation.
- B . Configure the embedded storage node to handle the clone data flow.
- C . Set up a second data zone with local devices dedicated to cloning.
- D . Use the autoarchive feature on the EDL.
Which daemon supports remote execution requests for backup requested by EMC NetWorker Management Console?
- A . nsrfsra
- B . nsrexecd
- C . nsrjobd
- D . nsrd
An EMC NetWorker customer wants to exclude all .jpg files from backups for all Solaris hosts. Backups are initiated from both the client and server.
How should this be enforced?
- A . Client-side directive
- B . AES directive
- C . NetWorker user local directive
- D . Server-side directive
Which database applications does EMC NetWorker Module for Databases and Applications provide backup support?
- A . IBM DB2, Informix, Oracle, and MySQL
- B . IBM Domino, Sybase, Microsoft Exchange, and Oracle
- C . Oracle, Microsoft SQL and Exchange, and Informix
- D . IBM DB2, MySQL, Sybase, and Microsoft Exchange
Which EMC NetWorker command can be used to determine the number of records in the client file index for each client?
- A . nsradmin
- B . mminfo
- C . nsrls
- D . nsrinfo
On a Linux server, what is used to manage the Dell EMC Common Licensing Platform server?
- A . lmgrd
- B . LMTools
- C . nsrcap
- D . NMC
If a NetWorker backup is using a dedicated storage node, what is responsible for storing the tracking information?
- A . NetWorker Server
- B . NetWorker Storage Node
- C . AuthC
- D . NMC
A backup administrator is testing a block-based backup of a Linux server that is supported by Dell NetWorker, and the backup fails.
What is the cause of the failure?
- A . LVM configuration is used.
- B . AFTD target device is used.
- C . BBB package is not installed.
- D . Block-based backup is not supported on Linux.
Which technology is used to perform incremental Exchange Server backups using NMM?
- A . Volume Shadow Copy Services
- B . Block Based Backup
- C . Resilient Change Tracking
- D . Virtual Device Interface
A company recently deployed workloads in Amazon Web Services (AWS) and preferred to use Dell EMC NetWorker for unified backup and recovery. The system administrator needs to deploy a virtual CloudBoost appliance in VMware.
What needs to be done prior to the deployment?
- A . Download the .OVA file and make it accessible from the computer
- B . Ensure that the proper EC2 Instance Type is selected and configured
- C . Ensure that CloudBoost AMI is available in AWS Marketplace
- D . Enter the AWS access key ID and AWS secret access key
Which EMC NetWorker software component is responsible for storing metadata in the form of hash IDs for a deduplication backup?
- A . Storage node
- B . NetWorker client
- C . Deduplication node
- D . NetWorker server
What is recommended when configuring EMC NetWorker module clients?
- A . Assign all module clients to the same group and pool
- B . Assign all module clients to the same group and schedule
- C . Use the same group for application and file system backups of module clients
- D . Use the same pool for application and file system backups of module clients
Which databases can be backed up using a NetWorker with NMM?
- A . MongoDB and MySQL
- B . Microsoft SQL and Exchange
- C . PostgreSQL and MongoDB
- D . Oracle and Microsoft SQL
A backup administrator is configuring a NetWorker snapshot backup. They find that the return code of the probe phase is "0".
What is the meaning of this code?
- A . A client backup is not required
- B . A user-defined script is not found
- C . A client backup is required
- D . The probe phase has failed
In a Dell EMC NetWorker environment, the daily scheduled backup was started. However, the backup failed without mounting the device.
What is a possible reason for the failure?
- A . Volumes labeled in the required pool are appendable
- B . Protection group is not selected on the pool
- C . Devices do not have volumes that match the pool required by the backup request
- D . Tape devices attached to the NetWorker server are showing recyclable
What is integrated with NMDA to provide snapshot-based protection for DB2?
- A . PowerSnap
- B . SnapImage
- C . VSS
- D . VMware
A backup administrator needs to provide Block Based Backup (BBB) support for a RHEL NetWorker client.
