Cisco 300-075 Implementing Cisco IP Telephony & Video, Part 2 v1.0 Online Training
Cisco 300-075 Online Training
The questions for 300-075 were last updated at Oct 24,2025.
- Exam Code: 300-075
- Exam Name: Implementing Cisco IP Telephony & Video, Part 2 v1.0
- Certification Provider: Cisco
- Latest update: Oct 24,2025
Scenario:
There are two call control systems in this item. The Cisco UCM is controlling the Cisco Jabber for Windows Client, and the 7965 and 9971 Video IP Phone. The Cisco VCS is controlling the SX20, the Cisco TelePresence MCU, and the Cisco Jabber TelePresence for Windows
DP:
Locations:
CSS:
Movie Failure:
Movie Settings: CIPTV2 Topology: Subzone:
Links:
Pipe:
What two issues could be causing the Cisco Jabber Video for TelePresence failure shown in the exhibit? (Choose two)
- A . Incorrect username and password.
- B . Wrong SIP domain configured.
- C . User is not associated with the device.
- D . IP or DNS name resolution issue.
- E . CSF Device is not registered.
- F . IP Phone DN not associated with the user.
Scenario:
There are two call control systems in this item.
The Cisco UCM is controlling the Cisco Jabber for Windows Client, and the 7965 and 9971 Video IP Phone.
The Cisco VCS is controlling the SX20, the Cisco TelePresence MCU, and the Cisco Jabber TelePresence for Windows.
DP:
Locations:
CSS:
Movie Failure:
Movie Settings: CIPTV2 Topology: Subzone:
Links:
Pipe:
A third collaboration call fails between the backbone site and the HQ site. After reviewing the exhibits, which of the following reasons could be causing this failure?
- A . Not enough bandwidth has been allocated.
- B . Device Pool.
- C . Location.
- D . The pipe is not functioning.
Scenario:
There are two call control systems in this item.
The Cisco UCM is controlling the DX650, the Cisco Jabber for Windows Client, and the 9971 Video IP Phone.
The Cisco VCS and TMS control the Cisco TelePresence MCU, and the Cisco Jabber TelePresence for Windows.
DP:
Locations:
CSS:
SRST:
SRST-BR2-Config:
BR2 Config:
SRSTPSTNCall:
After adding SRST functionality the SRST does not work. After reviewing the exhibits, which of the following reasons could be causing this failure?
- A . Device Pool cannot be default.
- B . The Cisco UCM is pointing to the wrong IPv4 address of the BR router.
- C . The router does not support SRST.
- D . The SRST enabled router is not configured correctly.
Scenario:
There are two call control systems in this item.
The Cisco UCM is controlling the DX650, the Cisco Jabber for Windows Client, and the 9971 Video IP Phone.
The Cisco VCS and TMS control the Cisco TelePresence MCU, and the Cisco Jabber TelePresence for Windows.
DP:
Locations:
CSS:
SRST:
SRST-BR2-Config:
BR2 Config:
SRSTPSTNCall:
After configuring the CFUR for the directory number that is applied to BR2 phone (+442288224001), the calls fail from the PSTN.
Which two of the following configurations if applied to the router, would remedy this situation? (Choose two.)
- A . dial-peer voice 1 pots incoming called-number 228822… direct-inward-dial port 0/0/0:15
- B . dial-peer voice 1 pots incoming called-number 228822… direct-inward-dial port 0/0/0:13
- C . voice translation-rule 1 rule 1/˄228821….S//+44&/exit ! voice translation-profile pstn-in translate called 1 ! voice-port 0/0/0:15 translation-profile incoming pstn-in
- D . voice translation-rule 1 rule 1/˄228822….S//+44&/exit ! voice translation-profile pstn-in translate called 1 ! voice-port 0/0/0:15 translation-profile incoming pstn-in
- E . The router does not need to be configured.
Scenario:
There are two call control systems in this item.
The Cisco UCM is controlling the DX650, the Cisco Jabber for Windows Client, and the 9971 Video IP Phone.
The Cisco VCS and TMS control the Cisco TelePresence MCU, and the Cisco Jabber TelePresence for Windows
DP:
Locations:
CSS:
SRST:
SRST-BR2-Config:
BR2 Config:
SRSTPSTNCall:
Which device configuration option will allow an administrator to control bandwidth between calls placed between branches?
- A . Media Resource Group List
- B . Device Pool
- C . Location
- D . AAR Group
- E . Regions
Scenario:
There are two call control systems in this item. The Cisco UCM is controlling the DX650, the Cisco Jabber for Windows Client, and the 7965 and 9971 Video IP Phones. The Cisco VCS and TMS control the Cisco TelePresence Conductor, the Cisco TelePresence MCU, and the Cisco Jabber TelePresence for Windows.
DNS Server:
Device Pool:
Expressway:
ILS:
Locations:
MRA:
Speed Dial:
SIP Trunk:
Which three configuration tasks need to be completed on the router to support the registration of Cisco Jabber clients? (Choose three.)
- A . The DNS server has the wrong IP address.
- B . The internal DNS Service (SRV) records need to be updated on the DNS Server.
- C . Flush the DNS Cache on the client.
- D . The DNS AOR records are wrong.
- E . Add the appropriate DNS SRV for the Internet entries on the DNS Server.
Scenario:
There are two call control systems in this item.
The Cisco UCM is controlling the DX650, the Cisco Jabber for Windows Client, and the 7965 and 9971 Video IP Phones.
The Cisco VCS and TMS control the Cisco TelePresence Conductor, the Cisco TelePresence MCU, and the Cisco Jabber TelePresence for Windows.
DNS Server:
Device Pool:
Expressway:
ILS:
Locations:
MRA:
Speed Dial:
SIP Trunk:
The intercluster URI call routing no longer allows calls between sites.
What is the reason why this would happen?
- A . Wrong SIP domain configured.
- B . User is not associated with the device.
- C . IP or DNS name resolution issue.
- D . No SIP route patterns for cisco.lab exist.
Scenario:
There are two call control systems in this item.
The Cisco UCM is controlling the DX650, the Cisco Jabber for Windows Client, and the 7965 and 9971 Video IP Phones.
The Cisco VCS and TMS control the Cisco TelePresence Conductor, the Cisco TelePresence MCU, and the Cisco Jabber TelePresence for Windows.
DNS Server:
Device Pool:
Expressway:
ILS:
Locations:
MRA:
Speed Dial:
SIP Trunk:
What two tasks must be completed in order to support calls between the VCS controlled endpoints and the Cisco Unified CM endpoints? (Choose two.)
- A . Media Resource Group List.
- B . Configure a SIP trunk on the Cisco Unified CM to point to the Cisco VCS.
- C . Configure a neighbor zone on the Cisco Unified CM to point to the Cisco VCS.
- D . Configure a SIP trunk on the Cisco VCS to point to the Cisco Unified CM.
- E . Configure a neighbor zone on the Cisco VCS to point to the Cisco Unified CM.
A video endpoint is configured with SIP only.
What does a video endpoint use to register with the VCS Control?
- A . IP address
- B . SIP URI
- C . MAC address
- D . system name
Which zone will the VCS Control use to route calls to the VCS Expressway?
- A . neighbor zone
- B . DNS zone
- C . traversal client zone
- D . ENUM zone
Latest 300-075 Dumps Valid Version with 520 Q&As
Latest And Valid Q&A | Instant Download | Once Fail, Full Refund
