DELL EMC D-NWG-FN-23 Dell Networking Foundations 2023 Online Training
DELL EMC D-NWG-FN-23 Online Training
The questions for D-NWG-FN-23 were last updated at Jul 18,2025.
- Exam Code: D-NWG-FN-23
- Exam Name: Dell Networking Foundations 2023
- Certification Provider: DELL EMC
- Latest update: Jul 18,2025
A network administrator is troubleshooting an OSPF routing issue. There are two paths to a destination network from one switch. In addition, one path is comprised of four 1 Gb links.
The other path is comprised of two 1 Gb and two 100 Mb links. The administrator ran several trace routes and notices that the packets are swapping back and forth between the two paths.
Which corrective action must be taken on the switch infrastructure to correct this issue?
- A . Manually specify the OSPF Router ID on each switch within the path.
- B . Break the paths into multiple OSPF areas.
- C . Change the reference speed used by OSPF in cost calculations on all switches within the path.
- D . Switch all routing protocols to RIPv2.
Which command shows active telnet sessions on Dell N-Series switches?
- A . Show hosts
- B . Show sessions
- C . Show users accounts
- D . Show line telnet
What criteria is used to determine STP root elections?
- A . Highest Port Numbers
- B . Lowest Router ID
- C . Lowest Bridge ID
- D . Highest Bandwidth
What is a valid subnet mask?
- A . 0.0.255.255
- B . 255.255.0.128
- C . 255.255.255.255
- D . 255.256.255.0
Which command enables the read-write network monitoring community string?
- A . #snmp-server community public ro
- B . #snmp-server community netmon rw
- C . #snmp-server community private wr
- D . #snmp-server community public read
Refer to the output:
console#show interfaces switchport te1/0/1 Port: Te1/0/1
VLAN Membership Mode: General Mode Access Mode VLAN: 1 (default)
General Mode PVID: 9 General Mode Ingress Filtering: Enabled General Mode
Acceptable Frame Type: Admit All
General Mode Dynamically Added VLANs: General Mode Untagged VLANs: 1, 9
General Mode Tagged VLANs: 10-11 General Mode Forbidden VLANs: Trunking
Mode Native VLAN: 1 (default)
Trunking Mode Native VLAN Tagging: Disabled Trunking Mode VLANs Enabled: All
Private VLAN Host Association: none Private VLAN Mapping:
Private VLAN Operational Bindings: Default Priority: 0
Protected: Disabled console#
What VLAN will untagged ingress traffic be assigned?
- A . VLAN 20
- B . VLAN 9
- C . VLAN 10
- D . VLAN 1
Which Dell EMC Networking M-Series 10 GbE switch model supports a VLT?
- A . MXL
- B . M6220
- C . M6348
- D . M8024-K
What is administrative distance value for default static routes?
- A . 0
- B . 1
- C . 10
- D . 20
What accurately describes the Network Time Protocol (NTP)?
- A . Implemented on a Dell EMC Network OS 6.
- B . Time synchronization algorithms do not account for clock drift
- C . Client synchronizes among a set of distributed time servers.
- D . Client makes sudden changes in time to keep synchronized.
What accurately describes the comparison between stacking and VLT?
- A . VLT allows for more physical devices to appear as one virtual device than stacking does.
- B . Stacked switches share a common control plane while VLT peers maintain their own control plane
- C . Stacked switches and VLT peers allow “single pane of glass” management by maintaining a single control plane.
- D . Both VLT and stacking allow devices to use different versions of firmware provided that the switch family/series is the same.
Latest D-NWG-FN-23 Dumps Valid Version with 221 Q&As
Latest And Valid Q&A | Instant Download | Once Fail, Full Refund