Which is an appropriate NetWorker BBB software package?
- A . lgtobbb-nw*.deb
- B . lgto-block-based*.rpm
- C . lgto-block-based*.deb
- D . lgtobbb-nw*.rpm
You have been tasked to protect a newly configured Microsoft SQL server residing within a two node cluster. The following requirements must be met: Backups must be performed daily. All data must be transmitted over the LAN. Hot backup must be performed automatically regardless of which node the virtual server resides on at the time of backup.
What software is required to achieve this?
- A . NetWorker Module for Microsoft Applications and SnapImage
- B . NetWorker PowerSnap Module only
- C . NetWorker Module for SQL only
- D . NetWorker Module for SQL and PowerSnap
An administrator needs to create a point-in-time copy application host data and retain the backup on the storage array.
What type of backup should be used?
- A . Block-based Backup
- B . Snapshot backup
- C . NDMP backup
- D . Probe-based backup
What is a consideration for a block based backup (BBB) installation and configuration?
- A . Client Direct should be disabled in the client configuration
- B . Checkpoint restart and standard EMC NetWorker directives are not supported
- C . Only Data Domain backup target devices are supported
- D . Linux BBB package (lgtobbb) is required for full and incremental support
Which applications does Dell EMC NetWorker Snapshot Management support?
- A . DB2, SQL, and SAP with SQL
- B . Exchange, SQL, and SharePoint
- C . Exchange, SQL, and Hyper-V
- D . DB2, Oracle, and SAP with Oracle
In a Dell EMC NetWorker environment, an administrator is planning a backup strategy for both traditional and module backups.
What should be considered to avoid backing up the same data twice?
- A . Exclude database or application data from file system backups
- B . Schedule backups during low performance demands on the application server
- C . Ensure file system and database backups for the same client run at the same time
- D . Configure one workflow for both database and application data
What is a consideration when deploying a Dell EMC NetWorker client in a clustered environment?
- A . NetWorker software must be installed on shared storage accessible to all hosts
- B . NetWorker software must be installed on shared storage accessible to all hosts
- C . Only the virtual service needs to be defined as a client resource
- D . "All" save set will back up everything including shared data volumes from all nodes
What is the recommended media type for the device that stores the metadata in the form of hash IDs for EMC NetWorker deduplication backups?
- A . adv_file
- B . file
- C . Tape
- D . Atmos COS
A storage administrator backs up an Exchange server to an EMC Data Domain system. The Data Domain system is configured as an advanced file device. The administrator now wants to create a copy of the backup and send it to tape.
The backup job completed at 8pm. The administrator wants the copy to be created at 9pm.
Which option should be used?
- A . Use the Scheduled Cloning attribute to schedule a clone job to start at 9 pm.
- B . Run the nsrclone command at 8 pm and the second copy will be directed to tape at 9 pm.
- C . Enable the "clones" attribute in the client’s group setting.
- D . From the Administration window, under Media select Save Sets and then the Query Save Set tab. Create clone copies of the backup at 8 pm.
Which target devices support Block Based Backup when Client Direct is enabled?
- A . CloudBoost, ProtectPoint devices and CloudBoost devices
- B . CloudBoost, DD Boost, and ProtectPoint devices
- C . DD Boost, CloudBoost, and Dell EMC Cloud Tier devices
- D . AFTDs, DD Boost, and CloudBoost devices
Which type of device is referred to as a BOOST device?
- A . Data Domain
- B . File Type
- C . Advance File Type
- D . Cloud
A storage administrator has configured a client for snapshot backups using EMC NetWorker Snapshot Management. The backup completed successfully and the administrator is now ready to restore the data.
Which type of restore will destroy all existing data onthe target application volume?
- A . Rollback
- B . Snapshot
- C . Restore from rollover
- D . Directed
A Dell EMC NetWorker solution will be implemented that consists of two NetWorker servers and a single NetWorker Management Console (NMC). The NMC will be installed on only one of the NetWorker servers.
