Cisco 300-135 Troubleshooting and Maintaining Cisco IP Networks Online Training
Cisco 300-135 Online Training
The questions for 300-135 were last updated at Oct 23,2025.
- Exam Code: 300-135
- Exam Name: Troubleshooting and Maintaining Cisco IP Networks
- Certification Provider: Cisco
- Latest update: Oct 23,2025
Fault Condition is related to which technology?
- A . BGP
- B . NTP
- C . IP NAT
- D . IPv4 OSPF Routing
- E . IPv4 OSPF Redistribution
- F . IPv6 OSPF Routing
- G . IPv4 layer 3 security
Fault Condition is related to which technology?
- A . BGP
- B . NTP
- C . IP NAT
- D . IPv4 OSPF Routing
- E . IPv4 OSPF Redistribution
- F . IPv6 OSPF Routing
- G . IPv4 layer 3 security
65.200.0 0.0.0.255 area 12
command
D. redistribute the BGP routes into OSPF using the redistribute BGP 65001 subnet command.
Ticket 2 IP NAT
TROUBLE TICKET STATEMENT:
The implementation group has been using the test bed to do a ‘proof-of-concept’ that required both client 1 and client 2 to access the Web Server at 209.65.200.241. After several changed to interface status, network addressing, routing schemes and layer 2 connectivity, at trouble ticket has been opened indicating that client 1 cannot ping the 209.65.200.241 (internet Server).
The following information needs yourself show run:
Client 1 and Client 2 are not able to reach the WebServer at 209.65.200.241.
Initial troubleshooting shows
that DSW1, DSW2 and all the routers are able to reach the WebServer.
Configuration on R1
ip nat inside source list nat_pool interface s0/0/1 overload
ip access-list standard nat_pool
permit 10.1.0.0
permit 10.2.0.0
!
interface Serial0/0/1
ip address 209.65.200.225 255.255.255.252
ip nat inside
!
interface Serial0/0/0.12
ip address 10.1.1.1 255.255.255.252
ip nat inside
ip ospf message-digest-key 1 md5 TSHOOT
ip ospf authentication message-digest
On Which device is the fault condition located?
- A . R1
- B . R2
- C . R3
- D . R4
- E . DSW1
- F . DSW2
- G . ASW1
The Fault Condition is related to which technology?
- A . BGP
- B . NAT
- C . IP NAT
- D . IPv4 OSPF Routing
- E . IPv4 OSPF Redistribution
- F . IPv6 OSPF Routing
- G . IPv4 layer 3 security
What is the solution of the fault condition?
- A . Under the interface Serial0/0/0 configuration enter the ip nat inside command
- B . Under the interface Serial0/0/1 configuration enter the ip nat outside command
- C . Under interface Serial0/0/1 delete the “ip nat inside” command and add the “ip nat outside” command
- D . Under the ip access-list standar nat_trafic configuration enter the permit 209.65.200.0 0.0.0.255 command
Configuration on R1
ip nat inside source list nat_pool interface s0/0/1 overload
ip access-list standard nat_pool
permit 10.1.0.0
permit 10.2.0.0
!
interface Serial0/0/1
ip address 209.65.200.225 255.255.255.252
ip nat outside
!
interface Serial0/0/0.12
ip address 10.1.1.1 255.255.255.252
ip nat outside
ip ospf message-digest-key 1 md5 TSHOOT
ip ospf authentication message-digest
On Which device is the fault condition located?
Latest 300-135 Dumps Valid Version with 72 Q&As
Latest And Valid Q&A | Instant Download | Once Fail, Full Refund
