- All Exams Instant Download
Which utility should be used?
An engineer needs a utility to translate traditional Nexus CLI inputs and generate Python code using XML and JSON message formats. The solution needs to be available on a Nexus 7700 series switch . Which utility should be used?A . NX-OS JSON-RPCB . NX-API SandboxC . Guest Shell for NX-OSD...
Which command reduces the amount of time it takes to complete the ISSU on a Cisco Nexus 7000 series switch that has dual supervisor modules and two I/O modules?
Which command reduces the amount of time it takes to complete the ISSU on a Cisco Nexus 7000 series switch that has dual supervisor modules and two I/O modules?A . install all kickstart <image>system<image>parallelB . install all epld bootflash:<image>C . install all epld bootflash:<image>D . install all kickstart<image>system<image>View AnswerAnswer: A...
Which configuration implements static ingress replication?
Which configuration implements static ingress replication? A . Option AB . Option BC . Option CD . Option DView AnswerAnswer: A Explanation: "Configuring Static Ingress Replication" section here: https://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus9000/sw/7-x/vxlan/configuration/guide/b_Cisco_Nexus_9000_Series_NX-OS_VXLAN_Configuration_Guide_7x/b_Cisco_Nexus_9000_Series_NX-OS_VXLAN_Configuration_Guide_7x_chapter_011.html
Which set of steps must be taken to meet these requirements?
A network engineer must perform a backup and restore of the Cisco Nexus 5000 Series Switch configuration. The backup must be made to an external backup server. The only protocol permitted between the Cisco Nexus switch and the backup server is UDP. The backup must be used when the current...
Which two commands should be configured to meet these requirements?
An engineer is implementing OTV on a transport that supports multicast. The solution needs to meet the following requirements: • Establish adjacency to the remote peer by using multicast. • Enable OTV advertisements for VLAN 100 to the other site. Which two commands should be configured to meet these requirements?...
Which set of commands must be used to meet these requirements?
A Cisco MDS 9000 Series Switch is configured for SAN Analytics and SAN Telemetry Streaming. An engineer must enable analytics for NVMe on interfaces in the range of fc1/1-12. Due to a large amount of traffic generated in the SAN environment, the data must be collected at regular intervals of...
Which type of IP address is used by the Cisco Fabric Services protocol?
Refer to the exhibit. Cisco Fabric Services is enabled in the network . Which type of IP address is used by the Cisco Fabric Services protocol?A . IPv4 unicast addressB . IPv4 multicast addressC . IPv4 gateway addressD . IPv4 anycast addressView AnswerAnswer: B Explanation: Reference: https://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus5000/sw/configuration/guide/fm/FabricManager/cfs.pdf
Which statement is true about the Deployment Immediacy for VMM domains associated to EPGs?
APIC EPG Resolution Immediacy is set to “Immediate”. Which statement is true about the Deployment Immediacy for VMM domains associated to EPGs?A . The “Immediate” and “On demand” options require a port group to be created on the VDC . If “On demand” is selected, the policy is programmed in...
Which Information must be included In the comma-separated value flit to provision the targets?
An engineer configures an intersignt virtual application and must claim over 200 targets. The engineer starts the Claim target procedure. The engineer has prepared this initial comma- separated value file to provision the targets: Which Information must be included In the comma-separated value flit to provision the targets?A . FQON,...
Which behavior defines streaming telemetry as a push model in Cisco devices?
Which behavior defines streaming telemetry as a push model in Cisco devices?A . Monitoring clients are pulling data from the network to see real-time statisticsB . JSON encoded telemetry data is transported using the gRPC protocolC . The network devices send data in JSON or GPB format to configured endpointsD...
