Cisco 300-610 Designing Cisco Data Center Infrastructure (DCID) Online Training
Cisco 300-610 Online Training
The questions for 300-610 were last updated at Sep 08,2025.
- Exam Code: 300-610
- Exam Name: Designing Cisco Data Center Infrastructure (DCID)
- Certification Provider: Cisco
- Latest update: Sep 08,2025
An engineer must design a multitenant solution using Cisco 7709 switches. The solution must support separate routing instances, separate spanning tree domains, and separate firewalls for each tenant.
Which solution meets these requirements?
- A . CFS
- B . VDC
- C . vPC
- D . VRF
A network consultant evaluates the Cisco UCS Fabric Interconnect SAN configuration, which must meet these requirements:
✑ All traffic must pass over the upstream device for switching and domain IDs must be preserved in the fabric.
✑ Each server should be pinned to one designated upstream interface and for the traffic to pass through the pinned port.
Which Fabric Interconnect SAN operational mode meets these requirements?
- A . end host
- B . switch
- C . NPIV
- D . Fibre Channel
What are two functions of a Network Services Orchestrator in an NFV environment? (Choose two.)
- A . It operates at the resource-facing services layer and provides overall lifecycle management at the network service level.
- B . It provides an API-based northbound interface for transparent integration with systems that operate at the resource-facing services layer.
- C . It provides a standards-based southbound interface for transparent integration with systems that operate at the customer-facing services layer.
- D . It provides a standards-based northbound interface for transparent integration with systems that operate at the customer-facing services layer.
- E . It operates at the customer-facing services layer and provides the management interface for the virtual network devices.
Refer to the exhibit.
An engineer is configuring a QoS policy with these requirements
✑ Match-all AF11 traffic and set it to a DSCP value of 14.
✑ The committed rate must be 10 Mbps with a committed burst rate of 1000 ms
✑ Drop any AF11 traffic that violates these settings.
✑ Any traffic other than af11 must have a DSCP value of 0
The given class-map configuration already exists.
Which solution must the engineer use to meet the requirements?
A)
B)
C)
D)
- A . Option A
- B . Option B
- C . Option C
- D . Option D
Refer to the exhibit.
In this scenario a Cisco engineer is building a loop-free topology where a dedicated layer of the vPC domain adjacent to the aggregation layer which also runs vPC Is used to interconnect the two data centers together. The engineer globally configures a vPC domain identifier on both vPC devices where the domain ID is the same on both peer devices.
Which action successfully forms the domain?
- A . Configure vPC-peer-keepalive link on both peer devices
- B . Put peer device interfaces into a suspended state.
- C . Enable and reuse an ISL Layer 3 trunk port channel
- D . Synchronize the MAC addresses for the member ports
A network consultant must design a high availability interconnection of a clustered Cisco UCS Fabric Interconnect toward two upstream Layer 2 switches. The Ethernet interconnection must use all redundant links and have no impact on the STP domain size.
Which connectivity solution must be used?
- A . Cisco UCS Fabric Interconnect in switch mode with dual uplinks distributed evenly to the upstream switches
- B . Cisco UCS Fabric Interconnect in switch mode with a single uplink toward each upstream switch to eliminate any change to the STP domain size
- C . Cisco UCS Fabric Interconnect in end host mode with a single uplink toward each upstream switch to eliminate any change to the STP domain size
- D . Cisco UCS Fabric Interconnect in end host mode with dual uplinks distributed evenly to the upstream switches
What is an advantage of Cisco HyperFlex Edge as compared to Cisco HyperFlex Standard Clusters?
- A . Cisco Intersight automatically creates an invisible cloud witness.
- B . Cisco UCS 5108 Blade Server chassis provides SEEPROM connectivity to solve split-brain scenarios.
- C . Cisco UCS Manager provides service profile portability across nodes.
- D . Cisco HyperFlex Edge provides native container support through the KVM hypervisor.
An engineer must implement an iSCSI storage connectivity in the existing Cisco UCS environment. The environment is based on Cisco UCS -Series rack server, Cisco Nexus 1000V Series Switches, and VMware ESXi hosts.
The implementation must meet these requirements:
✑ Provide multipathing and high availability in the event of a critical path failure.
✑ Be cost-effective and not require the purchase of new equipment.
Which two components must be selected to meet these requirements? (Choose two.)
- A . software iSCSI adapter
- B . storage binding
- C . uplink pinning
- D . system VLAN
- E . hardware iSCSI NIC
An engineer must connect a storage array directly to an existing Cisco UCS Fabric Interconnect. The customer requires a solution that provides IP-based storage that does not need to be connected through an external switch Also, the operations team wants to have the ability to have direct access to the files stored on the storage array from their Linux hosts.
Which storage technology meets these requirements?
- A . NAS
- B . SCSI
- C . FCoE
- D . SAN
An architect must automate routine tasks within a data center The data center exclusively uses Cisco Nexus Series Switches The networking team lacks proper programming knowledge and prefers an automation solution that leverages NXOS commands Any configuration change must use HTTPS for transport due to a security compliance requirement.
Which solution must the architect choose?
- A . NX-API
- B . Python-API
- C . Chef
- D . Terraform
Latest 300-610 Dumps Valid Version with 110 Q&As
Latest And Valid Q&A | Instant Download | Once Fail, Full Refund
