- All Exams Instant Download
Which set of commands configures the SPAN session?
An engineer needs to monitor ingress traffic that arrives at interface Ethernet 1/3 that belongs to a Cisco Nexus 5600 Series Switch. The traffic analyzer machine located at interface Ethernet 1/5 is already monitoring other production, and the traffic analyzer must not be impacted by the traffic captured from the...
Which action accomplishes this objective?
Refer to the exhibit. An engineer must distribute all the host ports to use all eight configured FEX uplinks. The solution must minimize disruption if an uplink fails. Which action accomplishes this objective?A . Set the pinning max-links value to 8B . Statically assign each host interface to a fabric...
Which configuration applies the changes for module 1 only?
The Cisco Nexus switch Generic Online Diagnostics policy for a PortLoopback test requires 10 consecutive failures to error disable the port. The customer wants to change it to 5 consecutive failures. Which configuration applies the changes for module 1 only? A . Option AB . Option BC . Option CD...
Which set of commands must be used to meet these requirements?
A Cisco MDS 9000 Series Switch is configured for SAN Analytics and SAN Telemetry Streaming. An engineer must enable analytics for NVMe on interfaces in the range of fc1/1-12. Due to a large amount of traffic generated in the SAN environment, the data must be collected at regular intervals of...
Which command meets these requirements?
Refer to the exhibit. A network engineer requires remote access via SSH to a Cisco MDS 9000 Series Switch. The solution must support secure access using the local user database when the RADIUS servers are unreachable from the switches. Which command meets these requirements?A . aaa authentication noneB . aaa...
Which backup type must be selected to meet these requirements?
An engineer needs to perform a backup of user roles and locales from Cisco UCS Manager to replicate the setting to a different fabric interconnect. The engineer wants to review the file before importing it to a target fabric interconnect. Which backup type must be selected to meet these requirements?A...
Which configuration must be applied to both Nexus switches to meet these requirements?
An engineer must configure OSPF routing on Cisco Nexus 9000 Series Switches. The IP subnet of the Eth 1/2 interface for both switches must be advertised via OSPF. However, these interfaces must not establish OSPF adjacency or send routing updates. The current OSPF adjacency over the interface Eth1/1 on SW1...
Which attribute must be used to assign the servers to different microsegments?
Several production and development database servers exist in the same EPG and IP subnet. The IT security policy is to prevent connections between production and development. Which attribute must be used to assign the servers to different microsegments?A . Data centerB . VMM domainC . VM nameD . IP addressView...
Which two commands are needed to complete the configuration?
Refer to the exhibit. Service degradation is reported on a VM that is deployed on a Cisco UCS blade server. The traffic from the vNIC is required to SPAN in both directions to a packet analyzer that is connected to UCS-A slot 2 port 12. Which two commands are needed...
Which set of actions accomplishes this goal?
Refer to the exhibit. A secure server that provides services to EPG-2 must be placed in EPG-1. The remaining EPGs―EPG-2, EPG-3. and EPG-4―must communicate without any contracts. Which set of actions accomplishes this goal? A . Option AB . Option BC . Option CD . Option DView AnswerAnswer: B