To allow management of both servers from the NMC, which command must be executed and on which NetWorker server?
- A . nsraddadmin; server where NMC is not installed
- B . nsraddadmin; server where NMC is installed
- C . nsrauthtrust; server where NMC is installed
- D . nsrauthtrust; server where NMC is not installed
An EMC NetWorker customer wants to perform a complete backup of a SQL server with three databases.
Which save set name should be used?
- A . MSSQL:
- B . MSSQL:DB
- C . MSSQL:*
- D . MSSQL: ALLDB
Which type of NetWorker recovery automatically performs a point-in-time recovery?
- A . Block-based
- B . Browsable
- C . Directed
- D . Save set
What is used to configure and start the CLP license server service on a Linux host?
- A . nsrlic
- B . lmgrd
- C . LMTools
- D . NMC
A backup administrator has configured three clients for backup on a newly installed EMC NetWorker server. The administrator has configured a workflow to back up the clients at 6 P.M. each day.
The schedule specifies a synthetic full backup on Sunday and incremental backups the rest of the week. After two days, they notice that the client file indexes for these clients are not being backed up.
What is the reason for this issue?
- A . A device needs to be configured and mounted for the ‘Server db backup’ action
- B . NetWorker server has not been fully licensed yet
- C . The CFI and bootstrap are only backed up for full backups
- D . The override on the ‘Server backup’ workflow is set to level ‘Incremental’
Which target device types are supported by Dell EMC NetWorker block based backups?
- A . FTD and CIFS
- B . AFTD and Avamar
- C . AFTD and Data Domain
- D . Data Domain and Tape
An EMC NetWorker administrator wants to back up only the CFI and the bootstrap save sets.
Which command will achieve this requirement?
- A . savegrp -l full -O group name
- B . save -l full -O group name
- C . savegrp -i full -O group name
- D . save -i full -O group name
What is a characteristic of NMM Microsoft SQL VSS?
- A . Backup and recovery granularity is only available at the database level
- B . Directed recoveries can be performed only to different hosts
- C . Only databases in SQL simple recovery mode are supported
- D . Full and incremental backups are supported
What is the correct sequence of steps to configure Dell EMC NetWorker as a cluster-aware application for Linux clients?
A storage administrator wants to configure a virtual tape library device within EMC NetWorker. In addition, the administrator wants the backup data deduplicated.
Which other EMC product is required?
- A . Data Domain
- B . VPLEX
- C . RecoverPoint
- D . Avamar
What is a characteristic of EMC Net Worker’s Open Tape Format (OTF)?
- A . Allows multiplexed, heterogeneous data to reside on the same media
- B . Controls the number of save streams a client backs up simultaneously
- C . Collects information for pools and index entries to allow data segregation
- D . Identifies the ports used by Net Worker to allow data to be saved through a firewall
A backup administrator notices that an EMC NetWorker UNIX client takes a long time to complete the daily backup. After investigation, the administrator discovers the client has some large, disk-based file systems with a high daily change rate.
The client is currently configured as a dedicated storage node. The backup environment consists of a NetWorker server, NetWorker storage node, NetWorker deduplication node, and several DD Boost devices.
What can be done to speed up the backup for this NetWorker client without changing the file system?
- A . Enable Checkpoint Restart at the directory level
- B . Back up the client to the deduplication node
- C . Configure the client for parallel save streams
- D . Disable the Changed Block Tracking feature
An administrator added several new LDAP user accounts for backup configuration and monitoring tasks. The LDAP users have been authenticated in NetWorker Management Console (NMC).
What must be done so that these tasks can be performed on the Dell EMC NetWorker server?
- A . Add the user accounts to the ‘Users’ user group on the NMC server
- B . Add the user accounts to the ‘External roles’ field of the user groups on the NetWorker server
- C . Add the user accounts to the ‘Users’ field of the Security Administrators group on the NetWorker server
- D . Add the user accounts to the ‘Registrations’ resource on the NMC server
A backup administrator is protecting a VMware environment with Dell EMC NetWorker and Data Domain systems.
