- All Exams Instant Download
Which configuration wizard fulfils this requirement?
An engineer must configure a centralized policy on a site in which all HTTP traffic should use the Public Internet circuit if the loss on this circuit is below 10%. otherwise MPLS should be used. Which configuration wizard fulfils this requirement?A . Create Applications or Groups of Interest > Configure...
Drag and drop the route verification output from show omp tlocs from the left onto the correct explanations on the right
DRAG DROP Drag and drop the route verification output from show omp tlocs from the left onto the correct explanations on the right. View AnswerAnswer:
Which value configures the router back to the default timer?
A vEdge platform is sending VRRP advertisement messages every 10 seconds. Which value configures the router back to the default timer?A . 2 secondsB . 3 secondsC . 1 secondD . 5 secondsView AnswerAnswer: C Explanation: Reference: https://sdwandocs.cisco.com/Product_Documentation/vManage_Help/Release_18.3/Config uration/Templates/VPN_Interface_Ethernet
How is the device name change tracked by operation and design teams?
Refer to the exhibit. vManage logs are available for the past few months. A device name change deployed mistakenly at a critical site. How is the device name change tracked by operation and design teams? A) B) C) A . Option AB . Option BC . Option CD . Option...
Which action resolves the issue?
Refer to the exhibit. The control connection is failing. Which action resolves the issue?A . import vSmart in vManagerB . Validate the certificates authenticity on vSmartC . Upload the WAN Edge list on vManage.D . Restore the reachability to the vSmartView AnswerAnswer: D Explanation: https://www.cisco.com/c/en/us/support/docs/routers/sd-wan/214509-troubleshoot-control-connections.html
Which command is used to verify the validity of the certificates?
An engineer is troubleshooting a certificate issue on vEdge. Which command is used to verify the validity of the certificates?A . show control local-propertiesB . show control summaryC . show certificate installedD . show certificate statusView AnswerAnswer: A Explanation: Reference: https://www.cisco.com/c/en/us/td/docs/routers/sdwan/command/sdwan-cr-book/operational-cmd.html#wp2835720000
Which configuration stops Netconf CLI logging on WAN Edge devices during migration?
Refer to the exhibit. Which configuration stops Netconf CLI logging on WAN Edge devices during migration? A . Option AB . Option BC . Option CD . Option DView AnswerAnswer: B Explanation: https://www.cisco.com/c/en/us/td/docs/routers/sdwan/command/sdwan-cr-book/config-cmd.html#wp3867250313
Which QoS treatment results from this configuration after the access list acl-guest is applied inbound on the vpn1 interface?
Refer to the exhibit. Which QoS treatment results from this configuration after the access list acl-guest is applied inbound on the vpn1 interface?A . A UDP packet sourcing from 172.16.20.1 and destined to 172.16.10.1 is acceptedB . A TCP packet sourcing from 172.16.10.1 and destined to 172.16.20.1 is droppedC ....
Which set of configurations accomplishes this task?
Refer to the exhibit. The ge0/0 interface connects to a 30-MB link. A network administrator wants to always have 10 MB available for high priority traffic. When lower-priority traffic busts exceed 20 MB. Traffic should be redirected to the second WAN interface ge0/1. Which set of configurations accomplishes this task?...
Which types of tunnels form when the WAN edge router connects to the SD-WAN fabric?
A network administrator is bringing up one WAN Edge for branch connectivity. Which types of tunnels form when the WAN edge router connects to the SD-WAN fabric?A . DTLS or TLS tunnel with vBond controller and IPsec tunnel with vManage controller.B . DTLS or TLS tunnel with vBond controller and...
