CWNP CWNA-109 Certified Wireless Network Administrator Online Training
CWNP CWNA-109 Online Training
The questions for CWNA-109 were last updated at Apr 26,2024.
- Exam Code: CWNA-109
- Exam Name: Certified Wireless Network Administrator
- Certification Provider: CWNP
- Latest update: Apr 26,2024
You are onsite with a client to perform a post-deployment site survey. When verifying a multiple channel VoWiFi deployment using a VoWiFi handset, which aspect is most important?
- A . Performing protocol analysis with a single wireless adapter that is scanning all channels in use
- B . Testing a constant conversation or handset tone while roaming from area to area, or performing an active survey
- C . Configuring DSCP-to-802.11e QoS maps on the handset for each access category.
- D . Verifying the VHT functionality to handle the call volume incurred by a single VoIP phone call.
Which protocols can be used to tunnel 802.11 user traffic from access points to WLAN controllers or other centralized network servers? (Choose all that apply.)
- A . IPsec
- B . GRE
- C . CAPWAP
- D . DTLS
- E . VRRP
What is the traditional data-forwarding model for 802.11 user traffic when WLAN controllers are deployed?
- A . Distributed data forwarding
- B . Autonomous forwarding
- C . Proxy data forwarding
- D . Centralized data forwarding
- E . All of the above
You were previously onsite at XYZ’s facility to conduct a pre-deployment RF site survey. The WLAN has been deployed according to your recommendations and you are onsite again to perform, a post-deployment validation survey.
When performing this type of post-deployment RF site survey voice over Wi-Fi, what is an action that must be performed?
- A . Spectrum analysis to locate and identify RF interference sources.
- B . Frequency-band hopping analysis to detect improper RF channel implementations.
- C . Protocol analysis to discover channel use on neighboring APs.
- D . Application analysis with an active phone call on an VoWiFi handset.
In a long-distance RF link, what statement about Fade Margin is true?
- A . Fade Margin is an additional pad of signal strength designed into the RF system to compensate for unpredictable signal fading.
- B . The Fade Margin of a long-distance radio link should be equivalent to the receiver’s antenna gain.
- C . A Fade Margin is unnecessary on a long-distance RF link if more than 80% of the first Fresnel zone is clear of obstructions.
- D . The Fade Margin is a measurement of signal loss through free space, and is a function of frequency and distance.
When implementing an 802.1X/EAP RSN network with a VoWiFi solution, what is needed to avoid latency issues during roaming?
- A . Inter-Access Point Protocol
- B . Fast BSS Transition
- C . Distributed Coordination Function
- D . Roaming Coordination Function
- E . Lightweight APs
What are some results of multipath interference? (Choose all that apply.)
- A . Scattering delay
- B . Upfade
- C . Excessive retransmissions
- D . Absorption
In an 802.11n 2.4 GHz BSS, what prevents each station from using the full network data rate (e.g. 216.7 Mbps) for user data when multiple clients are actively exchanging data with the AP?
- A . Half of the bandwidth is allocated to uplink traffic and half to downlink traffic
- B . All data frames must be acknowledged and the medium is shared
- C . Radio receiver hardware cannot process data is quickly as it can be transmitted
- D . APs do not have sufficient wired connection speeds to the LAN, even at 1 Gbps connections, with 802.11n and earlier APs
A VoIP telephone is connected to a 24-port PoE midspan PSE.
If the telephone does not provide a classification signature, how much power will the PSE provide to the telephone?
- A . 12.95 watts
- B . 4.0 watts
- C . 7.0 watts
- D . 15.4 watts
Which of these measurements are taken for indoor coverage analysis? (Choose all that apply.)
- A . Received signal strength
- B . Signal-to-noise ratio
- C . Noise level
- D . Path loss
- E . Packet loss
Latest CWNA-109 Dumps Valid Version with 770 Q&As
Latest And Valid Q&A | Instant Download | Once Fail, Full Refund