Which component serves as the Data Mover of the virtual machine backup data between the VMware datastore and Data Domain system?
- A . NetWorker storage node
- B . Data Domain System Manager
- C . VMware vSphere
- D . Networker vProxy appliance
A customer’s EMC NetWorker environment has a Solaris client that had been backing up without failing for several weeks.
The client has the following local mount points:
/
/usr
/home
/var
And two nfs mount points:
/mars/data1
/jupiter/data1
The save set was identified as "ALL" in the client resource. The client had crashed and was successfully rebooted the previous day. The first request for a restore for this client was submitted for the last night’s backup of /mars/data1/Monthly.doc and /jupiter/data1/Weekly.xls. The jupiter restore is successful but the mars data is not found and fails to be restored.
What is the most likely cause of this restore failure?
- A . /mars/data1 was not in the /etc/vfstab file and had not been backed up.
- B . The /nsr/res/servers file on mars is empty, prohibiting the restore.
- C . The nsrexecd was not running on mars, preventing the backup.
- D . The client save set was identified as ALL. ALL does not back up nfs mounts points.
An EMC NetWorker administrator configures an advanced file type device, setting the device target sessions to two, and max sessions to four.
How is data written to the advanced file type device?
- A . Each save set is written to a separate file.
- B . Each file written by the storage node contains up to four save sets.
- C . Four backup jobs will be multiplexed for every two files written to the device.
- D . Two save sets will be stored in each file.
A backup administrator wants to use an mminfo utility to run a query for several save sets from a NetWorker client running Windows 2019 However, they receive an error that the mminfo executable is not found.
What is the fastest way to resolve this issue?
- A . Install the NetWorker Extended Client package.
- B . Use an nsrinfo utility instead
- C . Open a case with Dell Support
- D . Use a Windows Explorer to find the mminfo.exe file
In EMC NetWorker, what is a benefit of using multiplexing with backups to tape?
- A . Reduced network traffic
- B . Improved restore times
- C . Reduced CPU utilization on backup client
- D . Improved backup device throughput
What is a characteristic of NMDA for MySQL backups?
- A . Scheduled and manual backups can be run using the NetWorker User for MySQL interface
- B . NMDA cannot delete the binary logs from the disk after completing a binary log backup
- C . NMDA interacts with the MySQL Enterprise Backup software through the MySQL SBT interface
- D . MySQL data and binary logs can be sent to separate backup pools during a single NMDA backup
A backup administrator is asked to install NWUI on a Linux-based non-NetWorker Server.
Which software package should be used?
- A . lgtoclnt-nw-19.2-0.x86_64.rpm
- B . lgtoxtdclnt-19.2-0.x86_64.rpm
- C . lgtonwui-19.2.x86_64.rpm
- D . lgtonwuiserv-19.2.x86_64.rpm
When a user logs into the Dell EMC NetWorker Management Console (NMC) server, what provides token-based verification of NMC and CLI users?
- A . AuthC
- B . External authentication
- C . nsrla
- D . nsradmin
Which EMC NetWorker feature provides the ability to back up an individual tablespace of a database?
- A . Granular backup
- B . Parallelism
- C . Online backup
- D . Client Direct
What is a feature of Replication to the Cloud?
- A . no on-premises infrastructure required
- B . fast restore from local cache copies using site cache
- C . fast restore from short-term on-premises copies
- D . greater efficiency with pooled resources
Refer to the exhibit.
How many nsrlcpd processes are running on the EMC NetWorker server?
- A . 0
- B . 1
- C . 2
- D . 9
Your customer is running an EMC NetWorker 7.6 server and wants to upgrade their clients running NetWorker 7.4.
What are two ways to do this remotely from the NetWorker server?
