Cisco 300-365 Deploying Cisco Wireless Enterprise Networks Online Training
Cisco 300-365 Online Training
The questions for 300-365 were last updated at Oct 13,2025.
- Exam Code: 300-365
- Exam Name: Deploying Cisco Wireless Enterprise Networks
- Certification Provider: Cisco
- Latest update: Oct 13,2025
What devices can be tracked with the Cisco Context Aware Services?
- A . Only wired devices.
- B . Both wired and wireless devices.
- C . Only Cisco certified wireless devices.
- D . Only wireless devices.
A network engineer is viewing the QBSS information in a packet sniff.
Which two QBSS characteristics are crucial for successful troubleshooting? (Choose two.)
- A . When only WMM is enabled, information element number 1 QBSS Load information element is sent out in the beacons and probe responses.
- B . When only WMM is enabled, information element number 3 QBSS Load information element is sent out in the beacons and probe responses.
- C . When the client CAC limit is supported, information element number 2 is sent out in the beacons and probe responses on the bg radios.
- D . When the client CAC limit is supported, information element number 1 is sent out in the beacons and probe responses on the bg radios.
- E . When only WMM is enabled, information element number 2 QBSS Load information element is sent out in the beacons and probe responses.
You have just added a new MSE to Prime Infrastructure and want to synchronize the MSE with your 5508 WLC. which is located behind a firewall in a DMZ. You notice that NMSP messages are failing between the two devices.
What traffic needs to be allowed on the Firewall to ensure the MSE and WLC can communicate using NMSP?
- A . UDP 16113
- B . TCP 1613
- C . TCP 16113
- D . UDP 1613
A network engineer is configuring QoS and sees a DSCP value of 40. To which CoS value will this be mapped?
- A . 4
- B . 3
- C . 5
- D . 2
- E . 1
A network engineer must ensure that corporate wireless users have a better experience than guest wireless users.
Which two configurations fulfil requirement? (Choose two.)
- A . Override per-SSID bandwidth contracts on the corporate WLAN to reserve bandwidth.
- B . Modify the corporate WLAN to the Platinum QoS policy.
- C . Enable 802.1ptag on the Gold QoS pofccyto honor prioritized traffic.
- D . Adjust the guest WLAN radio policy to 80211 b/g only.
- E . Change the guest WLAN to the Bronze QoS policy.
A customer called into the support center with a problem ticket that involves wireless clients having to reauthenticate when they are walking around their office. After further investigation, it was discovered that the customer has two controllers in an N+1 deployment.
Which action must the engineer take to troubleshoot the issue?
- A . Verify that the wireless controllers are in the same mobility group and that the access points are all on the primary controller.
- B . Under the SSID, make sure that 802.1 Iris configured and running for the clients.
- C . Make sure that the SSID has the authentication set to 802.1x with Cisco Centralized Key Management so the data clients can roam seamlessly.
- D . Verify the access points are spread out between the primary and secondary controller and that the controllers are in the same mobility group.
Which two methods to discover a controller does a MAP attempt when it boots up? (Choose two.)
- A . |f Ethernet and wireless are available, it attempts to discover only via Ethernet.
- B . if Ethernet is disconnected, it attempts to connect wirelessly using AWPP.
- C . if only wireless is available and it is configured as a MAP, it does not attempt to connect to a WLC.
- D . If Ethernet and wireless are available, it uses Ethernet first. If it cannot connect via Ethernet, then it chooses wireless.
- E . |f Ethernet is disconnected, it attempts to connect wirelessly using the configured DHCP option.
After implementing mDNS gateway, a school’s network administrator notices that mDNS wireless printers are available over the whole network.
Which feature can the admin use to restrict the printer mDNS advertisements to the AP that the printer is joined to and adjacent APs?
- A . mDNS-AP
- B . SSO
- C . LSS
- D . Priority MAC
Scenario
There is a problem with the East-WLC-2504A. When configuration changes are made to the Employees-East-Wing AP Group that covers the East-Wing, none of the APs receive the updates. Referto the exhibits to determine where the problems are.
Note, not all menu items, text boxes, or radio buttons are active.
What needs to be changed in the configuration of the East-WLC-2504A controller to restore functionality to the Employees-East-Wing AP Group? (Choose four.)
- A . Change the AP in the Employees-East-Wing AP Group.
- B . Change the IP Address in the east-wing interface.
- C . Change the VLAN Identifier in the east-wing interface.
- D . D. Enable Dynamic AP Management in the east-wing interface.
- E . Change the Port Number to 2 in the east-wing interface.
- F . Add the Primary Controller and IP address to the 3700-East-Wing AP.
- G . Change the SSID in the Employees-East-Wing AP Group.
- H . Change the Interface/Interface Group In the Employees-East-Wing AP Group.
A client reports that video is not streaming. The administrator determines the client is connecting at a data rate of 12 Mbps and is trying to stream to a valid multicast address on the network.
What three items should the administrator check next to troubleshoot the issue? (Choose three)
- A . IGMP snooping is turned off because the client cannot request to join a group, only access points can.
- B . Video-stream for the multicast video is configured in the controller.
- C . WLAN has been set for a QoS value of Platinum.
- D . WLAN has been configured to allow multicast-direct to work correctly and multicast-direct has been enabled globally.
- E . WLAN has been set for a QoS value of Gold.
- F . RTSP is used to stream the video due to wireless multicast not using acknowledgements.
Latest 300-365 Dumps Valid Version with 127 Q&As
Latest And Valid Q&A | Instant Download | Once Fail, Full Refund
