CWNP CWS-100 Certified Wireless Specialist Online Training

Select Exam4Training is to choose success. Exam4Training CWNP CWS-100 Certified Wireless Specialist Online Training can help all candidates to pass the CWNP CWS-100 certification exam. Through the use of a lot of candidates, Exam4Training CWS Certification CWS-100 exam is a great response around candidates, and to establish a good reputation. This is turn out that select Exam4Training CWNP CWS-100 Certified Wireless Specialist Online Training is to choose success.

1. If created correctly, what document would define the available infrastructure services on an existing wired

network?

2. What 802.11 fast roaming solution allows a client to authenticate to a different AP than that to which it is

connected through the AP to which it is connected?

3. An organization wishes to ensure that a fairly even distribution of clients is spread across the installed APs.

What common vendor feature should be implemented to allow for this?

4. For what is the S1G (Sub-1 GHz) PHY (Physical Layer) most likely to be used?

5. Why must a cloud-managed AP have access to the Internet for initial setup?

6. Using Dynamic Rate Switching (DRS), when a client must change to a lower data rate, what best defines the action?

7. Where is an omnidirectional antenna typically placed for best results?

8. What statement best defines a staggered channel plan or multiple channel architecture (MCA)?

9. What should be used to manage an AP that requires direct web-based configuration?

10. Which one of the following is an example of a real-time communications application?

11. What is the maximum data rate specified in the 802.11 standard for the HT (802.11n) PHY (Physical Layer)?

12. An AP has two Ethernet wired networking ports. One (port 1) is labeled with a Power over Ethernet (PoE)

indicator and the other (port 2) is not.

What is unique about port 1 when compared to port 2?

13. What is the name given to the WPA2 implementation that uses a PSK (Pre-Shared Key)?

14. What is implemented in 802.11 networks to increase the probability that higher priority communications will occur before lower priority communications?

15. Which one of the following is an example of an antenna used mostly for bridge links?

16. 11 handsets?

17. When a WLAN must support only authorized users and no client device constraints exist, what security

solution should be used?

18. What is required for some 5 GHz channels that may prevent their consistent use near an airport?

19. Which one of the following is a non-deprecated security solution in the 802.11 standard?

20. What 802.11 PHY (Physical Layer) operates in 60 GHz?

21. What common vendor feature can be enabled to encourage client devices to use a 5 GHz connection instead of a 2.4 GHz connection?

22. As RF waves pass through materials, what usually occurs?

23. What kind of security constraint can always be legally enforced on an organization?

24. A tablet is a single stream client with one radio and one antennA.

What 802.11 features is definitely not

supported on this device?

25. In what frequency band does an 802.11g (ERP) device operate?

26. What user behavior is most likely to require Wi-Fi coverage between buildings on the same campus?

27. In what kind of BSS is a gate and portal used based in the 802.11 standard?

28. You have a switch supporting 802.3at and you must power an AP that is 40 meters from the switch.

What can be used to provide power to the AP?

29. Which one of the following is an example of a multi-band device?


 

Leave a Reply

Your email address will not be published. Required fields are marked *

You may use these HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <s> <strike> <strong>