- A . Software Administration Wizard and nsrpush
- B . Copy with Clients and nsrpush
- C . Software Administration Wizard and nsrclient
- D . Copy and nsrpush
A Dell EMC NetWorker administrator has a requirement for a CloudBoost solution that provides the following:
– No on-premises infrastructure is required
– Low-cost cloud object storage for all backup copies
– Deduplication, encryption, and compression at the source
Which CloudBoost use case meets these requirements?
- A . Replication to the cloud
- B . Backup to the Cloud Tier
- C . Backup to the cloud
- D . Backup within the cloud
In an EMC Net Worker environment, regardless of what ports the service port range is set to, which two ports will nsrexecd always try to listen on?
- A . 7937, 7938
- B . 9301, 9302
- C . 4711, 4712
- D . 8080, 8081
When recovering data from the Cloud Tier with Dell EMC networker, how long is the data retained on the Data Domain device?
- A . 3 days
- B . 7 days
- C . 10 days
- D . 14 days
An administrator installed and configured a NetWorker server 30 days ago. The customer is concerned the trial period will end soon.
What should the administrator tell the customer?
- A . NetWorker will operate for 90 more days with a trial license
- B . NetWorker will operate for 60 more days with a trial license
- C . A permanent license must be applied immediately
- D . NetWorker will operate indefinitely with a trial license but without support
What is a characteristic of a Dell EMC NetWorker online database backup?
- A . Uses a vendor specific API to extract data
- B . Shuts down the database before backing up the data
- C . Used only in an active/passive environment
- D . Copies the data to a temporary location before backup
Which method(s) can you use to display a list of unlabeled tape volumes in EMC NetWorker?
- A . EMC NetWorker Administration Devices window only
- B . mminfo and EMC NetWorker Administration Devices view
- C . EMC NetWorker Administration Media view only
- D . mminfo and EMC NetWorker Administration Media window only
What happens when an EMC NetWorker AFTD becomes full while backups are running?
- A . Backups are paused; aborted and expired save sets are deleted.
- B . Backups are paused; the oldest save sets are staged.
- C . Backups fail; simultaneous restore jobs continue.
- D . Backups span to another volume.
What is the purpose of EMC NetWorker’s retention policy?
- A . Determines the minimum length of time save set entries are maintained in the media database
- B . Determines the minimum length of time file entries are maintained in the CFI
- C . Indicates whether or not a save set is browsable
- D . Indicates when a media pool will be deleted
Which protocol is used when performing an EMC NetWorker backup to a cloud device?
- A . TCP
- B . UDP
- C . OST
- D . iSCSI
A backup administrator started the backup of a group containing five clients using the savegrp command from a command prompt on the NetWorker server.
Where will the tracking information for all save sets backed up in the group be stored?
- A . Media database
- B . Client File Index
- C . RAP database
- D . Jobs database
A backup administrator started the backup of a group containing five clients using the savegrp command from a command prompt on the NetWorker server.
Where will the tracking information for all save sets backed up in the group be stored?
- A . Media database
- B . Client File Index
- C . RAP database
- D . Jobs database
A backup administrator started the backup of a group containing five clients using the savegrp command from a command prompt on the NetWorker server.
Where will the tracking information for all save sets backed up in the group be stored?
- A . Media database
- B . Client File Index
- C . RAP database
- D . Jobs database
Be able to recover Microsoft application data from a persistent snapshot.
What is a recommended EMC Networker add-on module?
- A . EMC Networker Module for Microsoft Applications.
- B . EMC Networker Module for Databases and Applications.
- C . EMC Networker PowerSnap Module.
- D . EMC Networker Snaplmage Module.
A Dell EMC NetWorker administrator is unable to assign a protection group to a workflow. During the configuration, the drop-down does not list that group as a selection.
What is a possible reason for the missing group?
- A . Group is already assigned
- B . Group is disabled
- C . Group does not contain any clients
- D . Group has over 250 client resources
You have successfully backed up three SQL servers with EMC NetWorker Module for SQL.
What needs to be done to recover SQL data?
- A . Launch the EMC NetWorker User for SQL.
- B . Modify the browse time within the EMC NetWorker User GUI.
- C . Use Microsoft SQL server native tools to recover the data from EMC NetWorker.
- D . Modify the save set to include the SQL instance or database name.
In a Microsoft Windows environment, what is a characteristic of a bare metal recovery when using Dell EMC NetWorker?
- A . Can be used to restore individual files
- B . Can be used for recovery of networker server database
- C . Required when a host encounters a catastrophic failure
- D . Restores only the operating system
An EMC NetWorker backup administrator wants to use a single interface to monitor a data protection environment consisting of Avamar, Data Domain, and NetWorker. They are also looking for capacity planning information for the various components in the environment.
Which EMC tool is recommended?
- A . Data Protection Advisor
- B . Data Domain Management Console
- C . NetWorker Management Console
- D . Avamar Administrator Console
A NetWorker workflow is configured as a probe-based backup What actions must be included in the workflow?
- A . internal and metadata validation
- B . clone and probe and action only
- C . check connectivity and probe actions
- D . probe and backup actions
A customer is running an EMC NetWorker 7.6 server on a UNIX platform and wants to monitor backup operations from the command line.
Which utility can be used?
- A . nsrinfo
- B . nsrmmd
- C . nsrjb
- D . nsrwatch
A backup administrator has been asked to license a backup environment which consists of three NetWorker Datazones. Using a single License Server, how many license files are required?
- A . 1
- B . 2
- C . 3
- D . 6
Where is the Dell EMC Data Protection Extension plug-in installed?
- A . ESXi Host
- B . vRO Host
- C . vProxy Appliance
- D . vCenter Host
Which type of Microsoft SQL VSS backup is supported by NetWorker Module for Microsoft?
- A . Microsoft SQL database differential backups
- B . Microsoft SQL backup of individual filegroups
- C . Microsoft SQL transaction log backups
- D . Microsoft SQL individual database backup
The three primary types of EMC NetWorker hosts form an architecture/topology.
What is this called?
- A . EMC NetWorker Data Zone
- B . EMC NetWorker Storage Domain
- C . EMC NetWorker Storage Zone
- D . EMC NetWorker Cell
An administrator has installed and configured a NetWorker server 30 days ago. The customer is concerned the trial period ends soon.
What should the administrator tell the customer?
- A . NetWorker will operate indefinitely with a trial license but without support.
- B . A permanent license must be applied immediately.
- C . NetWorker will operate for 60 more days with a trial license.
- D . NetWorker will operate for 90 more days with a trial license.
When backing up a Lotus Domino database with EMC NetWorker Module for Databases and Applications, how is the Lotus Domino backup level determined?
- A . For scheduled backups, backup level is determined by the level specified in EMC NetWorker Schedules resource.
- B . For scheduled backups, backup level is determined by the NSR_BACKUP_LEVEL parameter in NMDA configuration file.
- C . For manual backups, backup level is determined by the level specified in EMC NetWorker Schedules resource.
- D . For manual backups, backup level is always Full by default and this can not be changed.
Which combination of simultaneous backups and recoveries is supported when using an advanced file type device in EMC NetWorker?
- A . Multiple backups and multiple recoveries
- B . Multiple backups and only one recovery
- C . Only one backup and multiple recoveries
- D . Only one backup and one recovery
Which command can be used to send message contents to a printer on a Windows NetWorker server?
- A . mail
- B . nsrlog
- C . nsrlpr
- D . smtpmail
An administrator experienced a power failure in their data center. After checking their Dell EMC Networker servers, the administrator discovered an error message on one of the Networker server.
The message indicates that the media database does not exist.
What is the recommended way to resolve any corruption in the database?
- A . Rename the old/nsr/mm directory and recover from the bootstrap save set
- B . Delete the old/nsr/mm directory and create a new bootstrap save set
- C . Allow Networker to recreate the new /nsr/res directory and create a new bootstrap save set
- D . Delete the old/nsr/res directory and create a new bootstrap save set
An EMC NetWorker administrator wants to allow multiple tenants to share a single NetWorker data zone without purchasing any additional licenses.
What solution will address the administrator’s needs?
- A . Restricted Data Zones
- B . NetWorker Snapshot Management
- C . Client Direct backups
- D . Cloud Optimize
Which daemon controls the library resources?
- A . nsrlcpd
- B . nsrctld
- C . nsrmmd
- D . nsrmmdbd
What is the function of Persistent Binding in an EMC NetWorker SAN environment?
- A . Prevent device target-id changes
- B . Prevent WWPN changes
- C . Prevent silent SCSI bus resets
- D . Prevent a tape label/barcode mismatch
An EMC NetWorker administrator on an UNIX terminal wants to monitor volume mount requests.
Which NetWorker Administrative interface is recommended?
- A . nsrwatch
- B . nsradmin
- C . NetWorker Management Console
- D . Backup and Recovery Manager
How should this be enforced?
- A . Client-side directive
- B . AES directive
- C . NetWorker user local directive
- D . Server-side directive
Which process needs to be running on each EMC NetWorker client?
- A . nsrd
- B . nsrexecd
- C . nsrjobd
- D . nsrmmd
An administrator is performing a directed recover to a Microsoft Windows cluster environment.
What is the role of the client that initiated the recovery?
- A . Destination client
- B . Administering client
- C . NMC client
- D . Source client
Which Dell EMC Networker daemon manages device operations on a storage node on behalf of the nsrd process?
- A . nsrmmgd
- B . nsrsnmd
- C . nsrmmdbd
- D . nsrmmd
You need to integrate snapshot technology on SAP backups in an EMC NetWorker environment.
Which module is required?
- A . PowerSnap
- B . SnapImage
- C . SnapView
- D . NMM
Which process is responsible for authenticating and processing the NetWorker Server remote execution requests?
- A . nsrd
- B . nsrdispd
- C . nsrexecd
- D . nsrmmd
A Dell EMC Networker Administrator always wants to perform a backup of the cluster virtual client data to its local storage node device.
How can this be achieved?
- A . List all storage nodes as part of the cluster under the "Storage Node" attribute of the virtual client resource.
- B . Ensure the "Storage Node" attribute under the virtual client resource is blank.
- C . Use the keyword "curphyhost" under the "Storage Node" attribute of the virtual client resource.
- D . Specify the local storage node for all physical client resources in the cluster.
Which Dell EMC NetWorker folder structure contains tracking information for each file backed up by a client called “Oracle_Host”?
- A . /nsr/index/db6
- B . /nsr/index/Oracle_Host/db6
- C . /nsr/index/Oracle_Host
- D . /nsr/index/db6/Oracle_Host
A customer has recently purchased a Data Domain appliance to use with EMC NetWorker as the primary storage. The backup administrator needs to configure EMC NetWorker so that multiple backups and recoveries can be performed from a single device at any given time.
What type of device should the backup administrator configure?
- A . AFTD
- B . LTO
- C . FTD
- D . NFS
A backup administrator has installed a NetWorker Server on a Windows 2019 host. The installation finished successfully. When the NMC Launcher started and the backup server’s name is specified as the NMC server, the following error is observed. Unable to connect the NMC server.
The administrator determined the NMC was not installed.
What is the recommended action to resolve the issue?
- A . Rerun the installation and enable the NMC option.
- B . Run the lgtonmc-[version].exe installation executables.
- C . Open a service request with Dell Technologies.
- D . Run the lgtoxtdcint-fversionJ.exe installation executable.
What is a consideration when performing a rollback restore with Dell EMC NetWorker Snapshot Management?
- A . Restoring from tape storage media can potentially take a long time
- B . Restore operation destroys all previously existing data on the target disk
- C . Restore operation requires that individual files to restore be selected
- D . Snapshot must be mounted on a storage node/mount host